
FriedSalmon2040
Fisheiyy/FriedSalmon2040
A, probably partially-functional, RP2040 based, 3D Printer Motherboard.

A RP2040 based 3D Printer Port Expander
Better Klipper Expander is an open-source printed circuit board by Fisheiyy, from the Fisheiyy/Better-Klipper-Expander repository on GitHub. It is a 4-layer board of 105 × 30 mm with 95 parts on 86 nets, routed with 589 tracks and 84 vias.
It is built around the RP2040, TPS5450DDAR and W25Q16JVUXIQ, with the XT1861B332MR-G, AO3400C and S1A among its other parts. Its parts include 25 resistors, 23 capacitors, 13 connectors, 11 diodes and 6 transistors. It belongs with the RP2040 boards of this library.
A RP2040 based 3D Printer Port Expander with 6 Fan Ports, Selectable Fan Voltage (24V/5V) (3 Fans per Voltage Selection Header), 2 Thermistor ports (1 with PT1000 Support), and a Positive Driven Fan Port (FAN5) for CPAP Fan Drivers.

You can contact me if you have any questions regarding this.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C4, C5, C11, C12, C13, C15, C18, C20, C21, C22, C23 |
| 6 | 10R | Resistor_SMD:R_0805_2012Metric | R8, R10, R12, R18, R20, R22 |
| 6 | 20K | Resistor_SMD:R_0805_2012Metric | R9, R11, R13, R19, R21, R23 |
| 6 | AO3400C | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 6 | S1A | Diode_SMD:D_SMA | D5, D6, D7, D8, D9, D10 |
| 5 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C9, C17 |
| 4 | 2.37K | Resistor_SMD:R_0805_2012Metric | R14, R15, R24, R25 |
| 3 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C10, C14, C16 |
| 3 | 4.7K | Resistor_SMD:R_0805_2012Metric | R16, R17, R26 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R2, R6 |
| 2 | 10pF | Capacitor_SMD:C_0603_1608Metric | C7, C8 |
| 2 | 22R | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | BAV99 | BAV99:DIO_BAV99 | D4, D11 |
| 2 | MountingHole | KlipperExpander:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 0.25A | Fuse:Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolder | F1 |
| 1 | 10uH | Fuse:Fuse_0805_2012Metric | L2 |
| 1 | 12MHz | Oscillator:Oscillator_SMD_SeikoEpson_SG8002CE-4Pin_3.2x2.5mm | Y1 |
| 1 | 15uH | Inductor_SMD:L_1210_3225Metric | L1 |
| 1 | 200R | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 20A | 01000063Z:01000063Z | F2 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 24V IN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1 |
| 1 | 3.24K | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 330uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C19 |
| 1 | 4A | Fuse:Fuse_0805_2012Metric | F3 |
| 1 | FAN0 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | FAN1 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | FAN2 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | FAN3 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | FAN4 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J8 |
| 1 | FAN5 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J9 |
| 1 | LOGO | TRA_KiCad_Footprints:VoronLogo_6pt5mm_silkScreen | G*** |
| 1 | LOGO | Open Source Hardware:Open Source Hardware 5mm | G*** |
| 1 | Neopixel | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12 |
| 1 | PT1000 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U4 |
| 1 | RUN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | S5BBF | Diode_SMD:D_SMB_Handsoldering | D2 |
| 1 | SS34 | Diode_SMD:D_SMA | D1 |
| 1 | SS54 | Diode_SMD:D_SMA | D3 |
| 1 | TH0 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | TH1 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J10 |
| 1 | TPS5450DDAR | TPS5450:VREG_LM5017MR_NOPB | U3 |
| 1 | TXS0101DBVR | TXS0101DBVR:SOT95P280X145-6N | U5 |
| 1 | USB4105-GF-A | ul_USB4105-GF-A:USB4105-GF-A | J2 |
| 1 | VFAN_SEL1 | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J11 |
| 1 | VFAN_SEL2 | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J13 |
| 1 | W25Q16JVUXIQ | W25Q16JVUXIQ:SON50P300X200X60-9N | U1 |
| 1 | XT1861B332MR-G | Package_TO_SOT_SMD:SOT-23 | U2 |

Fisheiyy/FriedSalmon2040
A, probably partially-functional, RP2040 based, 3D Printer Motherboard.

OpenTaxus/opentaxus
Opentaxus is a permissively licensed set of hardware, software, and tooling to help as a starting point for customized conference badges.

cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.



Ethansuttor/drone_PCB
An 80×80 mm STM32F405 flight controller for a 4S freestyle quad, running Betaflight off a custom target I wrote.


It measures 105 × 30 mm and has 4 copper layers, 1.6 mm thick.
95 parts, built around the RP2040, TPS5450DDAR, W25Q16JVUXIQ and XT1861B332MR-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Fisheiyy/Better-Klipper-Expander repository on GitHub, at the commit this page was made from: the board is better-klipper-expander.kicad_pcb and its schematic better-klipper-expander.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Fisheiyy before reusing the design.