
ElectronULA
adbsolutions/ElectronULA
Project to create replacement ULA board for Acorn Electron

Kit didático FPGA baseado no Intel MAX 10
Kit Altera rev0 is an open-source printed circuit board by Jonas-Chaves, from the Jonas-Chaves/Kit_MAX10_FPGA repository on GitHub, published under the MIT licence. It is a 2-layer board of 99 × 80 mm with 115 parts on 145 nets, routed with 1,863 tracks and 181 vias.
It is built around the 10M08SCE144C8G, AP62301WU and BAV99, with the BC547 among its other parts. Its parts include 50 capacitors, 39 resistors, 7 diodes, 4 connectors and 3 ICs. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.

Este repositório contém os arquivos de desenvolvimento de um kit didático de FPGA baseado no dispositivo Intel MAX 10 10M08SCE144C8G.
O projeto tem como objetivo desenvolver uma plataforma de baixo custo para estudos de dispositivos FPGA, permitindo a realização de experimentos envolvendo descrição de hardware em VHDL, lógica digital, interfaces de entrada e saída e desenvolvimento de sistemas embarcados.
O kit foi desenvolvido como parte do Trabalho de Conclusão de Curso (TCC) em Engenharia da Computação.
A família Intel MAX 10 foi escolhida devido aos recursos integrados de memória Flash de configuração, PLLs e conversor analógico-digital, permitindo desenvolver aplicações sem necessidade de memórias externas de configuração. :contentReference[oaicite:0]{index=0}
├── Hardware │ ├── KiCad │ │ ├── Esquemático │ │ ├── PCB │ │ └── Bibliotecas │ ├── FPGA │ ├── Quartus Project │ ├── Código VHDL │ └── Arquivos de configuração │ ├── Documentação │ ├── Datasheets │ ├── Imagens │ └── Relatórios │ └── README.md
O circuito eletrônico foi desenvolvido utilizando o software KiCad, incluindo:
A placa foi projetada considerando boas práticas de projeto para sistemas digitais de alta velocidade, incluindo capacitores de desacoplamento próximos aos pinos de alimentação do FPGA e plano de referência GND.
O projeto FPGA foi desenvolvido utilizando:
Exemplo de validação inicial:
| Ferramenta | Utilização |
|---|---|
| KiCad | Desenvolvimento do hardware e PCB |
| Intel Quartus Prime Lite | Síntese, compilação e programação FPGA |
| VHDL | Descrição do hardware |
| Git/GitHub | Controle de versão |
Hardware.Abrir o projeto Quartus.
Selecionar o dispositivo: 10M08SCE144C8G
Compilar o projeto.
Programar o FPGA utilizando a interface JTAG.
O protótipo desenvolvido foi validado através da programação do FPGA e testes funcionais dos recursos implementados.
Os testes demonstraram o funcionamento das alimentações, comunicação JTAG e execução de projetos VHDL no dispositivo Intel MAX 10.
Jonas Chaves
Engenharia da Computação
Projeto desenvolvido como Trabalho de Conclusão de Curso.
Este projeto está disponibilizado para fins acadêmicos e educacionais.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 35 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C24, C25, C26, C27, C28, C29 +19 |
| 22 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R10, R11, R12, R22, R23, R26, R27, R30, R31, R34, R35, R36, R39 +6 |
| 7 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18, C20, C23, C36, C39, C42, C51 |
| 6 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP7 |
| 5 | 22uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C19, C21, C22, C40, C41 |
| 5 | 33R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17, R18, R21, R24, R25 |
| 4 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R19, R28, R32 |
| 4 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R20, R37, R38 |
| 4 | BAV99 | Package_TO_SOT_SMD:SOT-23 | D1, D2, D3, D4 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D5, D6, D7 |
| 2 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | AP62301WU | Package_TO_SOT_SMD:TSOT-23-6 | U2, U3 |
| 2 | ASE-xxxMHz | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y1, Y2 |
| 2 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | Conn_02x28_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x28_P2.54mm_Vertical | J1, J2 |
| 1 | 1.5K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | 10M08SCE144C8G | MAX10_10M08SC:QFP50P2200X2200X165-145N | U1 |
| 1 | 2.2uH | Inductor_SMD:L_Neosid_SM-PIC0602H | L2 |
| 1 | 21.5K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R33 |
| 1 | 3.3uH | Inductor_SMD:L_Neosid_SM-PIC0602H | L1 |
| 1 | 31.6K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R29 |
| 1 | 330R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C37 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J3 |
| 1 | USB_B_Micro | 10118192_0001LF:AMPHENOL_10118192-0001LF | J5 |

adbsolutions/ElectronULA
Project to create replacement ULA board for Acorn Electron

doppelhub/Honda_Insight_LiBCM
Replacement BCM for G1 Honda Insight Lithium Conversion

OakwoodEngineering/ObiWanKomputer
The Obi Wan Komputer and Combined Payload Boards from the NyanSat project.


WAFFLE-Systems/PEC_Sensor
Electrical schematics and PCB gerber files for the Pulsed Eddy Current Sensor

NJIT-Highlander-Racing-Electrical/CVT-Tachometer
A subsystem that measures the RPM of the primary and secondary on the CVT

NJIT-Highlander-Racing-Electrical/Power
This repository is meant to have all of the research relating to power systems for the vehicle.

tanaes/OvoEasy_incubator_controller
KiCad design for the OvoEasy incubator controller board
It measures 99 × 80 mm and has 2 copper layers, 1.6 mm thick.
115 parts, built around the 10M08SCE144C8G, AP62301WU, BAV99 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Jonas-Chaves/Kit_MAX10_FPGA repository on GitHub, at the commit this page was made from: the board is Kit_Altera_rev0.kicad_pcb and its schematic Kit_Altera_rev0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).