
Esp32 rtc display
beer88/PCB-Projects-Kicad
This repository contains a collection of PCB design projects developed using KiCad, covering a range of applications in embedded systems, automation, and hardware development.

ESP32-based environmental monitoring data logger using BME280, DS3231 RTC, microSD card, ESP-IDF and FreeRTOS.
Datalogger is an open-source printed circuit board by PriyaUdhayakumar, from the PriyaUdhayakumar/ESP32-Environmental-Monitoring-Data-Logger repository on GitHub. It is a 4-layer board of 84.6 × 91 mm with 49 parts on 69 nets, routed with 391 tracks and 47 vias.
It is built around the ESP32-WROOM-32, BME280 and AMS1117-3.3, with the DS3231MZ+, TPD6E05U06RVZR and USBLC6-2SC6 among its other parts. Its parts include 12 capacitors, 10 resistors, 7 ICs, 4 connectors and 2 diodes. It belongs with the sensors and measurement boards and the ESP32 boards of this library.
An ESP32-based environmental monitoring data logger developed using ESP-IDF and C.
The system is designed to collect environmental parameters from a BME280 sensor, obtain date and time information from a DS3231 RTC, and store the measurements on a microSD card in CSV format.
The firmware is organized into independent modules for sensor handling, RTC, SD card, logging, UART and LED control.
┌──────────────┐
│ BME280 │
│ Temperature │
│ Humidity │
│ Pressure │
└──────┬───────┘
│ I2C
│
┌──────▼───────┐
│ ESP32 │
│ │
│ FreeRTOS │
│ Logger │
└───┬──────┬───┘
│ │
I2C│ │SPI
│ │
┌───────▼──┐ ┌─▼────────┐
│ DS3231 │ │ MicroSD │
│ RTC │ │ Card │
└──────────┘ └────┬─────┘
│
▼
data.csv| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C3, C6, C8, C9, C11, C12 |
| 7 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2, C4, C5, C7 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | 5.1K | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3, J4 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 22.1K | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | 47.5K | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U4 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_3002_1x2032 | BT1 |
| 1 | CP2102N-Axx-xQFN20 | Package_DFN_QFN:SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U7 |
| 1 | DS3231M | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U6 |
| 1 | D_TVS | Diode_SMD:D_SOD-323 | D2 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J2 |
| 1 | TPD6E05U06RVZ | Package_SON:Texas_R-PUSON-N14 | U5 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
The 45 most common of 49 parts.

beer88/PCB-Projects-Kicad
This repository contains a collection of PCB design projects developed using KiCad, covering a range of applications in embedded systems, automation, and hardware development.

Gleb-Vlasov/WeatherStation
WiFi-connected weather station on a custom ESP32 PCB — BME280 sensor, modular display, USB-C. Built from scratch in KiCad.

Kalash4152/smart-dustbin-round-two
Designed and simulated a Smart Dustbin & Smart Traffic Lights system using Arduino, ESP32, and sensors at DJSCE Unplugged 2.0.




sea2-dsi-fceia/PLACA_IOT_INDUSTRIAL
Placa de desarrollo para aplicaciones industriales IoT basada en ESP32 (Open Source)

It measures 84.6 × 91 mm and has 4 copper layers, 1.56 mm thick.
49 parts, built around the ESP32-WROOM-32, BME280, AMS1117-3.3 and DS3231MZ+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the PriyaUdhayakumar/ESP32-Environmental-Monitoring-Data-Logger repository on GitHub, at the commit this page was made from: the board is Hardware/datalogger.kicad_pcb and its schematic Hardware/datalogger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask PriyaUdhayakumar before reusing the design.