
DashShield
GryphonRacingFSAE/GRC22
Repository for all firmware and related software on our 2022-2024 car

Repository for all firmware and related software on our 2022-2024 car
RLM is an open-source printed circuit board by GryphonRacingFSAE, from the GryphonRacingFSAE/GRC22 repository on GitHub. It is a 2-layer board of 88.9 × 59.1 mm with 29 parts on 41 nets, routed with 182 tracks and 16 vias.
It is built around the NRF24L01. Its parts include 6 capacitors, 4 resistors, 2 ICs and 1 diode. It belongs with the ESP32 boards of this library.
Repository for all firmware and related software on Gryphon Racing's 2022-2024 car.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4_ISO14580_Pad | H1, H2, H3, H4 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | Conn_01x03 | Connector_Molex:Molex_Micro-Fit_3.0_43650-0315_1x03_P3.00mm_Vertical | CAN, Dash |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | MPU_CAL, SD_OFF |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | AP1117-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | BN-220 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | GPS |
| 1 | ESP32 | GRC:ESP32 | ESP32 |
| 1 | GY-521 | GRC:GY-521 | GY-521 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LOGO | GRC:GRCBanner | G*** |
| 1 | MCP2562-E-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | MicroSD Module | GRC:MicroSD-Module | MicroSD Module |
| 1 | NRF24L01 | GRC:NRF24L01 | NRF24L01 |
| 1 | Shielding | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | Shield |
| 1 | Termination | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | Term |

GryphonRacingFSAE/GRC22
Repository for all firmware and related software on our 2022-2024 car

NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover

DAlexis/caustic-lasertag-system
Caustic project is a full-featured indoor and outdoor lasertag system

CGrassin/biosignals
Board for the acquisition of bio-potentials (EMG, ECG, EEG, etc.).

microdynamics-robot-quadcopter/breeze_electronics_design
This project is created and managed by EDA softwares, which contains the breeze quadcopter's component library, footprint library, schematic, printed circuit boards, etc.




It measures 88.9 × 59.1 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the NRF24L01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GryphonRacingFSAE/GRC22 repository on GitHub, at the commit this page was made from: the board is Remote-Logging-Module/hardware/RLM.kicad_pcb and its schematic Dash/hardware/DashShield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask GryphonRacingFSAE before reusing the design.