

Relay driver
🔗 Yüksek Performanslı Röle Sürücü Devresi
- Size
- 55 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 19
- Pads
- 68
- Tracks, vias
- 181, 7
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 20 Jul 2026
- Updated
- 12 Aug 2026
Overview
Relay driver is an open-source printed circuit board by IremAktas95, from the IremAktas95/relay_driver repository on GitHub. It is a 2-layer board of 55 × 55 mm with 34 parts on 19 nets, routed with 181 tracks and 7 vias.
It is built around the INA199A1DCK, G5RL-1A-E-HR DC24 and NDT3055L. Its parts include 11 resistors, 6 connectors, 4 diodes, 1 capacitor and 1 IC. It belongs with the home automation and IoT boards of this library.
Main components
3INA199A1DCK
SC-70-6-300mV~26V -40℃~+105℃ 0.4V/us 0.5uV/℃ 1 120dB 14kHz 2.7V~26V 25nV/√Hz@1kHz 28uA 50V/V 5uV 65uA High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Analog output interface、Input filter、Built-in comparator ±26V SOT-363(SC-70-6) Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense AmplifiersG5RL-1A-E-HR DC24
DIP-40℃~+85℃ 1 Set Normally Open: 1A (SPST NO) 1.44kΩ 100mΩ 15ms 16A 16A@250VAC、16A@24VDC 24V 24V@DC、250V@AC 400mW 5ms Silver Alloy DIP Power Relays ROHSOmronPower RelaysNDT3055L
SOT-223-55℃~+150℃ 1 N-channel 100mΩ@4.5V 17nC 3V 3W 4A 50pF 530pF 60V SOT-223 MOSFETs ROHSTECH PUBLICMOSFETs
README
README.mdrelay_driver
relay_driver_circuits
🔗 Yüksek Performanslı Röle Sürücü Devresi
Bu proje, güvenilir ve stabil anahtarlama işlemleri için tasarlanmış bir röle sürücü (relay driver) kartıdır. Tasarımın şematik ve PCB layout aşamaları KiCad EDA kullanılarak gerçekleştirilmiş olup, devrenin elektriksel tepki ve performansı fiziksel üretime geçilmeden önce LTspice üzerinde simülasyonlarla doğrulanmıştır. Tasarımın prototip üretimi tamamlanmıştır.
Proje Özellikleri
- Simülasyon Destekli Doğrulama: Devrenin tepki süresi, kararlılığı ve geçici hal (transient) davranışları LTspice kullanılarak simüle edilmiş ve tasarımsal güvenilirlik maksimize edilmiştir.
- Dayanıklı Anahtarlama Altyapısı: Zorlu sistem gereksinimleri (askeri/aviyonik standartlar) göz önünde bulundurularak güvenli yalıtım, bobin ters emk (flyback) koruması ve verimli sürme işlemi hedeflenmiştir.
- Fiziksel Prototipleme: Tasarımın ardından devrenin donanımsal prototip üretimi gerçekleştirilmiştir.
Kullanılan Araçlar
- Donanım Tasarımı: KiCad EDA
- Devre Simülasyonu: LTspice
Şematik Tasarım
Devrenin sürme mantığını ve izolasyon katmanlarını içeren şematik tasarım:
PCB Layout
Komponent yerleşimi ve sinyal/güç hatlarının yönlendirildiği PCB tasarımı:
3D Görünüm
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad_MP | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 2 | 0R | Resistor_SMD:R_0805_2012Metric | R7, R11 |
| 2 | 100 | Resistor_SMD:R_0805_2012Metric | R6, R8 |
| 2 | LED | LED_SMD:LED_1206_3216Metric | D3, D4 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 3.3K | Resistor_SMD:R_1210_3225Metric | R1 |
| 1 | 3.3k | Resistor_SMD:R_1210_3225Metric | R3 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 400k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 680m | Resistor_SMD:R_2512_6332Metric | R10 |
| 1 | Control_Input | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2 |
| 1 | Current_Sensor_Output | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J3 |
| 1 | G5RL-1A-E-HR_DC24 | SamacSys_Parts:G5RL1AEHRDC24 | K1 |
| 1 | GND_Test | TestPoint:TestPoint_Pad_1.5x1.5mm | GND |
| 1 | INA199a1DCK | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | Load_Port | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J6 |
| 1 | Load_Test | TestPoint:TestPoint_Pad_1.5x1.5mm | Load |
| 1 | Logic_Power_Input | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J4 |
| 1 | Mcu_Signal_Test | TestPoint:TestPoint_Pad_1.5x1.5mm | Signal |
| 1 | NDT3055L | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q2 |
| 1 | Power_Input | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1 |
| 1 | Power_Test | TestPoint:TestPoint_Pad_1.5x1.5mm | 24V |
| 1 | Red_LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | Relay_Output_Contacts | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J5 |
| 1 | SS310-DO214AC-HT | Diode_SMD:D_SMA | D2 |
Similar boards
- 2 layers65 × 56 mm

- 4 layers

MagneticLevitation
dweggg/MagneticLevitation
My take on one of those active magnetic levitation projects.
149 parts - 4 layers96 × 80 mm

- 4 layers58.2 × 59.4 mm

WLED MOUSE
Richard42Graham/WLED-MOUSE
A WLED pcb for use with a microphone, and some othere bits, mainly for workshops and decoration.
21 parts1MIT - 4 layers90 × 78 mm

Ion Concentration Biomodulator
GeneralCybernetics/Ion-Concentration-Biomodulator
PCB Designs and Documentation for a ion concentration biomodulator that induces HEK293T cells to reprogram and dedifferentiate into stem cells
37 parts - 2 layers110 × 46 mm

Rover panel supervisor
karimf1/rover-panel-pcb
This repository is continuation of rover panel repo. Power panel PCB layout is implemented in KiCAD based of AutoCAD version of rover panel .
106 partsMIT - 2 layers70 × 55 mm

Uv bench
L-A-7/Electronic-design
Learning workspace for electronics and PCB design (KiCad 10, STM32): UV bench and following projects
90 parts - 2 layers89 × 60 mm

Questions
How big is the Relay driver PCB?
It measures 55 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Relay driver use?
34 parts, built around the INA199A1DCK, G5RL-1A-E-HR DC24 and NDT3055L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Relay driver KiCad files?
From the IremAktas95/relay_driver repository on GitHub, at the commit this page was made from: the board is relay_driver.kicad_pcb and its schematic CurrentSense.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Relay driver design in my own project?
Its repository states no licence, so its author keeps all rights: ask IremAktas95 before reusing the design.