2 layers247.7 × 127 mm
Euclid36
sadekbaroudi/euclid36
At the time of creation, using Kicad 5.1.9 - This may not work with future versions
130 parts24
2 layers123.8 × 95.3 mm
Ahoy pcb
JayWhyOkay/ahoy_macropad2Numpad with macropad column (codename: Ahoy!)
- Size
- 123.8 × 95.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 93
- Nets
- 78
- Pads
- 373
- Tracks, vias
- 710, 53
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210424)
- Created
- 19 May 2021
- Updated
- 13 Dec 2024
Overview
Ahoy pcb is an open-source printed circuit board by JayWhyOkay, from the JayWhyOkay/ahoy_macropad repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 123.8 × 95.3 mm with 93 parts on 78 nets, routed with 710 tracks and 53 vias.
It is built around the ATMEGA32U4-AU and USBLC6-2SC6. Its parts include 33 diodes, 10 resistors, 8 capacitors, 3 connectors and 2 ICs. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
README
README.mdAhoy -- XT Macropad
Ahoy is a simple but functional macropad designed for people who need both a numpad and a macro column for work/productivity. The features include:
- Numpad with split mod support
- 10 additional keys for macros
- Rotary encoder support on top left key
- 8 addressable RGB LEDs
- Num, Caps, Scroll Lock Indicator LEDs
- USB C (USB 2.0)
The layout for the macropad can be seen below:
Instructions
To replicate the PCB and the case, the guide can be found below:
Project Status
- Design PCB
- Design Case
- Order Prototypes
- Create bootloader
- Create QMK/VIA firmware
- Revise prototypes
Todo List
- Revise LED cutouts on acrylic case
- (Optional) add art/silkscreen
- Clear @todo 's
- Update to modern QMK standards!
Licensing
The following project was built on Gondolindrim's Acheron Project and ai03's PCB guide and design files. As such, the licensing will follow their licensing arrangement on top of this project's licensing, which can be found here.
Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +14 |
| 30 | MX-NoLED | ai03 MX Only Footprints:MXOnly-1U-NoLED | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX17, MX18, MX19, MX20, MX21, MX22, MX23, MX24 +14 |
| 4 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C4, C5, C6, C16 |
| 3 | 5K | Resistor_SMD:R_0805_2012Metric | R7, R8, R9 |
| 3 | LED_Small | ai03 Random Parts:LED_D3.0mm-Pretty | D31, D32, D33 |
| 3 | MX-NoLED | ai03 MX Only Footprints:MXOnly-2U-ReversedStabilizers-NoLED | MX16, MX32, MX33 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 5.1K | Resistor_SMD:R_0805_2012Metric | R5, R6 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | ATmega32U4-A | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | Conn_01x03_Female | Acheron Connectors:PinHeader_1x3_staggered_P2.54mm_Vertical | J2 |
| 1 | Polyfuse_Small | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | Rotary_Encoder_Switch_Chassis | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_CircularMountingHoles | SW2 |
| 1 | SW_Push | JayWhyOkay Footprints:SW_TS-1187A-B-A-B | SW1 |
| 1 | TC2030-AVR | Acheron Connectors:PinHeader_2x3_P2.54mm_Vertical | P1 |
| 1 | TYPE-C-31-M12_13 | Acheron Connectors:TYPE-C-31-M-12 | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
Similar boards
- 2 layers304.8 × 95.3 mm
65 keyboard untitled
eightbitraptor/65_keyboard_untitled
My as yet unnamed 65% keyboard design
150 parts15 - 2 layers254 × 140 mm
- 4 layers286.3 × 133.3 mm
Phnx
sini6a/phnx
PHNX is an ergonomic keyboard featuring 54 MX compatible switches. It is inspired by the Miryoku layout and includes one additional row at the top along with macro keys on both sides.
186 parts4 - 4 layers59 × 93 mm
HurdyGurdy PCB
palexander23/HurdyGurdy-PCB
This repository contains PCB design files, that will go towards the eventual creation of an electronic Hurdy Gurdy.
49 parts3 - 2 layers160 × 120 mm
- 2 layers136 × 135 mm
Re mf3d
Zokhoi/mf3dre
Reverse engineered schematics and PCB design of DJTechTools Midi Fighter 3D
143 parts2 - 2 layers275.9 × 117.8 mm
Reform2-keyboard3
jackhumbert/reform
This is the main repository for the MNT Reform open source laptop.
379 parts1
Questions
How big is the Ahoy pcb PCB?
It measures 123.8 × 95.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ahoy pcb use?
93 parts, built around the ATMEGA32U4-AU and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ahoy pcb KiCad files?
From the JayWhyOkay/ahoy_macropad repository on GitHub, at the commit this page was made from: the board is ahoy_pcb/ahoy_pcb.kicad_pcb and its schematic ahoy_pcb/ahoy_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ahoy pcb design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).