Skip to the content
2 layers86.3 × 76.1 mmMacropad Half life, the printed circuit board in 3D

Macropad Half life

KYUUBYZ/Tetrapack1

A 9 keys macropad, high pulling polling rate

Size
86.3 × 76.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
32
Pads
103
Tracks, vias
174, 12
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
5 Oct 2026
Updated
19 Oct 2026

Overview

Macropad Half life is an open-source printed circuit board by KYUUBYZ, from the KYUUBYZ/Tetrapack repository on GitHub. It is a 2-layer board of 86.3 × 76.1 mm with 25 parts on 32 nets, routed with 174 tracks and 12 vias.

It is built around the RP2040-ZERO. Its parts include 10 switches, 9 diodes, 2 capacitors, 2 resistors and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.

Main components

1

README

README.md

Tetrapack

ItemQtySupplierCost/itemTotal Costlink
LEOBOG Reaper Switch1Aliexpress$4.69$4.69Link
20mm Plum handle1Aliexpress$3.18$3.18Link
Display OLED 0,911Aliexpress$4.11$4.11Link
Rp 2040 Zero1Aliexpress$3.88$3.88Link
Estimated total shipping1$16.16
image

TETRAPACK is a 9 keys, high pulling rate macropad, it exists because people (like me) needs shortcuts to things like programs, aps or maybe even channels on discord, or just use it for geometry dash (what I will do) or OSU.

The simbols schematic:

image

The PCB schematic: image

It's a high pulling rate (1000hz) macropad, it's this fast because it uses a certain USB-c propriety useful for projects like this, everything about it (the code) is in src/host

Parts

25
QtyValueFootprintReferences
9DDiode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1, D2, D3, D4, D5, D6, D7, D8, D9
9SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.25u_PCBSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9
210nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2
24.7KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
1ER_OLEDM0.91_1x-I2CDisplay:ER_OLEDM0.91_1x-I2CU1
1RP2040-ZeroRP2040-Zero-Kicad-main:RP2040-ZeroRZ1
1RotaryEncoderRotary_Encoder:RotaryEncoder_Alps_EC12E_Vertical_H20mmSW10

Similar boards

  • 2 layers132.3 × 94.9 mmCheapino, the printed circuit board in 3D

    Cheapino

    tompi/cheapino

    An affordable split 36 keys keyboard

    59 parts1.2kCC-BY-4.0
  • 2 layers321 × 92.3 mmMx40, the printed circuit board in 3D

    Mx40

    zzeneg/stront

    Split keyboards with 38 or 40 keys, LCD display and Cirque trackpad

    181 parts353MIT
  • 2 layers255.9 × 99.3 mmZerosprey42, the printed circuit board in 3D

    Zerosprey42

    beekeeb/zerosprey42

    Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.

    96 parts140
  • 2 layers146.3 × 69.5 mmStress, the printed circuit board in 3D

    Stress

    GroooveBob/Stress

    Pocket Arcade Fight Pad

    22 parts102MIT
  • 2 layers54 × 64 mmDonConIOmini, the printed circuit board in 3D

    DonConIOmini

    ravinrabbid/DonCon2040

    RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers

    96 parts66MIT
  • 2 layers52 × 50 mmRP2040-TestPatternGenerator VGA, the printed circuit board in 3D

    RP2040-TestPatternGenerator VGA

    nmur/RP2040-TestPatternGenerator

    A simple test pattern generator running on the RP2040 microcontroller

    12 parts64GPL-3.0
  • 2 layers120 × 40 mmBuinchiez40, the printed circuit board in 3D

    Buinchiez40

    ChrisChrisLoLo/bunchiez40

    A pocket keyboard that makes use of mouse switches to achieve a miniscule size

    90 parts56GPL-3.0
  • 2 layers305.2 × 76.2 mmSoroka, the printed circuit board in 3D

    Soroka

    kapee1/soroka

    40% DIY-keyboard with base kit support

    126 parts47Unlicense

Questions

How big is the Macropad Half life PCB?

It measures 86.3 × 76.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Macropad Half life use?

25 parts, built around the RP2040-ZERO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Macropad Half life KiCad files?

From the KYUUBYZ/Tetrapack repository on GitHub, at the commit this page was made from: the board is Macropad Half life.kicad_pcb and its schematic Macropad Half life.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Macropad Half life design in my own project?

Its repository states no licence, so its author keeps all rights: ask KYUUBYZ before reusing the design.