
Esp32 ina237
HeyPCB/esp32-sensors-2
ESP32-S3 boards, one sensor each: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0

ESP32-S3 boards, one sensor each: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0
Esp32 mpr121 is an open-source printed circuit board by HeyPCB, from the HeyPCB/esp32-sensors-2 repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 4-layer board of 30 × 48 mm with 27 parts on 61 nets, routed with 373 tracks and 43 vias.
It is built around the ESP32-S3-WROOM-1-N16R8, MPR121QR2 and AP2112K-3.3TRG1, with the USBLC6-2SC6, CC0603KRX7R9BB104 and CL21A106KAYNNNE among its other parts. Its parts include 9 resistors, 8 capacitors, 4 ICs, 2 diodes and 2 connectors. It belongs with the sensors and measurement boards and the ESP32 boards of this library.
50 ESP32-S3 boards, one sensor each: IMUs, accelerometers, magnetometers, Hall and angle sensors, distance, touch, optical and current monitors. KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0.
Every board is the same ESP32-S3 template with one sensor: ESP32-S3-WROOM-1-N16R8 (16 MB flash, 8 MB PSRAM, Wi-Fi + Bluetooth LE), USB-C with native USB and an ESD clamp, an AP2112K 3.3 V LDO, BOOT and RESET buttons, power and user LEDs; 30 x 48 mm, 4 layers.
| Wiring | ESP32-S3 pin |
|---|---|
| I2C SDA / SCL | IO8 / IO9 |
| Sensor interrupt | IO7 |
| Analog in | IO1 (ADC1 channel 0) |
| SPI SCK / MOSI / MISO / CS | IO12 / IO11 / IO13 / IO10 |
| Digital / 1-Wire / PDM | IO4, IO5, IO6 |
| User LED | IO48 |
| Board | Sensor | DRC errors / unconnected / parity |
|---|---|---|
| S3 A1324 | Allegro A1324 low-noise linear Hall sensor | 0 / 0 / 0 |
| S3 A3214 | Allegro A3214 micropower omnipolar Hall switch | 0 / 0 / 0 |
| S3 ADS1115 | TI ADS1115 16-bit 4-channel ADC | 0 / 0 / 0 |
| S3 ADXL343 | ADI ADXL343 3-axis accelerometer | 0 / 0 / 0 |
| S3 ADXL345 | ADI ADXL345 3-axis accelerometer | 0 / 0 / 0 |
| S3 AH1806 | Diodes AH1806 omnipolar Hall switch | 0 / 0 / 0 |
| S3 AS5047D | ams AS5047D 14-bit magnetic encoder (SPI and ABI) | 0 / 0 / 0 |
| S3 AS5600 | ams AS5600 12-bit magnetic angle sensor | 0 / 0 / 0 |
| S3 QT1010 | Microchip AT42QT1010 single-key capacitive touch sensor | 0 / 0 / 0 |
| S3 BNO055 | Bosch BNO055 9-axis absolute orientation sensor | 0 / 0 / 0 |
| S3 BPW34 | Vishay BPW34 through-hole silicon photodiode light sensor | 0 / 0 / 0 |
| S3 BPW34S | Osram BPW34S silicon photodiode light sensor | 0 / 0 / 0 |
| S3 CNY70 | Vishay CNY70 reflective optical sensor | 0 / 0 / 0 |
| S3 DRV5032 | TI DRV5032 ultra-low-power Hall switch | 0 / 0 / 0 |
| S3 DRV5055 | TI DRV5055 ratiometric linear Hall sensor | 0 / 0 / 0 |
| S3 DRV5055A2 | TI DRV5055A2 ratiometric linear Hall sensor (+-31 mT) | 0 / 0 / 0 |
| S3 FLAME | Everlight PD333-3C infrared photodiode flame sensor | 0 / 0 / 0 |
| S3 ICM-20602 | TDK ICM-20602 6-axis IMU | 0 / 0 / 0 |
| S3 ICM-20948 | TDK ICM-20948 9-axis IMU | 0 / 0 / 0 |
| S3 ICM-42688 | TDK ICM-42688-P high-precision 6-axis IMU | 0 / 0 / 0 |
| S3 IIM-42652 | TDK IIM-42652 industrial 6-axis IMU | 0 / 0 / 0 |
| S3 IIS3DWB | ST IIS3DWB wideband vibration sensor (6 kHz) | 0 / 0 / 0 |
| S3 INA219 | TI INA219 load current and voltage monitor | 0 / 0 / 0 |
| S3 INA226 | TI INA226 load current, voltage and power monitor | 0 / 0 / 0 |
| S3 INA233 | TI INA233 PMBus current, voltage, power and energy monitor | 0 / 0 / 0 |
| S3 INA237 | TI INA237 85 V current, voltage and power monitor | 0 / 0 / 0 |
| S3 INA238 | TI INA238 85 V high-precision power monitor | 0 / 0 / 0 |
| S3 KX022 | Kionix KX022-1020 3-axis accelerometer | 0 / 0 / 0 |
| S3 LIS2DH12 | ST LIS2DH12 ultra-low-power 3-axis accelerometer | 0 / 0 / 0 |
| S3 LIS2HH12 | ST LIS2HH12 3-axis accelerometer | 0 / 0 / 0 |
| S3 LIS2MDL | ST LIS2MDL 3-axis magnetometer | 0 / 0 / 0 |
| S3 LIS3DH | ST LIS3DH 3-axis accelerometer with ADC inputs | 0 / 0 / 0 |
| S3 LIS3MDL | ST LIS3MDL 3-axis magnetometer | 0 / 0 / 0 |
| S3 LSM6DS3 | ST LSM6DS3TR-C 6-axis IMU | 0 / 0 / 0 |
| S3 LSM6DSL | ST LSM6DSL 6-axis IMU | 0 / 0 / 0 |
| S3 LSM6DSOX | ST LSM6DSOX 6-axis IMU with machine-learning core | 0 / 0 / 0 |
| S3 MPR121 | NXP MPR121 12-channel capacitive touch controller | 0 / 0 / 0 |
| S3 MPU-6000 | InvenSense MPU-6000 6-axis IMU (SPI and I2C) | 0 / 0 / 0 |
| S3 MPU6050 | InvenSense MPU-6050 6-axis IMU | 0 / 0 / 0 |
| S3 18B20Z | MY18B20Z 1-Wire temperature sensor (SOIC-8) | 0 / 0 / 0 |
| S3 SFH320 | ams OSRAM SFH 320 SMD phototransistor light sensor | 0 / 0 / 0 |
| S3 SM351LT | Honeywell SM351LT nanopower magnetoresistive switch | 0 / 0 / 0 |
| S3 SS49E | SS49E linear Hall effect sensor | 0 / 0 / 0 |
| S3 TEPT4400 | Vishay TEPT4400 ambient light phototransistor | 0 / 0 / 0 |
| S3 TLV493D | Infineon TLV493D 3D magnetic sensor | 0 / 0 / 0 |
| S3 TMAG5111 | TI TMAG5111 2D Hall latch (rotary encoder sensor) | 0 / 0 / 0 |
| S3 TSOP38238 | Vishay TSOP38238 38 kHz IR remote-control receiver | 0 / 0 / 0 |
| S3 VL53L0X | ST VL53L0X 2 m time-of-flight distance sensor | 0 / 0 / 0 |
| S3 ToF | VL53L1X 4 m time-of-flight distance sensor | 0 / 0 / 0 |
| S3 VL53L4CD | ST VL53L4CD 1.3 m time-of-flight distance sensor | 0 / 0 / 0 |
Not fabricated, assembled or powered. Every number in a board's README is measured by KiCad 10 on the files in its folder (report.json); parts carry LCSC numbers and were in JLCPCB's stock on the date each README gives.
Each board folder holds kicad/ (project), fab/ (Gerbers zip, BOM, CPL, STEP, schematic PDF), media/ (renders) and board.json (the brief it was generated from).
Designed with the HeyPCB method on KiCad 10 by heypcb-kicad's headless pipeline with Freerouting 2.4.1.
CERN-OHL-S-2.0, © 2026 heypcb.ai. See LICENSE.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C6 |
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C7, C8 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R6 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 75k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | Blue (IO48) | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | ELECTRODES | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J2 |
| 1 | ESP32-S3-WROOM-1-N16R8 | RF_Module:ESP32-S3-WROOM-1 | U3 |
| 1 | Green (PWR) | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | MPR121QR2 | Package_DFN_QFN:UQFN-20_3x3mm_P0.4mm | U4 |
| 1 | RESET | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 1 | USB-C | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |

