

HurdyGurdy PCB
This repository contains PCB design files, that will go towards the eventual creation of an electronic Hurdy Gurdy.
- Size
- 59 × 93 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 72
- Pads
- 262
- Tracks, vias
- 630, 78
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Sep 2021
- Updated
- 30 Jan 2022
Overview
HurdyGurdy PCB is an open-source printed circuit board by palexander23, from the palexander23/HurdyGurdy-PCB repository on GitHub. It is a 4-layer board of 59 × 93 mm with 49 parts on 72 nets, routed with 630 tracks and 78 vias.
It is built around the ATMEGA32U4-AU, XC9572XL-10VQG44C and USBLC6-2SC6, with the XC6206P332MR among its other parts. Its parts include 14 capacitors, 12 connectors, 8 resistors, 4 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) and FPGA and CPLD boards of this library.
Main components
4ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)XC9572XL-10VQG44C
QFP-44(10x10)QFP-44(10x10) Programmable Logic Device (CPLDs/FPGAs) ROHSAMD/XILINXProgrammable Logic Device (CPLDs/FPGAs)USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)XC6206P332MR
SOT-23-40℃~+85℃@(Ta) 1 1uA 200mA 3.3V 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdElectronic Hurdy Gurdy PCB
This repository contains PCB design files, that will go towards the eventual creation of an electronic Hurdy Gurdy.
This is a stand-in README that will likely be rewritten once the project starts taking off.
I do not intend this project to be seen widely, it's just a place for me to keep stuff.
This project was heavily inspired by the Digi-Gurdy and much of the mechanical design for my instrument will likely be drawn from there.
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C5, C6, C8, C9, C10, C13 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C5, C7, C12 |
| 3 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R4 |
| 2 | 12p | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 4.99k | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 1 | 10u | Inductor_SMD:L_1206_3216Metric | L1 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 250 mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 600 @ 100MHz | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | ATmega32U4-AU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | Crank | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J7 |
| 1 | GPIO | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-8-5.08_1x08_P5.08mm_Horizontal | J8 |
| 1 | HWB | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | I2C | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J9 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J5 |
| 1 | JTAG | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | STAT_LED | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J10 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J1 |
| 1 | VBUS | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J12 |
| 1 | XC6206P332MR | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | XC9572XL-10VQG44C | XC9572XL-10VQG44C:VQFP-44 | U4 |
| 1 | YELLOW | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | key_row_0 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-8-5.08_1x08_P5.08mm_Horizontal | J2 |
| 1 | key_row_1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-8-5.08_1x08_P5.08mm_Horizontal | J3 |
| 1 | key_row_2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-8-5.08_1x08_P5.08mm_Horizontal | J4 |
| 1 | nReset | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | nReset_Button | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J11 |
Similar boards
- 2 layers17.8 × 35.6 mm

- 2 layers17.8 × 35.6 mm

- 2 layers85 × 56 mm

Econet AtoMMC
kgl2001/Atom_Econet_AtoMMC
Combined AtoMMC & Econet interface board for Acorn Atom
40 parts1CC-BY-SA-4.0 - 2 layers52 × 50.5 mm

- 2 layers25.4 × 94 mm

Xilinix programming adapter
djtersteegc/xilinx-xc9500xl-programming-adapter
Xilinx XC9500XL programming adapter, for PLCC44 and QFP44 to DIP44 sockets
16 partsMIT - 2 layers98.2 × 35 mm

Fc660c
evyd13/fc660c-controller
Custom FC660C controller with USB-C based on hasu's design
30 parts22CC-BY-SA-4.0 - 2 layers100 × 100 mm

- 2 layers82.3 × 35.5 mm

Questions
How big is the HurdyGurdy PCB PCB?
It measures 59 × 93 mm and has 4 copper layers, 1.6 mm thick.
What parts does the HurdyGurdy PCB use?
49 parts, built around the ATMEGA32U4-AU, XC9572XL-10VQG44C, USBLC6-2SC6 and XC6206P332MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HurdyGurdy PCB KiCad files?
From the palexander23/HurdyGurdy-PCB repository on GitHub, at the commit this page was made from: the board is pcbs/mainboard/mainboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the HurdyGurdy PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask palexander23 before reusing the design.