Skip to the content
2 layersUnplugged, the printed circuit board in 3D

Designed and simulated a Smart Dustbin & Smart Traffic Lights system using Arduino, ESP32, and sensors at DJSCE Unplugged 2.0. Features include automated lid, fill-level detection, adaptive traffic control, and emergency vehicle priority. Shortlisted in Top 40 teams, the only first-year team at this level. Future plans: ML integration & power optim

Copper layers
2
Thickness
1.6 mm
Parts
24
Nets
114
Pads
251
Tracks, vias
371, 44
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
8 Mar 2025
Updated
25 Mar 2025

Overview

Unplugged is an open-source printed circuit board by Kalash4152, from the Kalash4152/smart-dustbin-round-two repository on GitHub. It is a 2-layer board with 24 parts on 114 nets, routed with 371 tracks and 44 vias.

It is built around the ESP32-WROOM-32, BME280 and DHT11, with the MT3608, TP4056-42-ESOP8 and DS3231MZ+ among its other parts. Its parts include 9 ICs, 4 resistors, 2 diodes and 1 capacitor. It belongs with the sensors and measurement boards and the ESP32 boards of this library.

Main components

6

README

README.md

This project was developed as part of DJSCE Unplugged 2.0 – A Hardware Hackathon, where we designed and simulated a Smart Dustbin & Smart Traffic Lights system using Arduino, ESP32, and various sensors. The goal was to integrate IoT and automation to enhance urban infrastructure.

⚙️ Project Features 1️⃣ Smart Dustbin ✔️ Automated Lid Mechanism – Uses an ultrasonic sensor to detect nearby users and open the lid. ✔️ Fill-Level Detection – Monitors the dustbin's capacity using IR sensors and sends real-time data. ✔️ IoT Integration – Uses ESP32 to transmit fill-level data to a cloud server/dashboard. ✔️ Alerts & Optimization – Notifies waste collection teams when bins are full.

2️⃣ Smart Traffic Lights ✔️ Adaptive Signal Control – Uses IR sensors to measure traffic density and adjust light durations accordingly. ✔️ Emergency Vehicle Priority – Detects emergency vehicles via RFID and provides them a green corridor. ✔️ Remote Monitoring – Traffic data is sent to a cloud server for analysis and optimization.

🛠️ Tech Stack & Tools Microcontrollers: Arduino, ESP32 Sensors: Ultrasonic, IR, RFID Software & Simulation: Proteus, KiCad, Fusion 360 Programming: C++, Python Communication: Wi-Fi (ESP32), RFID 🔬 Development Process 📌 Phase 1: Idea & System Architecture Designed a detailed system architecture to ensure feasibility. Simulated the circuit using Proteus before hardware implementation. 📌 Phase 2: PCB Design Challenge Created PCB schematics and layouts using KiCad & Fusion 360 within a 4-hour challenge. Worked on component placement, routing, and optimization. 📈 Results & Achievements ✅ Shortlisted in the Top 40 teams out of numerous entries. ✅ Recognized as the only first-year team to compete at this level. ✅ Gained valuable experience in embedded systems, IoT, and PCB design.

🎯 Future Improvements 🔹 Optimize power consumption for better efficiency. 🔹 Enhance cloud integration for real-time monitoring and analytics. 🔹 Deploy ML models for predictive waste management & traffic optimization

Parts

24
QtyValueFootprintReferences
62VDiode_SMD:D_2512_6332Metric_Pad1.52x3.35mm_HandSolderSC1, SC2, SC3, SC4, SC5, SC6
31KResistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolderR1, R2, R3
2ESP32-WROOM-32RF_Module:ESP32-WROOM-32U3, U11
2LEDLED_SMD:LED_0201_0603Metric_Pad0.64x0.40mm_HandSolderD1, D2
2TP4056-42-ESOP8Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalViasU2, U6
110KResistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolderR4
1BME280Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumberingU1
1BatteryBattery:BatteryHolder_Keystone_103_1x20mmBT1
1CCapacitor_SMD:CP_Elec_3x5.4C1
1DHT11Sensor:Aosong_DHT11_5.5x12.0_P2.54mmU4
1DS3231MPackage_SO:SOIC-16W_7.5x10.3mm_P1.27mmU7
1MT3608Package_TO_SOT_SMD:SOT-23-6U10
1OLEDDisplay:NHD-C0220BiZU9
1POTPotentiometer_SMD:Potentiometer_ACP_CA6-VSMD_VerticalRV1

Similar boards

  • 2 layers85.1 × 65.4 mmTx module, the printed circuit board in 3D

    Tx module

    koushik12328/Smart_mining_helmet

    An ESP32-powered safety helmet featuring gas detection, impact sensing, and IoT connectivity

    27 partsMIT
  • 2 layers60 × 40.5 mmEnvironmental Monitoring Node, the printed circuit board in 3D

    Environmental Monitoring Node

    kothanikhil9/Environmental-Monitoring-Node

    The system continuously measures environmental temperature using a digital sensor and processes the data through a microcontroller.

    35 parts
  • 4 layers84.6 × 91 mmDatalogger, the printed circuit board in 3D

    Datalogger

    PriyaUdhayakumar/ESP32-Environmental-Monitoring-Data-Logger

    ESP32-based environmental monitoring data logger using BME280, DS3231 RTC, microSD card, ESP-IDF and FreeRTOS.

    49 parts
  • 2 layers49.4 × 95.7 mmPhysiowand, the printed circuit board in 3D

    Physiowand

    1tsMS/Physiowand

    91 parts
  • 4 layers41 × 90.2 mmAeropod2, the printed circuit board in 3D

    Aeropod2

    eyendamuri/aeropod

    An esp32 based mp3 player with the ability to play video too.

    67 parts
  • 4 layers26 × 19.1 mmCanSat, the printed circuit board in 3D

    CanSat

    TanujRai14/Sat_pcb_design

    This repository contains the PCB design files and documentation for a Can Satellite, featuring multiple environmental and orientation sensors, power management, and wireless communication capabilities.

    35 partsCERN-OHL-S-2.0
  • 2 layers45.5 × 57 mmSanjeevni PCB, the printed circuit board in 3D

    Sanjeevni PCB

    Sahil073/SIH_GLAH10_BrajCoders

    This directory contains the schematic design, printed circuit board (PCB) layout, 3D renderings, and manufacturing guidelines for the Sanjeevni wearable hardware prototype, designed using KiCad.

    37 parts

Questions

What parts does the Unplugged use?

24 parts, built around the ESP32-WROOM-32, BME280, DHT11 and MT3608. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Unplugged KiCad files?

From the Kalash4152/smart-dustbin-round-two repository on GitHub, at the commit this page was made from: the board is unplugged.kicad_pcb and its schematic unplugged.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Unplugged design in my own project?

Its repository states no licence, so its author keeps all rights: ask Kalash4152 before reusing the design.