Skip to the content
2 layers45.7 × 31.8 mmDuck, the printed circuit board in 3D

A little fidget toy that lets you click a keyboard switch and plays a noise.

Size
45.7 × 31.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
45
Nets
67
Pads
212
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 10.0 (file 20260206)
Created
3 May 2026
Updated
25 Jul 2026

Overview

Duck is an open-source printed circuit board by CubeShifter, from the CubeShifter/Duck repository on GitHub, published under the MIT licence. It is a 2-layer board of 45.7 × 31.8 mm with 45 parts on 67 nets.

It is built around the RP2040, W25Q128JVSIQ and SK6812MINI-E. Its parts include 21 capacitors, 11 resistors, 5 ICs, 3 connectors and 2 diodes. It belongs with the RP2040 boards of this library.

Main components

3

README

README.md

Duck

An rp2040 devboard that can be coded up to play a loud noise when pressed with a keyboard switch. The original goal for the project was to make it play a loud noise of your choice when you press the switch, but i wanted to make it more customizable so now its a pcb that you can do whatever with. sadly i did privitize my lapse links cause i put some pii in them so you will just have to trust my :hs:

Screenies!

Schematic Screenshot 2026-07-24 at 8 37 37 PM

I foget what its called(Dont mind the drc errors i forgot to rerun it) Screenshot 2026-07-24 at 8 38 18 PM

3d Model of top: Screenshot 2026-07-24 at 8 39 08 PM

3d model of bottom:

Screenshot 2026-07-24 at 8 39 43 PM

Steps for recreation:

Get the pcb fabricated, and solder on the componenets. I would highly reccomend PCBA, but you could also hand solder it. Once you build it, you can flash code on it like an rp2040 devboard. I want to see how people use the key and audio, so you should try using it somehow!

Parts

45
QtyValueFootprintReferences
110.1uFCapacitor_SMD:C_0402_1005MetricC1, C2, C3, C4, C5, C6, C7, C8, C10, C11, C18
210uFCapacitor_SMD:C_0201_0603MetricC19, C20
210ufCapacitor_SMD:C_0603_1608MetricC13, C14
21kResistor_SMD:R_0402_1005MetricR5, R6
21uFCapacitor_SMD:C_0402_1005MetricC9, C12
227Resistor_SMD:R_0402_1005MetricR1, R2
233pFCapacitor_SMD:C_0402_1005MetricC15, C16
25.1kResistor_SMD:R_0402_1005MetricR3, R4
10.1ufCapacitor_SMD:C_0402_1005MetricC17
11000kResistor_SMD:R_0402_1005MetricR9
1100kResistor_SMD:R_0402_1005MetricR8
110kResistor_SMD:R_0402_1005MetricR7
110ufCapacitor_SMD:C_0201_0603MetricC21
12kResistor_SMD:R_0402_1005MetricR11
1330Resistor_SMD:R_0402_1005MetricR10
1Conn_01x02Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ1
1Conn_02x01Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ3
1Crystal_GND24easyeda2kicad:CRYSTAL-SMD_4P-L3.2-W2.5-BLY1
1DDiode_SMD:D_0402_1005MetricD3
1MAX98357APackage_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mmU2
1MCP73831-2-OTPackage_TO_SOT_SMD:SOT-23-5U4
1NCP1117-3.3_SOT223Package_TO_SOT_SMD:SOT-223-3_TabPin2U5
1RP2040Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mmU1
1SK6812MINI-ELED_SMD:LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMountD1
1SW_Pusheasyeda2kicad:SW-SMD_L3.9-W3.0-P4.45SW1
1SW_Pushmarbastlib-mx:SW_MX_HS_CPG151101S11_1uSW2
1USB_C_Receptacle_USB2.0_14Peasyeda2kicad:USB-C_SMD-TYPE-C-31-M-12_1J2
1W25Q128JVSPackage_SO:SOIC-8_5.3x5.3mm_P1.27mmU3

More from CubeShifter/Duck

1
  • 4 layers30.7 × 30.5 mmDuck, the printed circuit board in 3D

    Duck

    CubeShifter/Duck

    A little fidget toy that lets you click a keyboard switch and plays a noise.

    50 partsMIT

Similar boards

  • 4 layers180.8 × 300.3 mmDilemma, the printed circuit board in 3D

    Dilemma

    Bastardkb/Dilemma

    The Dilemma is a vertical stagger low-profile keyboard with mods.

    383 parts590
  • 2 layers232.3 × 84.8 mmQazikat, the printed circuit board in 3D

    Qazikat

    weteor/Qazikat

    qaz-like keyboard with offset space, arrow cluster and ISO-enter

    236 parts88CERN-OHL-P-2.0
  • 2 layers291.8 × 134.6 mmMegaXE keyboard, the printed circuit board in 3D

    MegaXE keyboard

    bleroy/3d-junkyard

    Random 3D models

    359 parts69
  • 2 layers84.2 × 100 mmFabpack out v5 8, the printed circuit board in 3D

    Fabpack out v5 8

    yuz207/agentpad13

    agentpad13 — open-source 13-key macropad for agentic work (RP2040, vial-qmk, planar joystick, Raw HID agent-status protocol)

    126 parts41
  • 2 layers151.8 × 78.3 mmMinigeki, the printed circuit board in 3D

    Minigeki

    defvs/minigeki

    A portable implementation of an ONGEKI controller, with all necessary buttons, two macros, RGB LED support, USB-C.

    68 parts22GPL-3.0
  • 6 layers90 × 90 mmCodex micro wired revA route nognd, the printed circuit board in 3D

    Codex micro wired revA route nognd

    slopus/codex-keybored

    A 100% vibe-coded hardware build: Fusion 360, six-layer KiCad PCB, STM32 firmware, and live JLC factory handoff.

    97 parts10
  • 2 layers255.8 × 122.5 mmSplitfox, the printed circuit board in 3D

    Splitfox

    speedypotato/SplitFox-Pro

    Split-style Pro Leverless Controller

    143 parts6
  • 2 layers368 × 104 mmTbKB, the printed circuit board in 3D

    TbKB

    BigTuna94/RP2.65-F

    RP2.65-F Mechanical Keyboard - a 65% Ortholinear Keyboard with Faders

    331 parts4MIT

Questions

How big is the Duck PCB?

It measures 45.7 × 31.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Duck use?

45 parts, built around the RP2040, W25Q128JVSIQ and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Duck KiCad files?

From the CubeShifter/Duck repository on GitHub, at the commit this page was made from: the board is PCB/Duck.kicad_pcb and its schematic Duck.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Duck design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).