Skip to the content

Boards by ColumbiaGadgetWorks

4 boards

Open-source boards designed in KiCad by ColumbiaGadgetWorks on GitHub, from 2 repositories. A board’s address here is its repository’s there.

  • 2 layers60 × 46 mmCardboard bot, the printed circuit board in 3D

    Cardboard bot

    ColumbiaGadgetWorks/cardboard-bot-v2

    60 × 46 mm, 2-layer, 2 oz copper, for a 2S or 3S LiPo on a screw terminal. JLCPCB assembles the SMD parts on the top side; CGW hand-solders the through-hole parts. Nothing goes on the back.

    67 parts
  • 2 layers185 × 128 mmScorbot controller, the printed circuit board in 3D

    Scorbot controller

    ColumbiaGadgetWorks/scorbot

    KiCad project for the replacement controller: an ESP32 DevKit, six Pololu DRV8874 carriers and a DROK mini 5 V buck module plug into a master board, and the robot's DD-50 cable plugs straight into the board edge.

    102 parts
  • 2 layers15.2 × 17.8 mmDrv8874 carrier b, the printed circuit board in 3D

    Drv8874 carrier b

    ColumbiaGadgetWorks/scorbot

    KiCad project for the replacement controller: an ESP32 DevKit, six Pololu DRV8874 carriers and a DROK mini 5 V buck module plug into a master board, and the robot's DD-50 cable plugs straight into the board edge.

    12 parts
  • 2 layers45.7 × 45.6 mmDrv8874 carrier panel, the printed circuit board in 3D

    Drv8874 carrier panel

    ColumbiaGadgetWorks/scorbot

    KiCad project for the replacement controller: an ESP32 DevKit, six Pololu DRV8874 carriers and a DROK mini 5 V buck module plug into a master board, and the robot's DD-50 cable plugs straight into the board edge.

    79 parts