

Haier Wash Robort
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 182
- Nets
- 263
- Pads
- 644
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 Sep 2024
- Updated
- 27 Oct 2024
Overview
Haier Wash Robort is an open-source printed circuit board by NekoPurrTech, from the NekoPurrTech/Haier_Wash_Robort repository on GitHub. It is a 2-layer board with 182 parts on 263 nets.
It is built around the IR2104SPBF, TPS5450DDAR and CSD87350Q5D, with the TB67H450FNG, A1001WR-S-2X08PD01 and IP2364 among its other parts. Its parts include 76 capacitors, 65 resistors, 17 ICs, 7 diodes and 7 connectors. It belongs with the STM32 boards of this library.
Main components
12IR2104SPBF
SOIC-8-40℃~+125℃ 100ns 10V~20V 130mA 150ns 150uA 2 270mA 3V 50ns 680ns 800mV Enable shutdown、Interleaved conduction protection、Dead-time control Half-Bridge IGBT、MOSFET SOIC-8 Gate Drivers ROHSInfineon TechnologiesGate DriversTPS5450DDAR
SOP-8-EP-150mil-40℃~+125℃@(TJ) 1 1.221V~31.32V 3mA 5.5V~36V 500kHz 5A Adjustable Buck Built-in No Overcurrent Protection、Cycle-by-cycle current limiting、Hiccup current limiting Step-down type SOP-8-EP-150mil DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersCSD87350Q5D
SON-8(5x6)1.69nF 12W 2 N-Channel 2.1V 26nC 3.835nF 30V 40A 6.8mΩ@4.5V 65pF Half-Bridge SON-8(5x6) MOSFETs ROHSTexas InstrumentsMOSFETsTB67H450FNG
SOP-8_EP_150milSOP-8-EP New Arrivals ROHSToshibaUncategorisedA1001WR-S-2X08PD01
SMD,P=1mm-25℃~+85℃ 16P 1A 1mm 2 2x8P 4.29mm 5.1mm 50V 8 Beige Gold PA6T Phosphor bronze Surface Mount, Right Angle UL94V-0 SMD,P=1mm Wire To Board Connector ROHSHRWire To Board ConnectorIP2364
ESOP-812.6V 14V~24V 3 3A Charging IC Lithium Battery Not supported Support ESOP-8 Battery Management ROHSINJOINICBattery ManagementSS54
SMA(DO-214AC)-55℃~+125℃ 1mA@40V 40V 550mV@5A 5A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes2.54-2P WT
SMD,P=2.5mm,卧贴-25℃~+85℃ 1 1x2P 2 2.5mm 250V 2P 3A Beige Brass LCP Surface Mount, Right Angle Tin UL94V-0 XH SMD,P=2.5mm,卧贴 Wire To Board Connector ROHSSHOU HANWire To Board ConnectorAO3400
SOT-23-55℃~+150℃ 1 N-channel 1.05nF 1.4V 1.5W 28mΩ@10V 30V 5.8A 77pF N-Channel SOT-23 MOSFETs ROHSGOODWORKMOSFETsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsDF13B-2P-1.25V(51)
SMD,P=1.25mm-35℃~+85℃ 1 1.25mm 1.25mm 150V 1A 1x2P 2 2P Brass Surface Mount,Vertical UL94V-0 SMD,P=1.25mm Wire To Board Connector ROHSHirose ElectricWire To Board ConnectorUK-2.0-2AWT
SMD,P=2mm,卧贴-25℃~+85℃ 1 10.35mm 100V 1x2P 2 2A 2P 2mm 5.2mm Brass LCP Surface Mount, Right Angle Tin UL94V-0 SMD,P=2mm,卧贴 Wire To Board Connector ROHSUSAKROWire To Board Connector
Parts
182| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C12, C14, C16, C22, C35, C36, C37, C38, C47, C48, C49 +18 |
| 19 | 1K | Resistor_SMD:R_0603_1608Metric | R25, R26, R27, R28, R37, R38, R39, R40, R41, R42, R43, R44, R45, R46, R52, R62 +3 |
| 11 | 22R | Resistor_SMD:R_0603_1608Metric | R5, R6, R7, R29, R30, R31, R32, R33, R34, R35, R36 |
| 10 | 1uF | Capacitor_SMD:C_0603_1608Metric | C13, C15, C43, C44, C45, C46, C64, C65, C68, C69 |
| 9 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R9, R13, R15, R16, R17, R18, R50, R56 |
| 7 | 100uF | SamacSys_Parts:CAPPM3528X210N | C39, C40, C41, C42, C57, C58, C59 |
| 7 | 10uF | Capacitor_SMD:C_0603_1608Metric | C18, C19, C20, C21, C32, C33, C34 |
| 5 | 10uF | Capacitor_SMD:C_1206_3216Metric | C26, C30, C31, C70, C71 |
| 4 | CSD87350Q5D | SamacSys_Parts:CSD87350Q5D | U3, U4, U5, U6 |
| 4 | IR2104SPBF | SamacSys_Parts:SOIC127P600X175-8N | IC3, IC4, IC5, IC6 |
| 3 | 1.5uH | Inductor_SMD:L_1210_3225Metric | L3, L4, L5 |
| 3 | 100R | Resistor_SMD:R_0603_1608Metric | R2, R4, R8 |
| 3 | 100mR | Resistor_SMD:R_1206_3216Metric | R47, R48, R49 |
| 3 | 15K | Resistor_SMD:R_0603_1608Metric | R20, R22, R24 |
| 3 | 1uF | Capacitor_SMD:C_1206_3216Metric | C23, C24, C25 |
| 3 | 220pF | Capacitor_SMD:C_0603_1608Metric | C27, C28, C29 |
| 3 | 68K | Resistor_SMD:R_0603_1608Metric | R19, R21, R23 |
| 3 | TB67H450FNG | SamacSys_Parts:SOIC127P600X175-9N | IC7, IC8, IC9 |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric | R53, R59 |
| 2 | 100uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C62, C76 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C10, C11 |
| 2 | 500R | Resistor_SMD:R_0603_1608Metric | R10, R12 |
| 2 | 5R1 | Resistor_SMD:R_0603_1608Metric | R54, R57 |
| 2 | 82K | Resistor_SMD:R_0603_1608Metric | R55, R61 |
| 2 | SS54 | SamacSys_Parts:DIOM5126X245N | D1, D5 |
| 1 | 0.01uF | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 0R | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 100pF | Capacitor_SMD:C_0603_1608Metric | C67 |
| 1 | 10uH | Inductor_SMD:L_Cenker_CKCS8060 | L6 |
| 1 | 15uH | Inductor_SMD:L_Cenker_CKCS8060 | L2 |
| 1 | 2.54-2P_WT | kicad_lceda:CONN-SMD_2.54-2PWT | CN1 |
| 1 | 2.6K | Resistor_SMD:R_0603_1608Metric | R51 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C60 |
| 1 | 3.16K | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 3.3V_MCU | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | 3.3V_Sensor | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | 3.3V_WirelessModule | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | 510K | Resistor_SMD:R_0603_1608Metric | R58 |
| 1 | 51K | Resistor_SMD:R_0603_1608Metric | R60 |
| 1 | 5V | LED_SMD:LED_0603_1608Metric | D6 |
| 1 | A1001WR-S-2X08PD01 | kicad_lceda:CONN-SMD_A1001WR-S-2X08PD01 | U8 |
| 1 | AO3400 | SamacSys_Parts:SOT95P280X125-3N | Q1 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | BOOT0 | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | CSTCE16M00G55-R0 | SamacSys_Parts:CSTCE12M0G55-R0 | R3 |
| 1 | Charge | LED_SMD:LED_0603_1608Metric | D7 |
| 1 | DF13B-2P-1.25V(51) | kicad_lceda:CONN-TH_2P-P1.25_HRS_DF13B-2P-1.25V-51 | CN2 |
| 1 | EA3036QBR | SamacSys_Parts:QFN40P300X300X80-21N | IC1 |
| 1 | Header_6 | kicad_lceda:CONN-SMD-6P-1.5 | P1 |
| 1 | IMU_Heater | SamacSys_Parts:IMU_Heater | R11 |
| 1 | IP2364 | kicad_lceda:ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP-3 | U7 |
| 1 | RST | SamacSys_Parts:B3U-1000P | S1 |
| 1 | SMD1.25-6P | kicad_lceda:SMD-1.25-6P | J8 |
| 1 | SMD1.25-8P | kicad_lceda:SMD-1.25-8P | J9 |
| 1 | STM32F407VETx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | TPS5450DDAR | SamacSys_Parts:SOIC127P600X170-9N | IC2 |
| 1 | UK-2.0-2AWT | kicad_lceda:CONN-SMD_2P-P2.00_USAKRO_UK-2.0-2AWT | CN3 |
| 1 | UK-2.0-4AWT | kicad_lceda:CONN-SMD_4P-P2.00_USAKRO_UK-2.0-4AWT | CN4 |
| 1 | ~ | SamacSys_Parts:ICM20602 | U2 |
More from NekoPurrTech/Haier_Wash_Robort
1- 2 layers27 × 27 mm

