Skip to the content
2 layers81.3 × 80 mmTelemetry board, the printed circuit board in 3D

This repo houses all the code the car needs to run, separated into steering wheel, telemetry, and CAN bus files.

Size
81.3 × 80 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
41
Pads
196
Tracks, vias
257, 1
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
11 Oct 2023
Updated
19 May 2024

Overview

Telemetry board is an open-source printed circuit board by Full-Blue-Racing, from the Full-Blue-Racing/FBR24-Electronics repository on GitHub. It is a 2-layer board of 81.3 × 80 mm with 29 parts on 41 nets, routed with 257 tracks and 1 via.

It is built around the DS1307+. Its parts include 13 connectors, 4 resistors, 3 ICs, 1 diode and 1 crystal. It belongs with the RP2040 boards of this library.

Main components

1

README

README.md

FBR24-Electronics

This repo houses all the code the car needs to run, separated into steering wheel, telemetry, and CAN bus files.

Git Gud

Git Crash Course

Gitlab SSH setup

Git can be separated into remote and local repository (repo), how it works is that you can clone a repo to your local machine, add files you would like git to track, commit your changes to your local branch, pull changes by others from the remote repo, and push your own local changes. Locally git can be separated into three areas:

Untracked files -> tracked files -> staging area

Untracked files are usually not part of the project and will not be added to the repo. Tracked files are project files, and files in here will have status shown (i.e. new file/changed/renamed...). The staging area is files that are ready to be committed, and tracked files needs to be added by git add.

These are the only commands I would recommend using on the command line/IDE, for more complex commands (such as creating pull requests for merging branches) use the web interface.

Image of Git Workflow

Best Practices

No spaces in file names or folder names please

No direct pushing/committing on the master branch

  1. Use branches

Each of the following tasks are on a separate branch, please work on the branch relevant to your task. If multiple people are on the same branch please make sub-branches from the main task branch

e.g.

text
steering-wheel -> steering-wheel-warninglights
               -> steering-wheel-RPM-lights

We will merge them into the main steering-wheel branch when you make a merge request to the task branch.

  1. Micro-commit

Commit every time you've implemented a feature - it allows easy rollback to previous version without too much code loss if things go wrong (and they WILL go wrong).

  1. Handy commands

git config --global user.name <display name> - sets your name on your commits to the repo

git clone <path/to/directory> - clones a local copy of the repo to your machine so you can make changes.

git pull origin <name of branch> - pulls any changes others have published on the remote branch of the said name since your last update/ initial clone

git add <file to be added> - adds file to the staging area to be included in the next commit.

git commit -m "Commit message here" - commits file to the local branch with the commit message - please make the commit message meaningful so it is easier to backtrack (Not Add new file)

git push origin <name of branch> - push your local commits to the remote repo on the named branch. Note that on the first push git may require you to set the upstream branch with git branch --set-upstream-to <name of head branch>

git remote update origin --prune - updates branches and removes merged branches on your local machine.

Tasks

Each function to be made are described in respective folders' README, please edit the README with your name if you are currently working on the task, and remove it if not. If someone is already working on one and you want to join, contact them and see if you can help before writing your own code. Otherwise just write your name down and contact me (Will) for any questions/purchasing.

Parts

29
QtyValueFootprintReferences
11Conn_01x06TelemetryBoard:JST_XA_B06B-XASK-1_1x06_P2.50mm_VerticalJ1, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12
44K7Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3, R4
2SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1, JP2
11N5817Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1
1Battery_CellTelemetryBoard:RSPRO_237-8341BT1
1Conn_01x02TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ13
1Conn_01x09TelemetryBoard:Adafruit_MicroSD_Breakout_4682J2
1CrystalCrystal:Crystal_Round_D1.0mm_VerticalY1
1DS1307+Package_DIP:DIP-8_W7.62mmU2
1LM7805_TO220Package_TO_SOT_THT:TO-220-3_Horizontal_TabDownU3
1PicoMCU_RaspberryPi_And_Boards:RPi_Pico_W_SMD_THU1

The 25 most common of 29 parts.

More from Full-Blue-Racing/FBR24-Electronics

4
  • 2 layers148.6 × 83.8 mmNew BSPD, the printed circuit board in 3D

    New BSPD

    Full-Blue-Racing/FBR24-Electronics

    This repo houses all the code the car needs to run, separated into steering wheel, telemetry, and CAN bus files.

    62 parts
  • 2 layers132.1 × 100.7 mmRelaybox indicator leds, the printed circuit board in 3D

    Relaybox indicator leds

    Full-Blue-Racing/FBR24-Electronics

    This repo houses all the code the car needs to run, separated into steering wheel, telemetry, and CAN bus files.

    57 parts
  • 2 layers129.5 × 87.9 mmCAN PCB, the printed circuit board in 3D

    CAN PCB

    Full-Blue-Racing/FBR24-Electronics

    This repo houses all the code the car needs to run, separated into steering wheel, telemetry, and CAN bus files.

    29 parts
  • 2 layers64.8 × 35.6 mmTelemetryCANBoard, the printed circuit board in 3D

    TelemetryCANBoard

    Full-Blue-Racing/FBR24-Electronics

    This repo houses all the code the car needs to run, separated into steering wheel, telemetry, and CAN bus files.

    16 parts

Similar boards

  • 2 layers271.8 × 114.3 mmArdumower mega shield svn, the printed circuit board in 3D

    Ardumower mega shield svn

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    426 parts282
  • 2 layers87 × 56 mmPiFA 8xy, the printed circuit board in 3D

    PiFA 8xy

    trihome/RasPi_PiFA

    IO interface board for Raspberry Pi "HAT".

    69 parts8CC-BY-SA-4.0
  • 2 layers68 × 86.9 mmNBoxRpi, the printed circuit board in 3D

    NBoxRpi

    trihome/RasPi_NervesBOX

    An extension platform for the Raspberry Pi that mimics the functionality of a PLC.

    95 parts5CC-BY-SA-4.0
  • 4 layers160 × 65 mmCapybara rocket, the printed circuit board in 3D

    Capybara rocket

    adam-kabbara/RSX-CANSAT-2026

    This is a repository design to manage the files made by the Aerial team under the Robotics for Space eXploration design team at the University of Toronto

    174 parts4
  • 2 layers203.2 × 135.9 mmPreamp, the printed circuit board in 3D

    Preamp

    oco2000/AVRForth

    Forth for AVR microcontrollers

    75 parts4GPL-3.0
  • 4 layers70 × 143 mmIoBoard, the printed circuit board in 3D

    IoBoard

    Loic74650/ioBoard

    A relay (and more!) board with Ethernet connectivity and MQTT support

    206 parts3GPL-3.0
  • 4 layersCanSat Sensor Board, the printed circuit board in 3D

    CanSat Sensor Board

    adam-kabbara/RSX-CANSAT-2025

    This is a repository design to manage the files made by the Cansat team under the Robotics for Space eXploration design team at the University of Toronto

    46 parts2

Questions

How big is the Telemetry board PCB?

It measures 81.3 × 80 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Telemetry board use?

29 parts, built around the DS1307+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Telemetry board KiCad files?

From the Full-Blue-Racing/FBR24-Electronics repository on GitHub, at the commit this page was made from: the board is Loom/Telemetry/telemetry_board.kicad_pcb and its schematic Loom/Brake System Plausability Device/BSPD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Telemetry board design in my own project?

Its repository states no licence, so its author keeps all rights: ask Full-Blue-Racing before reusing the design.