
ESP32-Environmental Monitoring System
Git-Saurav-Khyalia/ESP32-Environmental-Monitoring-System
An embedded environmental monitoring system built around the ESP32 microcontroller and DHT11 temperature and humidity sensor.

This directory contains the schematic design, printed circuit board (PCB) layout, 3D renderings, and manufacturing guidelines for the Sanjeevni wearable hardware prototype, designed using KiCad.
Sanjeevni PCB is an open-source printed circuit board by Sahil073, from the Sahil073/SIH_GLAH10_BrajCoders repository on GitHub. It is a 2-layer board of 45.5 × 57 mm with 37 parts on 54 nets, routed with 219 tracks and 27 vias.
It is built around the ESP32-WROOM-32, DHT11 and MT3608, with the ADXL343BCC, AMS1117-3.3 and MQ-6 among its other parts. Its parts include 11 capacitors, 8 resistors, 6 ICs, 2 connectors and 2 switches. It belongs with the ESP32 boards of this library.
This directory contains the schematic design, printed circuit board (PCB) layout, 3D renderings, and manufacturing guidelines for the Sanjeevni wearable hardware prototype, designed using KiCad.
| File / Folder | Type | Description |
|---|---|---|
Sanjeevni_PCB.kicad_sch | KiCad Schematic | Full schematic capture including power regulation, ESP32 core, sensor front-ends, and programming pads. |
Sanjeevni_PCB.kicad_pcb | KiCad Board Layout | 2-layer PCB layout routing power planes, high-frequency digital lines, and shielded analog tracks. |
Sanjeevni_PCB.kicad_pro | Project File | KiCad project configuration and library mappings. |
PCB schema.pdf | Schematic Export | High-resolution PDF export of the complete circuit schematic for easy review without KiCad installed. |
PCB design.pdf | Layout Export | High-resolution PDF export of the top and bottom copper layers, silkscreen, and drill guides. |
PCB_Schematic.pdf | Schematic Export | High-resolution PDF export of the complete circuit schematic for easy review without KiCad installed. |
PCB_Design.pdf | Layout Export | High-resolution PDF export of the top and bottom copper layers, silkscreen, and drill guides. |
PCB_Design_Guide.md | Engineering Guide | In-depth documentation detailing the Bill of Materials (BOM), trace width calculations, noise isolation, and step-by-step routing methodology. |
images/ | 3D Visualizations | Rendered views of the populated board: top view, isometric view 1, isometric view 2. |
images/ | 3D Visualizations | Rendered views of the populated board: top view, isometric view 1, isometric view 2. |
GND, 3V3, TX, RX, EN, IO0) are positioned along the board edge, allowing firmware programming via a removable pogo-pin jig before sealing.GPIO 21 SDA, GPIO 22 SCL) with 4.7 kΩ pull-up resistors and local 100 nF decoupling.GPIO 4).For the complete component catalog, KiCad symbol mappings, and step-by-step routing layout instructions, consult PCB_Design_Guide.md.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C4, C5, C7, C10, C11, C12 |
| 4 | 10K | Resistor_SMD:R_0402_1005Metric | R3, R4, R7, R8 |
| 2 | 4.7K | Resistor_SMD:R_0402_1005Metric | R2, R6 |
| 1 | 100 µF / 10V | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 100uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 10K | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 20K | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP2 |
| 1 | ADXL343 | Package_LGA:LGA-14_3x5mm_P0.8mm_LayoutBorder1x6y | U3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | BOOT / GPIO0 button | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW2 |
| 1 | Conn_01x03_Socket | Connector_PinSocket_2.00mm:PinSocket_1x03_P2.00mm_Horizontal | J4 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U5 |
| 1 | EN | TestPoint:TestPoint_Pad_1.5x1.5mm | TP4 |
| 1 | EN / RESET button | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U4 |
| 1 | GND | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1 |
| 1 | IO0 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP6 |
| 1 | LED | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | LiPo battery input (3.7V) | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | MQ-6 | Sensor:MQ-6 | U6 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | RX | TestPoint:TestPoint_Pad_1.5x1.5mm | TP3 |
| 1 | TX | TestPoint:TestPoint_Pad_1.5x1.5mm | TP5 |

Git-Saurav-Khyalia/ESP32-Environmental-Monitoring-System
An embedded environmental monitoring system built around the ESP32 microcontroller and DHT11 temperature and humidity sensor.

TanujRai14/Sat_pcb_design
This repository contains the PCB design files and documentation for a Can Satellite, featuring multiple environmental and orientation sensors, power management, and wireless communication capabilities.


koushik12328/Smart_mining_helmet
An ESP32-powered safety helmet featuring gas detection, impact sensing, and IoT connectivity


petersid2022/duthweatherstation
An Integrated Automatic Weather Station project using the FireBeetle 2 ESP32-E microcontroller. This repository contains the necessary code and documentation for setting up and operating a DIY weather monitoring system.

Madzigraphix/urbanbreathe
Overview An embedded system designed to monitor ambient air conditions in real time. It captures data on key pollutants and environmental parameters to assess air quality, classify hazard levels, and log or transmit…

MdAyanAkhtarKhan/env_monitoring_pcb
This project presents a real-time environmental monitoring system designed using KiCad. The system uses an ESP32 microcontroller to monitor temperature, humidity, and gas levels in the environment.
It measures 45.5 × 57 mm and has 2 copper layers, 1.6 mm thick.
37 parts, built around the ESP32-WROOM-32, DHT11, MT3608 and ADXL343BCC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Sahil073/SIH_GLAH10_BrajCoders repository on GitHub, at the commit this page was made from: the board is Hardware/Sanjeevni_PCB/Sanjeevni_PCB.kicad_pcb and its schematic Hardware/Sanjeevni_PCB/Sanjeevni_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Sahil073 before reusing the design.