Skip to the content
2 layers103.9 × 119.3 mmPrototype test, the printed circuit board in 3D

A hex-based modular system to build custom nerf gun targets

Size
103.9 × 119.3 mm
Copper layers
2
Thickness
1 mm
Parts
69
Nets
59
Pads
211
Tracks, vias
356, 43
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
6 Apr 2024
Updated
21 Jun 2024

Overview

Prototype test is an open-source printed circuit board by DIaLOGIKa-GmbH, from the DIaLOGIKa-GmbH/modular-nerf-target repository on GitHub, published under the MIT licence. It is a 2-layer board of 103.9 × 119.3 mm with 69 parts on 59 nets, routed with 356 tracks and 43 vias.

It is built around the RP2040, W25Q128JVSIQ and M24C02-WMN6, with the X322512MSB4SI among its other parts. Its parts include 21 capacitors, 13 resistors, 13 connectors, 9 diodes and 4 ICs. It belongs with the RP2040 boards of this library.

Main components

4

README

README.md

Nodular Nerf Target

A hex-based modular system to build custom nerf gun targets

Parts

69
QtyValueFootprintReferences
13100nCapacitor_SMD:C_0402_1005MetricC2, C3, C4, C5, C6, C7, C8, C9, C10, C12, C13, C18, C20
12SolderPad#TimGollLib:solder_pad_1.2x2.5mmJ1, J2, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13
6220Resistor_SMD:R_0402_1005MetricR2, R3, R5, R6, R9, R10
42u2Capacitor_SMD:C_0603_1608MetricC1, C11, C17, C21
3120Resistor_SMD:R_0402_1005MetricR4, R8, R11
3blueLED_SMD:LED_0603_1608MetricD3, D6, D9
3greenLED_SMD:LED_0603_1608MetricD2, D5, D8
3redLED_SMD:LED_0603_1608MetricD1, D4, D7
3testTestPoint:TestPoint_Pad_D1.5mmTP2, TP3, TP4
230pCapacitor_SMD:C_0402_1005MetricC14, C15
24k7Resistor_SMD:R_0603_1608MetricR12, R13
2testpoint#TimGollLib:tie-hookTP1, TP5
1100kPotentiometer_THT:Potentiometer_Bourns_3296Y_VerticalRV2
110kResistor_SMD:R_0603_1608MetricR1
110uCapacitor_SMD:C_0805_2012MetricC16
12k2Resistor_SMD:R_0805_2012MetricR7
1?uCapacitor_SMD:C_0805_2012MetricC19
1CortexDebug10#TimGollLib:FTSH-105-01-F-DV-KJ3
1Goertek B4013AM422-42#TimGollLib:B4013AM422-42MK1
1LMC6482AIMX/NOPBPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU4
1M24C02-WMNPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU5
1RP2040Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mmU2
1W25Q128JVSPackage_SO:SOIC-8_5.275x5.275mm_P1.27mmU1
1X322512MSB4SICrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1resetButton_Switch_SMD:SW_SPST_TL3342SW1

More from DIaLOGIKa-GmbH/modular-nerf-target

3
  • 2 layers223.8 × 240.4 mmNerf target v1 panel, the printed circuit board in 3D

    Nerf target v1 panel

    DIaLOGIKa-GmbH/modular-nerf-target

    A hex-based modular system to build custom nerf gun targets

    346 parts1MIT
  • 2 layers103.9 × 119.3 mmNerf target v1, the printed circuit board in 3D

    Nerf target v1

    DIaLOGIKa-GmbH/modular-nerf-target

    A hex-based modular system to build custom nerf gun targets

    65 parts1MIT
  • 2 layers35.6 × 22.9 mmAmplifier test, the printed circuit board in 3D

    Amplifier test

    DIaLOGIKa-GmbH/modular-nerf-target

    A hex-based modular system to build custom nerf gun targets

    10 parts1MIT

Similar boards

  • 4 layers80 × 99 mmSpool, the printed circuit board in 3D

    Spool

    TheCacophonyProject/spool-pcb

    161 partsCERN-OHL-W-2.0
  • 6 layers73 × 75.5 mmTc2-main pcb, the printed circuit board in 3D

    Tc2-main pcb

    TheCacophonyProject/thermal-camera-v2

    tc2-panel.py uses KiKit to build the manufacturing panel from the individual board files.

    219 partsCERN-OHL-W-2.0
  • 2 layersBias controller, the printed circuit board in 3D

    Bias controller

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    203 parts205
  • 4 layers72.6 × 170 mmOpenJBOD RP2040, the printed circuit board in 3D

    OpenJBOD RP2040

    OpenJBOD/rp2040

    This repository contains the hardware design files OpenJBOD RP2040 Baseboard.

    129 parts87CERN-OHL-P-2.0
  • 2 layers65 × 45 mmBetaBoard, the printed circuit board in 3D

    BetaBoard

    timbk/BetaBoard

    A simple and low cost particle detector for teaching

    132 parts85BSD-2-Clause
  • 4 layers142 × 119.7 mmQMTech MiSTeX, the printed circuit board in 3D

    QMTech MiSTeX

    MiSTeX-devel/MiSTeX-hardware

    Hardware for MiSTeX

    247 parts73
  • 2 layers51 × 30.9 mmGba cart, the printed circuit board in 3D

    Gba cart

    Daft-Freak/pico-gba-cart

    RP2040 emulating a GBA cartridge

    40 parts16
  • 2 layers75 × 55 mmWellfed bench, the printed circuit board in 3D

    Wellfed bench

    Isaac-Duarte/wellfed

    Open firmware that runs the PETLIBRO Granary PLAF103 pet feeder on your own Wi-Fi: no cloud, no account. Early and in testing.

    93 parts8MIT

Questions

How big is the Prototype test PCB?

It measures 103.9 × 119.3 mm and has 2 copper layers, 1 mm thick.

What parts does the Prototype test use?

69 parts, built around the RP2040, W25Q128JVSIQ, M24C02-WMN6 and X322512MSB4SI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Prototype test KiCad files?

From the DIaLOGIKa-GmbH/modular-nerf-target repository on GitHub, at the commit this page was made from: the board is electronics/prototype-test/prototype-test.kicad_pcb and its schematic electronics/amplifier-sim/amplifier-sim.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Prototype test design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).