HeyPCB/esp32-sensors-2
ESP32-S3 boards, one sensor each: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0

HeyPCB/esp32-sensors-2
ESP32-S3 boards, one sensor each: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0

HeyPCB/esp32-sensors-2
ESP32-S3 boards, one sensor each: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0

HeyPCB/esp32-sensors-2
ESP32-S3 boards, one sensor each: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0

HeyPCB/esp32-sensors-2
ESP32-S3 boards, one sensor each: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0

HeyPCB/esp32-sensors-2
ESP32-S3 boards, one sensor each: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0

HeyPCB/esp32-sensors-2
ESP32-S3 boards, one sensor each: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0

HeyPCB/whisker
Drop-in controller for Petoi's Nybble robot cat running the stock OpenCat firmware: ATmega328P, PCA9685, MPU-6050, USB-C, 3 A buck, protected battery input. 4-layer KiCad 10 board plus printed cradle.
bogdan-kovalchuk/esp32-lora-gps-tracker
Encrypted point-to-point GPS telemetry over 433 MHz LoRa between two ESP32 boards.

FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware

JoeMighty/opentouch-s3
A modern remake of the Bare Conductive Touch Board: 12 capacitive touch electrodes, MP3/WAV/MIDI audio, and now WiFi, Bluetooth LE, USB-C, a proper LiPo power path, a fuel gauge, line-in, MIDI out, Qwiic and an RGB LED.

HeyPCB/iris-brainstem
Iris Brainstem: power and servo hub of the Iris robot head. 9 V USB-C PD in, 6 V / 5 A servo rail in stitched copper zones (measured), 5 V rail, half-duplex servo bus with ten ports, speaker amp.
jonaschramm/race-tracker
Custom PCB data logger for motorcycle racing: GPS position + IMU motion data, logged to a microSD card, with an e-Paper status display. Built around an ESP32-S3 (WiFi/BT built in) so it can also stream/sync over WiFi.
Jotrorox/minicontrol
RP2354A + 868 MHz LoRa (Ai-Thinker Ra-01SH) USB-C controller board, designed in KiCad 10.

superfansizhe-beep/tscircuit-stm32f302-board
STM32F302R8T6 考核板 —— 用 tscircuit 以 TypeScript 描述原理图与 PCB,9 页分页、4 层板、含完整交付物
It measures 30 × 48 mm and has 4 copper layers, 1.6 mm thick.
27 parts, built around the ESP32-S3-WROOM-1-N16R8, MPR121QR2, AP2112K-3.3TRG1 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HeyPCB/esp32-sensors-2 repository on GitHub, at the commit this page was made from: the board is boards/mpr121/kicad/esp32_mpr121.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).