

FSNS APPS-2025
- Size
- 89 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 66
- Pads
- 240
- Tracks, vias
- 471, 96
- Pours
- 17
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Dec 2025
- Updated
- 18 Jan 2026
Overview
FSNS APPS-2025 is an open-source printed circuit board by nedrg0, from the nedrg0/FSNS-APPS-2025 repository on GitHub, published under the MIT licence. It is a 2-layer board of 89 × 60 mm with 73 parts on 66 nets, routed with 471 tracks and 96 vias.
It is built around the STM32F103C8T6, NDT3055L and PR12-12V-360-1A. Its parts include 24 capacitors, 14 resistors, 11 diodes, 8 ICs and 5 connectors. It belongs with the STM32 boards of this library.
Main components
3STM32F103C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 20KB 2V~3.6V 32 Bit 37 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)NDT3055L
SOT-223-55℃~+150℃ 1 N-channel 100mΩ@4.5V 17nC 3V 3W 4A 50pF 530pF 60V SOT-223 MOSFETs ROHSTECH PUBLICMOSFETsPR12-12V-360-1A
插件-40℃~+85℃ 1 Set Normally Open: 1A (SPST NO) 10ms 12V 15A 28V@DC、250V@AC 5ms Silver Alloy 插件 Power Relays ROHSCUIPower Relays
README
README.mdFSNS-APPS-2025
Accelerator pedal position sensor interface board for a Formumla Student vehicle.
Main Features
- Reads signals from two linear displacement sesnors and checks for implausability,
- Realy output if a fault is detected,
- CAN Communication
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C9, C12, C13, C14, C15 |
| 8 | 1K | Resistor_SMD:R_0402_1005Metric | R2, R6, R7, R8, R11, R12, R13, R14 |
| 8 | LED | LED_SMD:LED_0603_1608Metric | D8, D9, D10, D11, PA6, PA7, PB0, PB1 |
| 6 | 1u | Capacitor_SMD:C_0603_1608Metric | C7, C8, C16, C18, C20, C23 |
| 4 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C17, C19, C21, C24 |
| 4 | LM1117-Q1 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4, U5, U6, U8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_Pad | H1, H2, H3, H4 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C10, C11 |
| 2 | 4k7 | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | Conn_01x03_Pin | MOLEX Micro-Fit 3.0 43045:CONN_SD-43650-006_03_MOL | J2, J3 |
| 2 | D_TVS | Diode_SMD:D_0603_1608Metric | D1, D2 |
| 2 | MCP6001-OT | Package_TO_SOT_SMD:SOT-23-5 | U2, U3 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric | R_B1 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C22 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 120R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 120R | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 330R | Resistor_SMD:R_0402_1005Metric | R_B2 |
| 1 | Conn_01x04_Pin | MOLEX Micro-Fit 3.0 43045:CONN_SD-43045-005_04_MOL | J1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J4 |
| 1 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Horizontal | J5 |
| 1 | D | Diode_SMD:D_1206_3216Metric | D7 |
| 1 | NDT3055L | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q1 |
| 1 | PR12-12V-360-1A | PR12-12V-360-1A:RELAY_PR12-12V-360-1A | K1 |
| 1 | STM32F103C8T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3S-1000 | SW1 |
| 1 | TCAN3404-Q1 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.71x3.4mm | U7 |
Similar boards
- 4 layers96 × 80 mm

- 4 layers58.2 × 59.4 mm

WLED MOUSE
Richard42Graham/WLED-MOUSE
A WLED pcb for use with a microphone, and some othere bits, mainly for workshops and decoration.
21 parts1MIT - 4 layers90 × 78 mm

Ion Concentration Biomodulator
GeneralCybernetics/Ion-Concentration-Biomodulator
PCB Designs and Documentation for a ion concentration biomodulator that induces HEK293T cells to reprogram and dedifferentiate into stem cells
37 parts - 2 layers55 × 55 mm

- 2 layers110 × 46 mm

Rover panel supervisor
karimf1/rover-panel-pcb
This repository is continuation of rover panel repo. Power panel PCB layout is implemented in KiCAD based of AutoCAD version of rover panel .
106 partsMIT - 2 layers70 × 55 mm

Uv bench
L-A-7/Electronic-design
Learning workspace for electronics and PCB design (KiCad 10, STM32): UV bench and following projects
90 parts - 4 layers90 × 60 mm

Board a
ruckusmattster/xtm-led-driver
A HDR LED driver with ESPHome integration focused on driving a 36V 1.4A LED
206 partsMIT - 2 layers40 × 40 mm

Component transistor mosfet n channel ruggedized
probably-Erwins-Cat/Circuit-Nodes
Circuit Nodes is an educational tool shared under CC BY-NC-SA 4.0 to help students understand electronic circuits by physically building them.
18 parts3
Questions
How big is the FSNS APPS-2025 PCB?
It measures 89 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FSNS APPS-2025 use?
73 parts, built around the STM32F103C8T6, NDT3055L and PR12-12V-360-1A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FSNS APPS-2025 KiCad files?
From the nedrg0/FSNS-APPS-2025 repository on GitHub, at the commit this page was made from: the board is FSNS_APPS_2025.kicad_pcb and its schematic FSNS_APPS_2025.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FSNS APPS-2025 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).