Skip to the content
PCBKitNew board
DTC114EE, in 3D

DTC114EE

onsemi

-55℃~+150℃ 1 1 NPN (Pre-Biased) 1.2V 100mA 100nA 10kΩ 2.5V@10mA,0.3V 200mV 200mW 250mV 35 50V NPN SC-75(SOT-416) Digital Transistors ROHS

Extended
DatasheetJLCPCBLCSConsemi/DTC114EE
Category
Digital Transistors
Package
SC-75(SOT-416)
Pins
3

Overview

The DTC114EE is a digital Transistor made by onsemi in a SC-75(SOT-416) package with 3 pins. -55℃~+150℃ 1 1 NPN (Pre-Biased) 1.2V 100mA 100nA 10kΩ 2.5V@10mA,0.3V 200mV 200mW 250mV 35 50V NPN SC-75(SOT-416) Digital Transistors ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Pro:DTC114EET1G, from EasyEDA Pro) and its footprint (Package_TO_SOT_SMD:SOT-416, from KiCad's library), ready for a KiCad board. 2,584 are in stock at JLCPCB (part C94400). 1 open-source board in 1 repository on GitHub use it.

Symbol

C3B1E2
EasyEDA_Pro:DTC114EET1GFrom EasyEDA Pro

Footprint

123
Package_TO_SOT_SMD:SOT-416From KiCad's library

From the datasheet

6
Collector-emitter, most
50 V · Collector−Emitter Voltage, absolute max · p. 1
Collector current, most
100 mA · Continuous collector current, max at TA = 25°C · p. 1
Junction, hottest
150 °C · Junction temperature, max · p. 3
Junction to air (SC−75)
600 K/W · Junction to ambient, max; FR−4 minimum pad · p. 3
Junction to air (SC−75)
400 K/W · Junction to ambient, max; FR−4 1.0 x 1.0 Inch Pad · p. 3
Current gain, least
35 · DC current gain, min; IC = 5.0 mA, VCE = 10 V · p. 4

What it is and has

2
Device type
Digital transistor with bias resistor network · p. 1
Bias resistors
R1 = 10 kW, R2 = 10 kW · p. 1

Specifications

25
ParameterConditionsAs printedPage
Collector−Base Voltage VCBOTA = 25°Cmax 50 Vdc1
Collector−Emitter Voltage VCEOTA = 25°Cmax 50 Vdc1
Collector Current − Continuous ICTA = 25°Cmax 100 mAdc1
Input Forward Voltage VIN(fwd)TA = 25°Cmax 40 Vdc1
Input Reverse Voltage VIN(rev)TA = 25°Cmax 10 Vdc1
Total Device Dissipation PDSC−75, DTC114EE; TA = 25°C; Note 1: FR−4 @ Minimum Pad.max 200 mW3
Total Device Dissipation PDSC−75, DTC114EE; TA = 25°C; Note 2: FR−4 @ 1.0 x 1.0 Inch Pad.max 300 mW3
Derate above 25°C PDSC−75, DTC114EE; Note 1: FR−4 @ Minimum Pad.max 1.6 mW/°C3
Derate above 25°C PDSC−75, DTC114EE; Note 2: FR−4 @ 1.0 x 1.0 Inch Pad.max 2.4 mW/°C3
Thermal Resistance, Junction to Ambient RqJASC−75, DTC114EE; Note 1: FR−4 @ Minimum Pad.max 600 °C/W3
Thermal Resistance, Junction to Ambient RqJASC−75, DTC114EE; Note 2: FR−4 @ 1.0 x 1.0 Inch Pad.max 400 °C/W3
Junction and Storage Temperature Range TJ, TstgSC−75, DTC114EEmin -55 · max 150 °C3
Collector−Base Cutoff Current ICBOTA = 25°C; VCB = 50 V, IE = 0max 100 nAdc4
Collector−Emitter Cutoff Current ICEOTA = 25°C; VCE = 50 V, IB = 0max 500 nAdc4
Emitter−Base Cutoff Current IEBOTA = 25°C; VEB = 6.0 V, IC = 0max 0.5 mAdc4
Collector−Base Breakdown Voltage V(BR)CBOTA = 25°C; IC = 10 mA, IE = 0min 50 Vdc4
Collector−Emitter Breakdown Voltage (Note 5) V(BR)CEOTA = 25°C; IC = 2.0 mA, IB = 0; pulsed, Pulse Width = 300 msec, Duty Cycle ≤ 2%min 50 Vdc4
DC Current Gain (Note 5) hFETA = 25°C; IC = 5.0 mA, VCE = 10 V; pulsed, Pulse Width = 300 msec, Duty Cycle ≤ 2%min 35 · typ 604
Collector−Emitter Saturation Voltage (Note 5) VCE(sat)TA = 25°C; IC = 10 mA, IB = 0.3 mA; pulsed, Pulse Width = 300 msec, Duty Cycle ≤ 2%max 0.25 Vdc4
Input Voltage (off) Vi(off)TA = 25°C; VCE = 5.0 V, IC = 100 mAtyp 1.2 · max 0.8 Vdc4
Input Voltage (on) Vi(on)TA = 25°C; VCE = 0.3 V, IC = 10 mAmin 2.5 · typ 1.8 Vdc4
Output Voltage (on) VOLTA = 25°C; VCC = 5.0 V, VB = 2.5 V, RL = 1.0 kWmax 0.2 Vdc4
Output Voltage (off) VOHTA = 25°C; VCC = 5.0 V, VB = 0.5 V, RL = 1.0 kWmin 4.9 Vdc4
Input Resistor R1TA = 25°Cmin 7 · typ 10 · max 13 kW4
Resistor Ratio R1/R2TA = 25°Cmin 0.8 · typ 1 · max 1.24

