

TMC2209 TestBoard
- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 89
- Pads
- 246
- Tracks, vias
- 398, 24
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 Aug 2023
- Updated
- 17 Sep 2023
Overview
TMC2209 TestBoard is an open-source printed circuit board by NekoPurrTech, from the NekoPurrTech/TMC2209_TestBoard repository on GitHub. It is a 2-layer board of 50 × 50 mm with 59 parts on 89 nets, routed with 398 tracks and 24 vias.
It is built around the CH340C, TPS5450DDAR and AMS1117-3.3, with the B3U-1000P, SS54 and CSTCE8M00G55-R0 among its other parts. Its parts include 19 capacitors, 18 resistors, 8 connectors, 4 ICs and 4 diodes. It belongs with the STM32 boards of this library.
Main components
7CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersTPS5450DDAR
SOP-8-EP-150mil-40℃~+125℃@(TJ) 1 1.221V~31.32V 3mA 5.5V~36V 500kHz 5A Adjustable Buck Built-in No Overcurrent Protection、Cycle-by-cycle current limiting、Hiccup current limiting Step-down type SOP-8-EP-150mil DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsB3U-1000P
SMD,3x2.5mm-25℃~+70℃ 1.53N 1.6mm 12V 2.5mm 3mm 50mA Round Button SMD(SMT) Tab SPST Surface Mount,Vertical SMD,3x2.5mm Tactile Switches ROHSOmronTactile SwitchesSS54
SMA(DO-214AC)-55℃~+125℃ 1mA@40V 40V 550mV@5A 5A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesCSTCE8M00G55-R0
SMD3213-3P-20℃~+80℃ 33pF 8MHz SMD3213-3P Ceramic Resonators ROHSMurataCeramic ResonatorsXKB8585-Z-190
插件-15℃~+55℃ 1.6N 100,000 cycles 100mA 30V Latching PC Pin Square Button Through Hole White Without 插件 Pushbutton Switches ROHSXKB ConnectionPushbutton Switches
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C7, C8, C9 |
| 7 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R4, R5, R6, R7, R8, R14 |
| 5 | 22R | Resistor_SMD:R_0603_1608Metric | R3, R12, R13, R17, R18 |
| 5 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C10, C11, C13, C14, C15 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C16, C17, C18, C19 |
| 4 | 5K1 | Resistor_SMD:R_0603_1608Metric | R10, R11, R15, R16 |
| 3 | B3U-1000P | SamacSys_Parts:B3U-1000P | S1, S2, S3 |
| 2 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J2 |
| 2 | Power_LED | LED_SMD:LED_0603_1608Metric | D1, D4 |
| 2 | SS54 | SamacSys_Parts:DIOM5126X245N | D2, D3 |
| 2 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J5, J6 |
| 1 | 15uH | Inductor_SMD:L_Bourns-SRN4018 | L1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 3.16K | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 470uF | Capacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-I | C12 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | CSTCE8M00G55-R0 | SamacSys_Parts:CSTCE12M0G55-R0 | R2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x02_Pin | Connector_AMASS:AMASS_XT30UPB-M_1x02_P5.0mm_Vertical | J7 |
| 1 | Conn_01x04_Socket | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04_Socket | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J8 |
| 1 | LOGO | Userlib:Logo_Meng | G*** |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | TPS5450DDAR | SamacSys_Parts:SOIC127P600X170-9N | IC1 |
| 1 | XKB8585-Z-190 | Userlib:SW-TH_6P-L8.6-W8.6-P2.50-LS5.4 | SW1 |
Similar boards
- 4 layers170.2 × 79 mm

- 4 layers105 × 30 mm

Better Klipper Expander
Fisheiyy/Better-Klipper-Expander
A RP2040 based 3D Printer Port Expander
95 parts14 - 4 layers55 × 55 mm

Drone PCB FC
Ethansuttor/drone_PCB
An 80×80 mm STM32F405 flight controller for a 4S freestyle quad, running Betaflight off a custom target I wrote.
90 parts - 2 layers

- 2 layers100 × 100 mm

- 2 layers40 × 111 mm

- 2 layers46 × 62 mm

- 2 layers87.1 × 58.5 mm

Panel
ConfusedHello/STorM32-NT
A fork of the STorM32 NT controller board for my own purposes.
217 parts
Questions
How big is the TMC2209 TestBoard PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TMC2209 TestBoard use?
59 parts, built around the CH340C, TPS5450DDAR, AMS1117-3.3 and B3U-1000P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TMC2209 TestBoard KiCad files?
From the NekoPurrTech/TMC2209_TestBoard repository on GitHub, at the commit this page was made from: the board is Hardware/TMC2209_TestBoard.kicad_pcb and its schematic Hardware/TMC2209_TestBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TMC2209 TestBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask NekoPurrTech before reusing the design.