

USDX mOnO PA
Power Amplifier for uSDX Mono
- Size
- 99.5 × 36.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 32
- Pads
- 141
- Tracks, vias
- 1,067, 382
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 11 Mar 2022
- Updated
- 8 Apr 2022
Overview
USDX mOnO PA is an open-source printed circuit board by F4HTB, from the F4HTB/uSDX-mOnO-PA repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 99.5 × 36.5 mm with 58 parts on 32 nets, routed with 1,067 tracks and 382 vias.
It is built around the L7805CDT-TR, DTC114EE and LL4148, with the 2SC1969 among its other parts. Its parts include 20 capacitors, 10 resistors, 8 inductors, 5 connectors and 4 diodes. It belongs with the audio and music boards of this library.
Main components
4L7805CDT-TR
DPAK0℃~+125℃@(Tj) 1 1.5A 2V@(1A) 35V 5V 68dB@(120Hz) 6mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive DPAK Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsDTC114EE
SC-75(SOT-416)-55℃~+150℃ 1 1 NPN (Pre-Biased) 1.2V 100mA 100nA 10kΩ 2.5V@10mA,0.3V 200mV 200mW 250mV 35 50V NPN SC-75(SOT-416) Digital Transistors ROHSonsemiDigital TransistorsLL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching Diodes2SC1969
TO-2201 NPN 100uA 10~180 20W 25V 5V 6A NPN Standalone TO-220 Bipolar (BJT) ROHSSPTECHBipolar Transistors - BJT
README
README.mduSDX-mOnO-PA
Power Amplifier for uSDX Mono.
This is a alpha version of 10m power amplifier for uSDX mOnO.
It will take place in the last layer of the uSDX mOnO.
Note that it is currently in testing.
I keep making things better.
Currently ~10w @ 28mhz with harmonics below 46dbc.
The simulation folder contains an LTspice equivalent.
Please read the notes in the diagram.








Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C5, C8, C13, C18, C19 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580 | H1, H2, H3, H4 |
| 3 | 220p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C16, C17 |
| 2 | 1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 2 | 100p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C11 |
| 2 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8 |
| 2 | 300 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R1, R3 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J3 |
| 2 | DTC114EE | Custom:DTC114EE | Q2, Q3 |
| 2 | IM01 | Relay_SMD:Relay_DPDT_AXICOM_IMSeries_JLeg | K1, K2 |
| 2 | LL4148 | Diode_SMD:D_MiniMELF | D2, D3 |
| 2 | T50-6 8tr | Custom:FT37-XX | L4, L5 |
| 2 | TRANSF1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | L1, L2 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 10u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C7 |
| 1 | 18 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R2 |
| 1 | 1N4007 | Diode_SMD:D_MiniMELF_Handsoldering | D1 |
| 1 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 200p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 1 | 27 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 2SC1969 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q1 |
| 1 | 39p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 1 | 420 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 470uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C20 |
| 1 | 500 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | RV1 |
| 1 | 75p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | Conn_01x02 | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J5 |
| 1 | Conn_01x02 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | J4 |
| 1 | FT37-43 20tr | Custom:FT37-XX | L6 |
| 1 | L7805CDT-TR | Package_TO_SOT_SMD:TO-252-2 | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | T37-6 6tr | Custom:FT37-XX | L8 |
| 1 | T37-6 9tr | Custom:FT37-XX | L7 |
| 1 | VK200 (bobinée entièrement) | Inductor_THT:L_Radial_D6.0mm_P4.00mm | L3 |
Similar boards
- 2 layers140 × 90 mm

- 2 layers140 × 90 mm

- 4 layers100 × 50 mm

- 2 layers228.6 × 100 mm

Mongus48
ChrisChrisLoLo/beyblock20
The magnetic, modular, 20-key macropad that can join together to form an ortholinear board
124 parts335GPL-3.0 - 2 layers80 × 129.1 mm

Smart Plant
JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…
75 parts303 - 4 layers137 × 86 mm

- 4 layers38.4 × 128.5 mm

- 2 layers275 × 200 mm

Questions
How big is the USDX mOnO PA PCB?
It measures 99.5 × 36.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the USDX mOnO PA use?
58 parts, built around the L7805CDT-TR, DTC114EE, LL4148 and 2SC1969. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USDX mOnO PA KiCad files?
From the F4HTB/uSDX-mOnO-PA repository on GitHub, at the commit this page was made from: the board is usdx_mono_PA/usdx_mono_PA.kicad_pcb and its schematic usdx_mono_PA/usdx_mono_PA.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the USDX mOnO PA design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).