Skip to the content
4 layers26 × 19.1 mmCanSat, the printed circuit board in 3D

This repository contains the PCB design files and documentation for a Can Satellite, featuring multiple environmental and orientation sensors, power management, and wireless communication capabilities.

Size
26 × 19.1 mm
Copper layers
4
Thickness
1.6 mm
Parts
35
Nets
86
Pads
224
Tracks, vias
348, 64
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 Jul 2025
Updated
17 Jul 2025

Overview

CanSat is an open-source printed circuit board by TanujRai14, from the TanujRai14/Sat_pcb_design repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 4-layer board of 26 × 19.1 mm with 35 parts on 86 nets, routed with 348 tracks and 64 vias.

It is built around the ESP32-WROOM-32, SX1278 and BMP280, with the DHT11, AMS1117 and MPU-6050 among its other parts. Its parts include 12 capacitors, 11 resistors, 9 ICs, 2 diodes and 1 crystal. It belongs with the ESP32 boards of this library.

Main components

8

README

README.md

Can Satellite PCB Design

This repository contains the PCB design files and documentation for a Can Satellite, featuring multiple environmental and orientation sensors, power management, and wireless communication capabilities. The board is designed for compactness and reliability, suitable for satellite and high-altitude balloon missions.


Sensors Integrated

  • BMP280: Pressure and temperature sensor
  • MPU6050: Accelerometer and gyroscope
  • LM35: Analog temperature sensor
  • MQ135: Air quality/gas sensor
  • DHT11: Temperature and humidity sensor

Key Components

  • ESP32
    • Handles main processing
    • Supports I2C and SPI communication for peripherals
  • TP4056 Charging Module
    • Li-ion battery charging management
  • AMS1117
    • 3.3V voltage regulator
  • LoRa SX1278
    • Long-range wireless communication module

PCB Design Details

  • Track Widths

    • 5V Supply: 0.5 mm
    • 3.3V Supply: 0.3 mm
    • Signal Traces: 0.2 mm
  • Layer Stackup

    • Top Layer: Signals and GND
    • First Inner Layer: GND plane
    • Second Inner Layer: Power plane
    • Bottom Layer: Signals and 5V pad

Power Management

  • Input: Li-ion battery (managed by TP4056)
  • Regulation: AMS1117 provides 3.3V for logic and sensors
  • Separate power and ground planes for noise reduction and stable operation

Communication

  • LoRa SX1278 for long-range, low-power wireless data transmission
  • ESP32 serves as the central controller, interfacing with sensors and modules via I2C/SPI

Notes

  • Carefully matched track widths for power and signal integrity
  • Dedicated inner layers for ground and power to minimize noise
  • Suitable for CubeSat, CanSat, and other small satellite or experimental payloads

Photos

image image image image image

Parts

35
QtyValueFootprintReferences
410uCapacitor_SMD:C_0805_2012MetricC1, C4, C6, C9
31kResistor_SMD:R_0805_2012MetricR1, R3, TH1
32kResistor_SMD:R_0805_2012MetricR5, R7, R8
2.1uFCapacitor_SMD:C_0805_2012MetricC8, C12
2100nFCapacitor_SMD:C_0805_2012MetricC5, C10
210kResistor_SMD:R_0805_2012MetricR4, R6
24.7KResistor_SMD:R_0805_2012MetricR9, R10
2LEDLED_SMD:LED_0805_2012MetricD1, D2
1.5Resistor_SMD:R_0805_2012MetricR2
110nFCapacitor_SMD:C_0805_2012MetricC7
110uCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC2
12.2nFCapacitor_SMD:C_0805_2012MetricC11
122uCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC3
1AMS1117Package_TO_SOT_SMD:SOT-223-3_TabPin2U3
1BMP280Package_LGA:Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumberingU6
1CrystalCrystal:Crystal_SMD_Abracon_ABM7-2Pin_6.0x3.5mmY1
1DHT11Sensor:Aosong_DHT11_5.5x12.0_P2.54mmU5
1ESP32-WROOM-32RF_Module:ESP32-WROOM-32U9
1LM35-DPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU1
1MPU-6050Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mmU7
1MQ-6Sensor:MQ-6U2
1SX1278Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mmU8
1TP4056-42-ESOP8Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalViasU4

Similar boards

  • 2 layersMetrhseis, the printed circuit board in 3D

    Metrhseis

    petersid2022/duthweatherstation

    An Integrated Automatic Weather Station project using the FireBeetle 2 ESP32-E microcontroller. This repository contains the necessary code and documentation for setting up and operating a DIY weather monitoring system.

    13 parts2
  • 2 layers85.1 × 65.4 mmTx module, the printed circuit board in 3D

    Tx module

    koushik12328/Smart_mining_helmet

    An ESP32-powered safety helmet featuring gas detection, impact sensing, and IoT connectivity

    27 partsMIT
  • 2 layers57 × 73.5 mmESP32-Environmental Monitoring System, the printed circuit board in 3D

    ESP32-Environmental Monitoring System

    Git-Saurav-Khyalia/ESP32-Environmental-Monitoring-System

    An embedded environmental monitoring system built around the ESP32 microcontroller and DHT11 temperature and humidity sensor.

    7 parts
  • 2 layers45.5 × 57 mmSanjeevni PCB, the printed circuit board in 3D

    Sanjeevni PCB

    Sahil073/SIH_GLAH10_BrajCoders

    This directory contains the schematic design, printed circuit board (PCB) layout, 3D renderings, and manufacturing guidelines for the Sanjeevni wearable hardware prototype, designed using KiCad.

    37 parts
  • 2 layers38 × 90 mmSIH Smart Irrigation System, the printed circuit board in 3D

    SIH Smart Irrigation System

    Arshsingh1602/Smart-Irrigation-System

    This is our project of SIH 2024 in which we developed a smart irrigation system that can be used to control the under and overuse of water in the feild of farmer.

    30 partsMIT
  • 2 layersPlaca senores, the printed circuit board in 3D

    Placa senores

    Stefxyz/Robot-Explorador-Tabibito

    Robot explorador estilo Rover

    65 parts
  • 4 layers71.4 × 80.3 mmEx2, the printed circuit board in 3D

    Ex2

    zaidhajji/Custom-Flight-Controller-Design-STM32F407-KiCad

    Designed a custom flight controller board from schematic to layout: STM32F407VGTx MCU, MPU6050 IMU, BMP280 barometer, MicroSD logging, 6 servo/ESC outputs, and dual-stage power regulation.

    93 parts
  • 4 layers40 × 60.5 mmArctrack, the printed circuit board in 3D

    Arctrack

    leeeeeeeeeeeeee2/arctrack

    a model rocket flight computer

    55 partsGPL-3.0

Questions

How big is the CanSat PCB?

It measures 26 × 19.1 mm and has 4 copper layers, 1.6 mm thick.

What parts does the CanSat use?

35 parts, built around the ESP32-WROOM-32, SX1278, BMP280 and DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CanSat KiCad files?

From the TanujRai14/Sat_pcb_design repository on GitHub, at the commit this page was made from: the board is CanSat.kicad_pcb and its schematic CanSat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the CanSat design in my own project?

Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).