
RLM
GryphonRacingFSAE/GRC22
Repository for all firmware and related software on our 2022-2024 car

Repository for all firmware and related software on our 2022-2024 car
DashShield is an open-source printed circuit board by GryphonRacingFSAE, from the GryphonRacingFSAE/GRC22 repository on GitHub. It is a 2-layer board with 112 parts on 111 nets.
It is built around the CAT24C256LI and PMEG3050EP. Its parts include 55 resistors, 22 capacitors, 9 transistors, 7 diodes and 6 ICs.
Repository for all firmware and related software on Gryphon Racing's 2022-2024 car.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 10k | Resistor_SMD:R_0603_1608Metric | R005, R007, R301, R303, R304, R306, R307, R309, R312, R315, R318, R321, R324, R502, R504, R506 +3 |
| 12 | 270 | Resistor_SMD:R_0603_1608Metric | R316, R317, R319, R320, R322, R323, R501, R503, R505, R507, R509, R511 |
| 9 | 100nF | Capacitor_SMD:C_0603_1608Metric | C009, C010, C101, C104, C105, C201, C204, C205, C401 |
| 9 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q301, Q302, Q303, Q501, Q502, Q503, Q504, Q505, Q506 |
| 6 | 1k | Resistor_SMD:R_0603_1608Metric | R002, R003, R004, R311, R314, R403 |
| 5 | 20k | Resistor_SMD:R_0603_1608Metric | R006, R008, R302, R305, R308 |
| 4 | 0 | Resistor_SMD:R_0603_1608Metric | R101, R102, R201, R202 |
| 4 | 22pF | Capacitor_SMD:C_0603_1608Metric | C102, C103, C202, C203 |
| 3 | 10nF | Capacitor_SMD:C_0603_1608Metric | C003, C004, C011 |
| 3 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C005, C007, C008 |
| 3 | PMEG3050 | Diode_SMD:D_SOD-128 | D001, D005, D006 |
| 2 | 120 | Resistor_SMD:R_0603_1608Metric | R104, R204 |
| 2 | 2.7V | Package_TO_SOT_SMD:SOT-23 | D003, D004 |
| 2 | 25F | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C001, C002 |
| 2 | 3k9 | Resistor_SMD:R_0603_1608Metric | R401, R402 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric | R13, R103 |
| 2 | 500 | Resistor_SMD:R_0603_1608Metric | R310, R313 |
| 2 | 8MHz | Crystal:Crystal_SMD_HC49-SD | Y101, Y201 |
| 2 | MCP2515-xST | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U101, U201 |
| 2 | MCP2562-E-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U102, U202 |
| 2 | Shielding Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP102, JP202 |
| 2 | Termination Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP101, JP201 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C006 |
| 1 | 3.3 | Resistor_SMD:R_0603_1608Metric | R001 |
| 1 | 5.1V | Diode_SMD:D_SMA | D002 |
| 1 | CAN0 | Connector_Molex:Molex_Micro-Fit_3.0_43650-0315_1x03_P3.00mm_Vertical | J101 |
| 1 | CAN1 | Connector_Molex:Molex_Micro-Fit_3.0_43650-0315_1x03_P3.00mm_Vertical | J202 |
| 1 | CAT24C256 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U401 |
| 1 | Dash LEDs | Connector_Molex:Molex_Micro-Fit_3.0_43045-0812_2x04_P3.00mm_Vertical | J3 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J601 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D007 |
| 1 | PWR | Connector_Molex:Molex_Micro-Fit_3.0_43650-0215_1x02_P3.00mm_Vertical | J001 |
| 1 | Steering Wheel | Connector_Molex:Molex_Micro-Fit_3.0_43045-1212_2x06_P3.00mm_Vertical | J301 |
| 1 | WP Enable Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | ~ | U3V40x:U3V40x | U001 |

GryphonRacingFSAE/GRC22
Repository for all firmware and related software on our 2022-2024 car


SpaceTeam/uHoubolt_PCB_LiIon_Charger
Small sized PCB (19mm x 20mm). Used to control and monitor the charging process of a connected LiIon Battery.


andreiii04/in-car-dashboard
Custom STM32 in-car telemetry display: G-meter, GPS speed and cabin weather on a 2.8" TFT, with each drive logged to SD.




112 parts, built around the CAT24C256LI and PMEG3050EP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GryphonRacingFSAE/GRC22 repository on GitHub, at the commit this page was made from: the board is Dash/hardware/DashShield.kicad_pcb and its schematic Dash/hardware/DashShield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask GryphonRacingFSAE before reusing the design.