Similar boards
- 4 layers65 × 45 mm

- 2 layers79 × 80 mm

- 2 layers21.6 × 20.5 mm

High Side MOSFET Driver(Power Switch)
JaiSuriyan161004/KiCAD-High-Side-MOSFET-Driver-Power-Switch-
A discrete power electronics hardware layout and component validation project implementing a logic-level triggered, high-side power switching architecture for high-current DC loads, featuring strict front/back…
15 parts - 2 layers64.9 × 47.3 mm

Universal battery charger
ArthorH/PD-UniCharger
Universal power delivery charger with battery reverse polarity protection
64 partsCERN-OHL-P-2.0 - 4 layers105 × 30 mm

Better Klipper Expander
Fisheiyy/Better-Klipper-Expander
A RP2040 based 3D Printer Port Expander
95 parts14 - 2 layers50 × 50 mm

- 4 layers170.2 × 79 mm

- 4 layers55 × 55 mm

Drone PCB FC
Ethansuttor/drone_PCB
An 80×80 mm STM32F405 flight controller for a 4S freestyle quad, running Betaflight off a custom target I wrote.
90 parts
Questions
What parts does the Haier Wash Robort use?
182 parts, built around the IR2104SPBF, TPS5450DDAR, CSD87350Q5D and TB67H450FNG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Haier Wash Robort KiCad files?
From the NekoPurrTech/Haier_Wash_Robort repository on GitHub, at the commit this page was made from: the board is Hardware/Hardware.kicad_pcb and its schematic Hardware/Brush_Motor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Haier Wash Robort design in my own project?
Its repository states no licence, so its author keeps all rights: ask NekoPurrTech before reusing the design.