

Plc io module
- Size
- 92.5 × 86.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 145
- Nets
- 132
- Pads
- 471
- Tracks, vias
- 707, 250
- Pours
- 46
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 Nov 2024
- Updated
- 5 Nov 2024
Overview
Plc io module is an open-source printed circuit board by DawiX123PL, from the DawiX123PL/POLSL-Mgr-PLC-IOmodule-Schematics repository on GitHub. It is a 4-layer board of 92.5 × 86.4 mm with 145 parts on 132 nets, routed with 707 tracks and 250 vias.
It is built around the MC34063AD, ISO6741DW and TLV73333PDBV, with the BCP5516TA and BCP5116TA among its other parts. Its parts include 73 resistors, 24 capacitors, 24 transistors, 5 connectors and 4 ICs. It belongs with the STM32 boards of this library.
Main components
5MC34063AD
SOIC-80℃~+70℃@(TA) 1 1.25V~40V 1.5A 100kHz 3V~40V Adjustable Boost、Buck Buck、Boost Built-in No SOIC-8 DC-DC Converters ROHSonsemiDC-DC ConvertersISO6741DW
SOIC-16-300mil-40℃~+125℃ 1 1.71V~5.5V 1.71V~5.5V 11ns 150kV/us 3 5000 50Mbps Fail-safe output High Level SOIC-16-300mil Digital Isolators ROHSTexas InstrumentsDigital IsolatorsTLV73333PDBV
SOT-23-5-40℃~+125℃@(Tj) 1 125mV@(300mA) 28uVrms 3.3V 300mA 34uA 5.5V 50dB@(1kHz) Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBCP5516TA
SOT-223-65℃~+150℃ 1 NPN 10 150MHz 1A 20uA 2W 500mV 5V 60V NPN SOT-223 Bipolar (BJT) ROHSDiodes IncorporatedBipolar (BJT)BCP5116TA
SOT-223-65℃~+150℃ 1 PNP 150MHz 1A 20uA 25 2W 45V 500mV 5V PNP SOT-223 Bipolar (BJT) ROHSDiodes IncorporatedBipolar (BJT)
Parts
145| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R13, R58, R59, R60, R61, R62, R63, R64, R65, R66, R67, R68, R69, R70, R71 +2 |
| 16 | 100k | Resistor_SMD:R_0805_2012Metric | R16, R18, R20, R22, R24, R26, R28, R30, R32, R34, R36, R38, R40, R42, R44, R46 |
| 16 | 500R | Resistor_SMD:R_0805_2012Metric | R5, R6, R7, R8, R9, R10, R11, R12, R31, R33, R35, R37, R39, R41, R43, R45 |
| 16 | BCP5516T | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q17, Q18, Q19, Q20, Q21, Q22, Q23, Q24 |
| 9 | 62k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14, R50, R51, R52, R53, R54, R55, R56, R57 |
| 8 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C5, C6, C7, C12, C16 |
| 8 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C17, C18, C19, C20, C21, C22, C23, C24 |
| 8 | 5k | Resistor_SMD:R_0805_2012Metric | R15, R17, R19, R21, R23, R25, R27, R29 |
| 8 | BCP5116TA | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16 |
| 4 | 10nF 25V | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9, C10, C14, C15 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H1, H2, H3, H4 |
| 4 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 3 | 300R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R47, R48, R49 |
| 2 | Conn_02x14_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x14_P2.54mm_Vertical_SMD | J1, J5 |
| 1 | 0.33R | Resistor_SMD:R_1812_4532Metric_Pad1.30x3.40mm_HandSolder | R4 |
| 1 | 1.0uH | Inductor_SMD:L_TDK_VLS6045EX_VLS6045AF | L2 |
| 1 | 1.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 100uF 16V | Capacitor_SMD:CP_Elec_6.3x7.7 | C8 |
| 1 | 100uF 25V | Capacitor_SMD:CP_Elec_6.3x7.7 | C13 |
| 1 | 1N5819 | Diode_SMD:Nexperia_CFP3_SOD-123W | D1 |
| 1 | 220uH | Inductor_SMD:L_12x12mm_H6mm | L1 |
| 1 | 3.6k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 470pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | 470uF 16V | Capacitor_SMD:CP_Elec_10x10 | C11 |
| 1 | 8MHz | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | Conn_02x03_Odd_Even | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J2 |
| 1 | ISO6741 | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U1 |
| 1 | LED_GREEN | LED_THT:LED_Rectangular_W5.0mm_H2.0mm | D2 |
| 1 | LED_Orange | LED_THT:LED_Rectangular_W5.0mm_H2.0mm | D3 |
| 1 | LED_RED | LED_THT:LED_Rectangular_W5.0mm_H2.0mm | D4 |
| 1 | MC34063AD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | STM32F030C6Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type073_RT02602HBLU_1x02_P5.08mm_Horizontal | J3 |
| 1 | Screw_Terminal_01x10 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-10-5.08_1x10_P5.08mm_Horizontal | J4 |
| 1 | TLV73333PDBV | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U4 |
Similar boards
- 2 layers99.6 × 100 mm

- 4 layers114.7 × 57.4 mm

Power Stage
bbassett6/HighEfficiencyInverter
documentation and files for the high efficiency inverter senior design project
175 parts - 2 layers50 × 56 mm

- 2 layers160 × 68 mm

- 2 layers45 × 45 mm

- 2 layers44 × 44 mm

- 2 layers100 × 68 mm

- 4 layers70 × 70 mm

1.Electronics
I-M-Robotics-Lab/STM32-Quadcopter
Quadcopter design based on STM32F411CEU Blackpill flight controller. Compatible with INAV 6.0 firmware.
57 parts80GPL-3.0
Questions
How big is the Plc io module PCB?
It measures 92.5 × 86.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Plc io module use?
145 parts, built around the MC34063AD, ISO6741DW, TLV73333PDBV and BCP5516TA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Plc io module KiCad files?
From the DawiX123PL/POLSL-Mgr-PLC-IOmodule-Schematics repository on GitHub, at the commit this page was made from: the board is plc_io_module.kicad_pcb and its schematic connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Plc io module design in my own project?
Its repository states no licence, so its author keeps all rights: ask DawiX123PL before reusing the design.