2 layers120.1 × 120 mm
Mono amplifier
dario0603/AB-class-amplifier
Design and simulation of a Class-AB audio power amplifier, focusing on output-stage linearity, crossover distortion reduction, and overcurrent protection.
97 parts1
2 layers116.5 × 47.5 mm
Proj3 potencia
Edson8101/EA801---Turma-DEste repositório apresenta os projetos desenvolvidos pelos estudantes da FEEC-UNICAMP na disciplina de graduação denominada Laboratório de Sistemas Embarcados.
- Size
- 116.5 × 47.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 32
- Pads
- 76
- Tracks, vias
- 70, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Apr 2025
- Updated
- 30 Jun 2025
Overview
Proj3 potencia is an open-source printed circuit board by Edson8101, from the Edson8101/EA801---Turma-D repository on GitHub, published under the MIT licence. It is a 2-layer board of 116.5 × 47.5 mm with 27 parts on 32 nets, routed with 70 tracks and 0 vias.
It is built around the BC337, 100SP1T1B4M2QE and BD139, with the BD140 and IRF540N among its other parts. Its parts include 10 resistors, 5 transistors, 4 connectors, 3 diodes and 2 capacitors.
Main components
5
BC337
TO-92-31 NPN 100 100MHz 100nA 45V 5V 625mW 700mV 800mA NPN TO-92-3 Bipolar (BJT) ROHSFoshan Blue Rocket ElecBipolar (BJT)
100SP1T1B4M2QE
插件-35℃~+85℃ 12.7mm 28V 50,000 cycles 5A 6.86mm PC Pin Round Column SPDT Through Hole Plugin Slide Switches ROHSE-SwitchSlide Switches
BD139
TO-126-65℃~+150℃ 1 NPN 1.5A 10uA 12.5W 500mV 5V 63 80V NPN TO-126 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)BD140
TO-126-65℃~+150℃ 1 PNP 1.25W 1.5A 100nA 500mV 5V 63 80V PNP TO-126 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)
IRF540N
TO-2201 N-channel 1.35nF 100V 130W 280pF 33A 35mΩ@10V 4V 52nC@10V 85pF N-Channel TO-220 MOSFETs ROHSOSENMOSFETs
README
README.mdEA801
Este repositório apresenta os projetos desenvolvidos pelos estudantes da FEEC-UNICAMP na disciplina de graduação denominada Laboratório de Sistemas Embarcados.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | R | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R2, R3, R4, R5, R6, R7 |
| 3 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1, J2, J3 |
| 2 | 10u | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1, C2 |
| 2 | BC337 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | D | Diode_THT:D_5W_P10.16mm_Horizontal | D1, D3 |
| 1 | 10 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R11 |
| 1 | 100SP1T1B4M2QE | Chave_Denison:SW_100SP1T1B4M2QE | S1 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R8 |
| 1 | 3 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R10 |
| 1 | 4N25 | Package_DIP:DIP-6_W7.62mm | U3 |
| 1 | BD139 | Package_TO_SOT_THT:TO-126-3_Vertical | Q3 |
| 1 | BD140 | Package_TO_SOT_THT:TO-126-3_Vertical | Q4 |
| 1 | Conector IDC | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J5 |
| 1 | IRF540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q6 |
| 1 | L | Inductor_THT:L_Toroid_Vertical_L26.7mm_W14.0mm_P10.16mm_Pulse_D | L2 |
| 1 | LED | LED_THT:LED_D3.0mm | D2 |
Similar boards
- 2 layers100 × 100 mm
- 2 layers84.5 × 82.6 mm
- 2 layers40 × 99 mm
- 2 layers135.8 × 56.1 mm
Power board
xtarke/automated_buggy
This shield connects microcontroller (MSP-EXP430FR2355) pins to the car's power board. Go to Power Board for more hardware information.
87 parts5GPL-3.0 - 2 layers101.3 × 102.4 mm
Opamp front
prydin/opamp-frontend-class-ab
The result is a fast amplifier (>80V/us slew rate) with low distortion (0.00045% meadured @ 1kHz/1W/8ohm resistive load). It's undergone some preliminary measurements and looks quite promising.
93 parts4 - 4 layers150.3 × 132.3 mm
- 2 layers111.1 × 44.5 mm
1KVA Power Supply
Ogbonna-Joseph/1KVA-SINE-WAVE-POWER-INVERTER
This is a design of a sine wave power inverter, which can be used in your homes and offices.
33 parts1
Questions
How big is the Proj3 potencia PCB?
It measures 116.5 × 47.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Proj3 potencia use?
27 parts, built around the BC337, 100SP1T1B4M2QE, BD139 and BD140. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Proj3 potencia KiCad files?
From the Edson8101/EA801---Turma-D repository on GitHub, at the commit this page was made from: the board is Projeto 03/Projeto3_Barbara_Glauco/Projeto_Boost/proj3_potencia.kicad_pcb and its schematic Projeto 03/Projeto3_Barbara_Glauco/Projeto_Boost/proj3_potencia.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Proj3 potencia design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).