2 layers33 × 67.3 mm
2 layers99.6 × 100 mm
IsolatorPanel
SG-O/Isolator3Tripple Isolator for two Step/Dir/En and one UART signal
- Size
- 99.6 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 125
- Nets
- 46
- Pads
- 392
- Tracks, vias
- 477, 162
- Pours
- 36
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Sep 2020
- Updated
- 26 Oct 2020
Overview
IsolatorPanel is an open-source printed circuit board by SG-O, from the SG-O/Isolator repository on GitHub, published under the MIT licence. It is a 2-layer board of 99.6 × 100 mm with 125 parts on 46 nets, routed with 477 tracks and 162 vias.
It is built around the ISO6741DW and ISO6721BD. Its parts include 42 resistors, 36 capacitors, 18 connectors and 9 ICs. It belongs with the interfaces and adapters boards of this library.
Main components
2
ISO6741DW
SOIC-16-300mil-40℃~+125℃ 1 1.71V~5.5V 1.71V~5.5V 11ns 150kV/us 3 5000 50Mbps Fail-safe output High Level SOIC-16-300mil Digital Isolators ROHSTexas InstrumentsDigital Isolators
ISO6721BD
SOIC-8-40℃~+125℃ 1 1 11ns 150kV/us 3000 50Mbps High Level SOIC-8 Digital Isolators ROHSTexas InstrumentsDigital Isolators
Parts
125| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 0R | Resistor_SMD:R_0603_1608Metric | R3, R10, R10, R10, R11, R11, R11, R12, R12, R12, R13, R13, R13, R14, R14, R14 +14 |
| 18 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C2, C2, C3, C3, C3, C6, C6, C6, C7, C10, C10, C10, C11, C11, C11 +2 |
| 18 | 10u | Resistor_SMD:R_1206_3216Metric | C1, C1, C1, C4, C4, C4, C5, C5, C5, C8, C8, C8, C9, C12, C12, C12 +2 |
| 12 | MountingHole:MountingHole_2.5mm | , , , , , , , , , , , | |
| 12 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1, R1, R1, R2, R2, R2, R7, R7, R7, R8, R8, R8 |
| 6 | ISO6741 | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U1, U1, U1, U2, U2, U2 |
| 4 | Fiducial:Fiducial_1mm_Dia_2mm_Outer | , , , | |
| 4 | Fiducial:Fiducial_0.5mm_Dia_1mm_Outer | , , , | |
| 3 | ISO6721 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U3, U3 |
| 3 | Step_0_In | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J1, J1, J1 |
| 3 | Step_0_Out | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2, J2, J2 |
| 3 | Step_1_In | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3, J3, J3 |
| 3 | Step_1_Out | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J4, J4, J4 |
| 3 | UART_In | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J5, J5, J5 |
| 3 | UART_Out | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6, J6, J6 |
More from SG-O/Isolator
1Similar boards
- 4 layers90 × 70 mm
- 4 layers114.7 × 57.4 mm
Power Stage
bbassett6/HighEfficiencyInverter
documentation and files for the high efficiency inverter senior design project
175 parts - 4 layers92.5 × 86.4 mm
- 2 layers50 × 56 mm
- 2 layers160 × 68 mm
- 2 layers45 × 45 mm
- 2 layers133.9 × 76.2 mm
- 2 layers139.1 × 107.7 mm
Lotus58 Glow 130
TweetyDaBird/Lotus-58-Classic
A split ergo linear keyboard derived from the Lily58 family
125 parts390
Questions
How big is the IsolatorPanel PCB?
It measures 99.6 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IsolatorPanel use?
125 parts, built around the ISO6741DW and ISO6721BD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IsolatorPanel KiCad files?
From the SG-O/Isolator repository on GitHub, at the commit this page was made from: the board is IsolatorPanel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the IsolatorPanel design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).