Pins, by the datasheet

3
1 BASE
Input through the series base resistor R1. · p. 1
2 EMITTER
Ground. · p. 1
3 COLLECTOR
Collector output. · p. 1

Ordering codes, by the datasheet

2
DTC114EET1G
SC−75 · Pb−Free; 3000 / Tape & Reel · p. 2
SDTC114EET1G
SC−75 · S prefix for automotive and other applications requiring unique site and control change requirements; AEC−Q101 qualified and PPAP capable; Pb−Free; 3000 / Tape & Reel · p. 2

Parameters

19
Collector - Emitter Voltage VCEO
50V
Collector Current (Ic)
100mA
Current - Collector Cutoff
100nA
Current - Collector(Ic)
100mA
DC Current Gain
35
Input Resistor
10kΩ
Input Voltage (VI(on)@Ic,Vce)
2.5V@10mA,0.3V
Junction Temperature(Max)
150℃
Number
1 NPN (Pre-Biased)
Operating Temperature
-55℃~+150℃
Output Voltage(VO(on))
200mV
Pd - Power Dissipation
200mW
Power - Max
200mW
Resistor Ratio
1
Thermal Resistance(Junction to Ambient)
600℃/W
Transistor Type
NPN - Pre-Biased
Vce Saturation(VCE(sat))
250mV
Voltage - Input(Max)(VI(off))
1.2V
type
NPN

Order codes

1

Pinout

3
The pins of the DTC114EE
PinNameType
1BUnspecified
2EUnspecified
3CUnspecified

Open-source boards using it

All 1
  • 2 layers99.5 × 36.5 mmUSDX mOnO PA, the printed circuit board in 3D

    USDX mOnO PA

    F4HTB/uSDX-mOnO-PA

    Power Amplifier for uSDX Mono

    58 parts6GPL-3.0

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/onsemi/DTC114EE" title="DTC114EE in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/onsemi/DTC114EE.jpg" alt="DTC114EE" width="1200" height="900">
A picture that opens the part, for a README
[![DTC114EE](https://pcbkit.io/embed/parts/onsemi/DTC114EE.jpg?size=s)](https://pcbkit.io/parts/onsemi/DTC114EE)

Questions

Is there a KiCad symbol and footprint for the DTC114EE?

Yes. The symbol is EasyEDA_Pro:DTC114EET1G and the footprint Package_TO_SOT_SMD:SOT-416, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DTC114EE?

SC-75(SOT-416), with 3 pins. Its footprint is drawn on this page.

Where is the DTC114EE datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the DTC114EE?

JLCPCB lists it as part C94400, with 2,584 in stock; the sellers' links on this page open their listings.

What can replace the DTC114EE?

Parts like it in the library: the DTC143EE by onsemi, the DTC144EE by onsemi, the DTC143ZE by onsemi and the DTC114YE by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DTC114EE?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8