Skip to the content
2 layers64.8 × 35.6 mmTelemetryCANBoard, the printed circuit board in 3D

This repo houses all the code the car needs to run, separated into steering wheel, telemetry, and CAN bus files.

Size
64.8 × 35.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
25
Pads
58
Tracks, vias
55, 5
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
11 Oct 2023
Updated
19 May 2024

Overview

TelemetryCANBoard is an open-source printed circuit board by Full-Blue-Racing, from the Full-Blue-Racing/FBR24-Electronics repository on GitHub. It is a 2-layer board of 64.8 × 35.6 mm with 16 parts on 25 nets, routed with 55 tracks and 5 vias.

Its parts include 3 resistors, 3 connectors, 2 capacitors, 2 ICs and 1 crystal.

README

README.md

FBR24-Electronics

This repo houses all the code the car needs to run, separated into steering wheel, telemetry, and CAN bus files.

Git Gud

Git Crash Course

Gitlab SSH setup

Git can be separated into remote and local repository (repo), how it works is that you can clone a repo to your local machine, add files you would like git to track, commit your changes to your local branch, pull changes by others from the remote repo, and push your own local changes. Locally git can be separated into three areas:

Untracked files -> tracked files -> staging area

Untracked files are usually not part of the project and will not be added to the repo. Tracked files are project files, and files in here will have status shown (i.e. new file/changed/renamed...). The staging area is files that are ready to be committed, and tracked files needs to be added by git add.

These are the only commands I would recommend using on the command line/IDE, for more complex commands (such as creating pull requests for merging branches) use the web interface.

Image of Git Workflow

Best Practices

No spaces in file names or folder names please

No direct pushing/committing on the master branch

  1. Use branches

Each of the following tasks are on a separate branch, please work on the branch relevant to your task. If multiple people are on the same branch please make sub-branches from the main task branch

e.g.

text
steering-wheel -> steering-wheel-warninglights
               -> steering-wheel-RPM-lights

We will merge them into the main steering-wheel branch when you make a merge request to the task branch.

  1. Micro-commit

Commit every time you've implemented a feature - it allows easy rollback to previous version without too much code loss if things go wrong (and they WILL go wrong).

  1. Handy commands

git config --global user.name <display name> - sets your name on your commits to the repo

git clone <path/to/directory> - clones a local copy of the repo to your machine so you can make changes.

git pull origin <name of branch> - pulls any changes others have published on the remote branch of the said name since your last update/ initial clone

git add <file to be added> - adds file to the staging area to be included in the next commit.

git commit -m "Commit message here" - commits file to the local branch with the commit message - please make the commit message meaningful so it is easier to backtrack (Not Add new file)

git push origin <name of branch> - push your local commits to the remote repo on the named branch. Note that on the first push git may require you to set the upstream branch with git branch --set-upstream-to <name of head branch>

git remote update origin --prune - updates branches and removes merged branches on your local machine.

Tasks

Each function to be made are described in respective folders' README, please edit the README with your name if you are currently working on the task, and remove it if not. If someone is already working on one and you want to join, contact them and see if you can help before writing your own code. Otherwise just write your name down and contact me (Will) for any questions/purchasing.

Parts

16
QtyValueFootprintReferences
3MountingHole_3.2mm_M3MountingHole:MountingHole_3.2mm_M3MNT1, MNT3, MNT4
227pCapacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mmC1, C2
2Conn_01x06Connector_JST:JST_XA_B06B-XASK-1_1x06_P2.50mm_VerticalJ1, J2
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
1120Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3
116MCrystal:Crystal_HC49-U_VerticalY1
120kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1Conn_01x02CAN PCB Footprints:ATF13-2P-BM03J3
1LOGOAdditional Footprints:FBR_logo_for_PCBG***
1MCP2515-xSOPackage_DIP:DIP-18_W7.62mmU2
1MCP2551-I-PPackage_DIP:DIP-8_W7.62mmU1
1MountingHole_3.2mm_MMountingHole:MountingHole_3.2mm_M3MNT2

More from Full-Blue-Racing/FBR24-Electronics

4
  • 2 layers148.6 × 83.8 mmNew BSPD, the printed circuit board in 3D

    New BSPD

    Full-Blue-Racing/FBR24-Electronics

    This repo houses all the code the car needs to run, separated into steering wheel, telemetry, and CAN bus files.

    62 parts
  • 2 layers132.1 × 100.7 mmRelaybox indicator leds, the printed circuit board in 3D

    Relaybox indicator leds

    Full-Blue-Racing/FBR24-Electronics

    This repo houses all the code the car needs to run, separated into steering wheel, telemetry, and CAN bus files.

    57 parts
  • 2 layers129.5 × 87.9 mmCAN PCB, the printed circuit board in 3D

    CAN PCB

    Full-Blue-Racing/FBR24-Electronics

    This repo houses all the code the car needs to run, separated into steering wheel, telemetry, and CAN bus files.

    29 parts
  • 2 layers81.3 × 80 mmTelemetry board, the printed circuit board in 3D

    Telemetry board

    Full-Blue-Racing/FBR24-Electronics

    This repo houses all the code the car needs to run, separated into steering wheel, telemetry, and CAN bus files.

    29 parts

Similar boards

  • 2 layers140.5 × 30 mmType e, the printed circuit board in 3D

    Type e

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    16 parts3kApache-2.0
  • 2 layers41.4 × 14.5 mmU2f zero, the printed circuit board in 3D

    U2f zero

    conorpp/u2f-zero

    U2F USB token optimized for physical security, affordability, and style

    16 parts2.4k
  • 2 layers122 × 37 mmV0-UmbilicalBoard, the printed circuit board in 3D

    V0-UmbilicalBoard

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    16 parts1.1kGPL-3.0
  • 2 layers152 × 57.6 mmVideoslotadapter, the printed circuit board in 3D

    Videoslotadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    16 parts1kGPL-3.0
  • 2 layers36 × 63.4 mmSmart ringfinal layout, the printed circuit board in 3D

    Smart ringfinal layout

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    16 parts915
  • 2 layers60 × 40 mmHASwitchPlate, the printed circuit board in 3D

    HASwitchPlate

    aderusha/HASwitchPlate

    LCD touchscreen for Home Automation

    16 parts738MIT
  • 2 layers21.1 × 26.9 mmDemo, the printed circuit board in 3D

    Demo

    easyw/kicadStepUpMod

    kicadStepUp: ECAD to MCAD FreeCAD WorkBench

    16 parts704

Questions

How big is the TelemetryCANBoard PCB?

It measures 64.8 × 35.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TelemetryCANBoard use?

16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TelemetryCANBoard KiCad files?

From the Full-Blue-Racing/FBR24-Electronics repository on GitHub, at the commit this page was made from: the board is Loom/Telemetry/TelemetryCANBoard/TelemetryCANBoard.kicad_pcb and its schematic Loom/Brake System Plausability Device/BSPD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the TelemetryCANBoard design in my own project?

Its repository states no licence, so its author keeps all rights: ask Full-Blue-Racing before reusing the design.