
Mbus master
roarfred/AmsToMqttBridge
Minimalistic system to read AMS/HAN data from electrical meter

KiCad definition for the BrewBoard
BrewBoard2 is an open-source printed circuit board by DirkGasser, from the DirkGasser/BrewBoard repository on GitHub. It is a 2-layer board with 29 parts on 65 nets, routed with 293 tracks and 0 vias.
It is built around the BC337. Its parts include 6 connectors, 5 diodes, 2 capacitors, 2 resistors and 2 transistors.
Kicad Definition of the BrewBoard, the board which is connected to the raspberry pi and control the home brew factory
Board is designed with three wire bridges, so that a single sided board is sufficient. That way the board can be built home made.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Diode | RasperryLib:Diode | D1, D2, D3, D4, D5 |
| 2 | 10k | RasperryLib:Resistor | 10k1, R1 |
| 2 | 1k | RasperryLib:Resistor | R2, R3 |
| 2 | BC337 | RasperryLib:BC337 | Q1, Q2 |
| 2 | Conn_01x03 | RasperryLib:Connector1x3 | J4, J5 |
| 2 | Fuse | RasperryLib:Fuse | F1, F2 |
| 2 | Wire | RasperryLib:Wire_Short | W2, W3 |
| 1 | 100nF | RasperryLib:Capacitor_Small | C2 |
| 1 | 100nf | RasperryLib:Capacitor_Small | C1 |
| 1 | Buzzer_2 | RasperryLib:Buzzer1x2 | Bu1 |
| 1 | Conn_01x02 | RasperryLib:Conn_Small1x2 | J2 |
| 1 | Conn_01x03 | RasperryLib:Conn_Small1x3 | J1 |
| 1 | J8Header | RasperryLib:RaspiConnector | J3 |
| 1 | J8HeaderTurned | RasperryLib:RaspiConnectorTurned | J81 |
| 1 | L298 | RasperryLib:L298 | L1 |
| 1 | Relais | RasperryLib:Relais | RL1 |
| 1 | Trafo12V | RasperryLib:Trafo | TR2 |
| 1 | Trafo5V | RasperryLib:Trafo | TR1 |
| 1 | Wire | RasperryLib:Wire_long | W1 |

roarfred/AmsToMqttBridge
Minimalistic system to read AMS/HAN data from electrical meter



leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora

lampmerchant/tashtwenty
An interface for the DCD protocol used by Apple's Hard Disk 20.

CTXz/Video-Glitch-Array
A collection of glitch art circuits dedicated to VGA signal manipulation

29 parts, built around the BC337. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DirkGasser/BrewBoard repository on GitHub, at the commit this page was made from: the board is BrewBoard2/BrewBoard2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask DirkGasser before reusing the design.