Skip to the content
4 layers42.9 × 42.7 mmRexP1-Wheel, the printed circuit board in 3D

Drive wheel for my RexP1 Astro Droid Project based on a RP2040Zero board

Size
42.9 × 42.7 mm
Copper layers
4
Thickness
1.6 mm
Parts
15
Nets
32
Pads
83
Tracks, vias
165, 1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
14 Jul 2025
Updated
6 Jun 2026

Overview

RexP1-Wheel is an open-source printed circuit board by DrJonEA, from the DrJonEA/RexP1-Drive-Wheel repository on GitHub, published under the MIT licence. It is a 4-layer board of 42.9 × 42.7 mm with 15 parts on 32 nets, routed with 165 tracks and 1 via.

It is built around the RP2040-ZERO. Its parts include 2 connectors, 1 capacitor, 1 resistor and 1 switch. It belongs with the RP2040 boards of this library.

Main components

1

README

README.md

RexP1-Drive-Wheel

isolated Drive wheel for my RexP1 Astro Droid Project based on a RP2040Zero board. This Repo repreents the drive wheel subsystem for RexP1.

Checkout the videos guides to the project over on my YouTube Channel DrJonEA.

RexP1 Intro

RexP1 is a reimagined Star War's inspired Astro Droid based on the R series Droids. It is based on Raspberry PI 5, RP2040 and RP2350 boards. It's control system is a distributed net based on ROS2 and MicroROS frameworks.

All my work on RexP1 is available to my sponsors. That includes not just this submodule but all the submodules, the build instructions, PCB designs, STL files, CAD designs and most important acess to me to ask questions. Take a look at the sponsorship button on the github repo.

The Repo

This repo includes the PCB design for the drive wheels and assoicated documentation. It also includes the firmware for a RP2040Zero which acts as a ROS2 Node to control the Wheel and some other sensors.

Libraries

Note libraries have not been included as submodules in this repo. That is because I wanted just a single copy of the libraries in the master repo for RexP1. So take note of the lib documentation.

Build process

The firmware should build like most complex Pico SDK firmware projects. Normal procedure:

text
mkdir build
cd build
cmake ..
make

If you have ninja use that instead of make for Windows. Just make sure you update the CMakelists.txt to point to your libraries and that the environment variable PICO_SDK_PATH is defined to point to the SDK.

Parts

15
QtyValueFootprintReferences
6Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalHCSR04-1, HCSR04-2, HCSR04-3, L298N1, WS2812B-1, WS2812B-2
1220RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
1470uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC1
1Conn_01x04_SocketConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalADT1
1Conn_01x06_PinConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalMotor1
1RP2040-ZeroRP2040-Zero-Kicad:RP2040-ZeroRZ1
1SPARKFUN_LOGIC_LEVEL_CONVERTERSparkFunBoards:SPARKFUN_LOGIC_LEVEL_CONVERTERB1
1SW_SPSTButton_Switch_THT:SW_PUSH_6mm_H8.5mmSW1
1Screw_Terminal_01x03SparkFunConnectors:SCREWTERMINAL-5MM-3J2
1Uart0Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3

Similar boards

  • 2 layers132.3 × 94.9 mmCheapino, the printed circuit board in 3D

    Cheapino

    tompi/cheapino

    An affordable split 36 keys keyboard

    59 parts1.2kCC-BY-4.0
  • 2 layers321 × 92.3 mmMx40, the printed circuit board in 3D

    Mx40

    zzeneg/stront

    Split keyboards with 38 or 40 keys, LCD display and Cirque trackpad

    181 parts353MIT
  • 2 layers255.9 × 99.3 mmZerosprey42, the printed circuit board in 3D

    Zerosprey42

    beekeeb/zerosprey42

    Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.

    96 parts140
  • 2 layers146.3 × 69.5 mmStress, the printed circuit board in 3D

    Stress

    GroooveBob/Stress

    Pocket Arcade Fight Pad

    22 parts102MIT
  • 2 layers54 × 64 mmDonConIOmini, the printed circuit board in 3D

    DonConIOmini

    ravinrabbid/DonCon2040

    RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers

    96 parts66MIT
  • 2 layers52 × 50 mmRP2040-TestPatternGenerator VGA, the printed circuit board in 3D

    RP2040-TestPatternGenerator VGA

    nmur/RP2040-TestPatternGenerator

    A simple test pattern generator running on the RP2040 microcontroller

    12 parts64GPL-3.0
  • 2 layers120 × 40 mmBuinchiez40, the printed circuit board in 3D

    Buinchiez40

    ChrisChrisLoLo/bunchiez40

    A pocket keyboard that makes use of mouse switches to achieve a miniscule size

    90 parts56GPL-3.0
  • 2 layers305.2 × 76.2 mmSoroka, the printed circuit board in 3D

    Soroka

    kapee1/soroka

    40% DIY-keyboard with base kit support

    126 parts47Unlicense

Questions

How big is the RexP1-Wheel PCB?

It measures 42.9 × 42.7 mm and has 4 copper layers, 1.6 mm thick.

What parts does the RexP1-Wheel use?

15 parts, built around the RP2040-ZERO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RexP1-Wheel KiCad files?

From the DrJonEA/RexP1-Drive-Wheel repository on GitHub, at the commit this page was made from: the board is pcb/RexP1-Wheel/RexP1-Wheel.kicad_pcb and its schematic pcb/RexP1-Wheel/RexP1-Wheel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RexP1-Wheel design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).