

Econet AtoMMC
Combined AtoMMC & Econet interface board for Acorn Atom
- Size
- 85 × 56 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 82
- Pads
- 286
- Tracks, vias
- 880, 67
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Dec 2022
- Updated
- 4 Oct 2023
Overview
Econet AtoMMC is an open-source printed circuit board by kgl2001, from the kgl2001/Atom_Econet_AtoMMC repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 85 × 56 mm with 40 parts on 82 nets, routed with 880 tracks and 67 vias.
It is built around the PIC18F4525-E/P, XC9572XL-10VQG44C and 74LVC125AD, with the AMS1117-3.3 among its other parts. Its parts include 12 capacitors, 7 connectors, 6 resistors, 4 ICs and 2 diodes. It belongs with the FPGA and CPLD and PIC boards of this library.
Main components
4PIC18F4525-E/P
PDIP-40-40℃~+125℃ 10bit 1KB 25MHz 3.8KB 36 4.2V~5.5V 48KB 8 Bit Built-in FLASH PIC PDIP-40 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)XC9572XL-10VQG44C
QFP-44(10x10)QFP-44(10x10) Programmable Logic Device (CPLDs/FPGAs) ROHSAMD/XILINXProgrammable Logic Device (CPLDs/FPGAs)74LVC125AD
SOP-14L-40℃~+125℃ 1 1.65V~5.5V 2.6ns@5V,15pF 4 40uA 50mA 50mA 74LVC Schmitt trigger Tri-State Unidirectional SOP-14L Buffers, Drivers, Receivers, Transceivers ROHSMDDBuffers, Drivers, Receivers, TransceiversAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7 |
| 4 | 3K3 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm | H1, H2, H3, H4 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C8, C9, C10 |
| 2 | 10K0 | Resistor_SMD:R_Array_Concave_4x0603 | RN1, RN2 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C11, C12 |
| 2 | 330R | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 1 | 10MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 74LVC125 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | IC3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J5 |
| 1 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | Conn_01x17 | Connector_PinSocket_2.54mm:PinSocket_1x17_P2.54mm_Vertical | J1 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J8 |
| 1 | Conn_02x10_Odd_Even | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J4 |
| 1 | DIN-5 / RJ45 | Econet_AtoMMC:CombinedDIN5RJ45PinHeader90Deg | SK1 |
| 1 | Green | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | Micro_SD_Card_Det | Econet_AtoMMC:SUNTECH_ST-TF-003A | J9 |
| 1 | PIC18F4525 | Package_DIP:DIP-40_W15.24mm_Socket | IC1 |
| 1 | Red | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | SW_DIP_x08 | Button_Switch_SMD:SW_DIP_SPSTx08_Slide_Omron_A6S-810x_W8.9mm_P2.54mm | SW1 |
| 1 | XC9572XL-10VQG44C | Package_QFP:TQFP-44_10x10mm_P0.8mm | IC2 |
Similar boards
- 2 layers17.8 × 35.6 mm

- 2 layers25.4 × 94 mm

Xilinix programming adapter
djtersteegc/xilinx-xc9500xl-programming-adapter
Xilinx XC9500XL programming adapter, for PLCC44 and QFP44 to DIP44 sockets
16 partsMIT - 4 layers59 × 93 mm

HurdyGurdy PCB
palexander23/HurdyGurdy-PCB
This repository contains PCB design files, that will go towards the eventual creation of an electronic Hurdy Gurdy.
49 parts3 - 2 layers52 × 50.5 mm

- 2 layers17.8 × 35.6 mm

- 2 layers40.3 × 75.7 mm

- 2 layers29.5 × 22 mm

CE Makerverse MicroSD Card Adapter
CoreElectronics/CE-Makerverse-MicroSD-Card-Adapter
This is the repo for the Core Electronics Makerverse™ MicroSD Card Adapter.
31 parts5 - 2 layers32.4 × 25.5 mm

Questions
How big is the Econet AtoMMC PCB?
It measures 85 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Econet AtoMMC use?
40 parts, built around the PIC18F4525-E/P, XC9572XL-10VQG44C, 74LVC125AD and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Econet AtoMMC KiCad files?
From the kgl2001/Atom_Econet_AtoMMC repository on GitHub, at the commit this page was made from: the board is KiCAD Files/Econet_AtoMMC.kicad_pcb and its schematic KiCAD Files/Econet_AtoMMC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Econet AtoMMC design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).