Skip to the content
2 layers66 × 53.3 mmUmich balloons power, the printed circuit board in 3D

Umich balloons power

EricAndrechek/umich-balloons

An open-source, modular, Arduino-based tracking system (designed for use on high-altitude weather balloons) with LoRa, APRS, Iridium RockBLOCKs, and cellular data transmission capabilities to a mapping server, ground stations, and vehicle trackers.

Size
66 × 53.3 mm
Copper layers
2
Thickness
1.69 mm
Parts
28
Nets
53
Pads
184
Tracks, vias
279, 58
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
18 Feb 2025
Updated
20 Jun 2026

Overview

Umich balloons power is an open-source printed circuit board by EricAndrechek, from the EricAndrechek/umich-balloons repository on GitHub. It is a 2-layer board of 66 × 53.3 mm with 28 parts on 53 nets, routed with 279 tracks and 58 vias.

It is built around the TPS63070RNM. Its parts include 9 capacitors, 7 connectors, 5 resistors, 2 ICs and 1 inductor.

Main components

1

Parts

28
QtyValueFootprintReferences
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
310uFCapacitor_SMD:C_0805_2012MetricC3, C9, C10
322uFCapacitor_SMD:C_0805_2012MetricC5, C6, C7
210kResistor_SMD:R_0603_1608MetricR1, R2
2Conn_01x09Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalJ4, J5
10.1uCapacitor_SMD:C_0805_2012MetricC2
10.1uFCapacitor_SMD:C_0603_1608MetricC1
11.5uHInductor_SMD:L_Coilcraft_XxL4020L1
1100kResistor_SMD:R_0603_1608MetricR5
110uFCapacitor_SMD:C_0603_1608MetricC4
1150kResistor_SMD:R_0603_1608MetricR3
1470kResistor_SMD:R_0603_1608MetricR4
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1Conn_01x02Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_HorizontalJ7
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ6
1Conn_01x10Connector_Molex:Molex_PicoBlade_53047-1010_1x10_P1.25mm_VerticalJ3
1Conn_02x20_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ2
1MCP23008-xSOPackage_SO:SOIC-18W_7.5x11.6mm_P1.27mmU2
1tps63070balloon:VQFN-HR-15U1

More from EricAndrechek/umich-balloons

4
  • 2 layers66 × 53.3 mmUmich balloons aprs, the printed circuit board in 3D

    Umich balloons aprs

    EricAndrechek/umich-balloons

    An open-source, modular, Arduino-based tracking system (designed for use on high-altitude weather balloons) with LoRa, APRS, Iridium RockBLOCKs, and cellular data transmission capabilities to a mapping server, ground…

    15 parts
  • 2 layers50.3 × 17.8 mmUmich balloons external, the printed circuit board in 3D

    Umich balloons external

    EricAndrechek/umich-balloons

    An open-source, modular, Arduino-based tracking system (designed for use on high-altitude weather balloons) with LoRa, APRS, Iridium RockBLOCKs, and cellular data transmission capabilities to a mapping server, ground…

    8 parts
  • 2 layers66 × 53.3 mmUmich balloons processor, the printed circuit board in 3D

    Umich balloons processor

    EricAndrechek/umich-balloons

    An open-source, modular, Arduino-based tracking system (designed for use on high-altitude weather balloons) with LoRa, APRS, Iridium RockBLOCKs, and cellular data transmission capabilities to a mapping server, ground…

    8 parts
  • 2 layers66 × 53.3 mmUmich balloons gps, the printed circuit board in 3D

    Umich balloons gps

    EricAndrechek/umich-balloons

    An open-source, modular, Arduino-based tracking system (designed for use on high-altitude weather balloons) with LoRa, APRS, Iridium RockBLOCKs, and cellular data transmission capabilities to a mapping server, ground…

    7 parts

Similar boards

  • 4 layers30 × 23.5 mmNIMRS-21Pin Decoder, the printed circuit board in 3D

    NIMRS-21Pin Decoder

    CDFER/NIMRS-21Pin-Decoder

    An open source 21-Pin DCC Decoder for model trains

    89 parts21
  • 2 layersSupplyBoard, the printed circuit board in 3D

    SupplyBoard

    LaboratorioGluon/Icaro

    Proyecto para Globo Estratosférico Ícaro con ESP32

    6 parts15
  • 2 layers67 × 45 mmMarvin PS, the printed circuit board in 3D

    Marvin PS

    lhm0/marvin_robot

    robot model controlled by ESP32

    20 parts2
  • 2 layers43.6 × 25.5 mmBikeUSBv2, the printed circuit board in 3D

    BikeUSBv2

    H3wastooshort/BikeUSBv2

    Charge your Phone off of your Bike while adapting charging power to available power / riding speed.

    63 parts1GPL-3.0
  • 2 layers94 × 94 mmMotorboard, the printed circuit board in 3D

    Motorboard

    icl-rocketry/payload_gimbal

    the ReAL payload

    72 parts1MIT
  • 4 layers60 × 60 mmBatteryBoard lipo, the printed circuit board in 3D

    BatteryBoard lipo

    takuhoTech/LagopusSystem-2024

    Avionics for Human-Powered Aircraft (Japan International Birdman Rally 2024)

    80 parts1MIT
  • 2 layers44.3 × 46.3 mmCatear pcb, the printed circuit board in 3D

    Catear pcb

    TobleMiner/catear-pcb

    This repo contains the PCB for the Nekomimi project of @BenBE . It will be used to illuminate 3D printed catears.

    121 parts1

Questions

How big is the Umich balloons power PCB?

It measures 66 × 53.3 mm and has 2 copper layers, 1.69 mm thick.

What parts does the Umich balloons power use?

28 parts, built around the TPS63070RNM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Umich balloons power KiCad files?

From the EricAndrechek/umich-balloons repository on GitHub, at the commit this page was made from: the board is balloon-tracker/hardware/umich_balloons_power/umich_balloons_power.kicad_pcb and its schematic balloon-tracker/hardware/umich_balloons_aprs/umich_balloons_aprs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Umich balloons power design in my own project?

Its repository states no licence, so its author keeps all rights: ask EricAndrechek before reusing the design.