Skip to the content
2 layers58.5 × 51 mmCamera modules pcb, the printed circuit board in 3D

The robot can have three control configurations

Size
58.5 × 51 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
35
Pads
50
Tracks, vias
33, 0
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
10 Sep 2024
Updated
30 Apr 2025

Overview

Camera modules pcb is an open-source printed circuit board by Capstone4-33Enjoyers, from the Capstone4-33Enjoyers/RobotControl repository on GitHub. It is a 2-layer board of 58.5 × 51 mm with 10 parts on 35 nets, routed with 33 tracks and 0 vias.

It is built around the ESP32-CAM and B2B-PH-K-S. Its parts include 3 connectors, 2 resistors and 1 IC. It belongs with the ESP32 and RISC-V boards of this library.

Main components

2

README

README.md

CAPSTONE 2024

Remote Control Robot that is connected to the internet and can be controlled using a remote control, a web app or a mobile app It also has a ML model to detect landmines Note: this is a rough Idea

Overview

The robot can have three control configurations

Basic Functionality

  1. Stream video to the webpage
  2. Collect and send sensor data to the webpage
  3. Plot the data in real time
  4. Go to a provided GPS location
  5. Detect land mines using Classification Model (logistic regression or Neural Network)
  6. Mark locations where mines been found
  7. Move obstacles using the arm

Configuration 1

Robot ↔ Server ↔ webpage/mobile app

Robot is controlled using the application, can be autonomous or manually controlled Protocols:

  • Wifi/Internet

Configuration 2

Robot ↔ Server ↔ webpage/mobile app ↔ Controller

Robot is controlled using the controller which is connected to the application, it is manually controlled Protocols:

  • Wifi/Internet

Configuration 3

Robot → Server → webpage/mobile app ↑ Controller

Robot is controlled using the controller which is connected directly to it, It sends sensor data to the server It is manually controlled

Protocols:

  • Wifi/Internet
  • Bluetooth/radio

Networking Issues

Local Area Network

  • The Robot would need to be on the same wifi network as the server
  • This can be fixed by implementing an onboard wifi sim card router making the robot have its own internet connection and it does not need to be on the same network as long as it has a cellular network
  • As for Configuration 3: the controller would need to be connected to the robot directly, this would run into range issues

Sensors

Data To Be Collected

  • Speed
  • Mission_Time
  • Temperature
  • Voltage
  • Gps Altitude
  • Gps Latitude
  • Gps Longitude
  • Gps Satellites
  • whatever data we need to detect landmines

Sensors

  • Ultra Sonic sensors
  • BMP390
  • RTC
  • GPS PA1616S
  • whatever sensors for data needed to detect landmines

Peripherals

  • Camera
  • Wifi Module
  • Bluetooth Module
  • Motors and Servos
  • built in sim card reader for internet connection

Coding Environments

Languages

  • C++ for robot firmware
  • Node.js or Python Django for the server
  • whichever javascript framework is easier make the gui for the frontend
  • Can we port the webapp to a mobile app? or do we gotta use dart?

Databases

Databases can be used to store locations where mines have been found

MongoDb: Pros: - Easy to implement and deploy - Non-relational database - No SQL - in JSON Format (goated) Cons: - TBD (idk im biased towards mongodb)

SQL: Pros: - TBD (idk im biased towards mongodb) Cons: - Annoying to deploy - Relational database - SQL so queries need to be manually made using string concatenation

Deployment

We can deploy this in different ways

  1. We can use a PaaS Pros: - "Easier" to implement Cons: - can get expensive as FUCK - can run into a shit ton of dependency issues - Needs Docker (i think)

  2. Make our own server using a raspberry pi Pros: - Very cool and fun to implement - relatively easy to implement Cons: - Raspberry pis can be expensive (around $150)

I am leaning more towards the raspberry pi option because it is so cool and one wrong click will not kill our bank account

Robot Chassis

  1. Buy it from amazon or something Pros:

    • No extra work Cons:
    • Expensive
    • Lack of creative control
  2. Make it in the CanSat office Pros:

    • Cheap basically free
    • A lot of creative control Cons:
    • Would need to design it, however I can get Jeremiah to make it for us lol

Parts

10
QtyValueFootprintReferences
2RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2
2~M20_9990246:MLX90640J1, J1
1B2B-PH-K-SB2B-PH-K-S:JST_B2B-PH-K-SJ2
1ESP32-CAMESP32-CAM:ESP32-CAMU1
1~M20_9990246:ESP8266ESP1

The 7 most common of 10 parts.

More from Capstone4-33Enjoyers/RobotControl

1
  • 2 layers106 × 108 mmRobotControl, the printed circuit board in 3D

    RobotControl

    Capstone4-33Enjoyers/RobotControl

    The robot can have three control configurations

    42 parts1

Similar boards

  • 2 layers65 × 30 mmPovbot2, the printed circuit board in 3D

    Povbot2

    wattnotions/povbot2

    Look in 3dprint folder to find a 3mf file with the chassis , camera holder and wheels ready to print.

    29 parts28
  • 2 layers29.1 × 45.1 mmUSB GC2, the printed circuit board in 3D

    USB GC2

    Xenii1642/USB-GC2

    Meet the new generation of USB-C GameCube Power Board. Now compatible with both 12V and 15V chargers. Two voltages, twice the potential.

    23 parts24CERN-OHL-S-2.0
  • 2 layers50 × 100 mmSpoke, the printed circuit board in 3D

    Spoke

    FeruzTopalov/spoke

    Standalone LoRa-based real-time off-grid relative GPS navigation for group of up to 5 people. Improved version of LRNS Eleph

    143 parts16GPL-3.0
  • 4 layers50.9 × 63.2 mmLego gameboy main, the printed circuit board in 3D

    Lego gameboy main

    greigs/OpenBrickGB

    Functional / Playable Lego Game Boy Electronics - PCB Design Files

    56 parts15
  • 4 layers140 × 140 mmPCU, the printed circuit board in 3D

    PCU

    Andresse2020/NovaDrone-Hardware

    Complete electronic system design for a high-performance quadcopter drone, developed entirely from scratch. Includes power distribution, motor control, flight stabilization, sensor integration, and communication…

    760 parts3
  • 2 layers46 × 84 mmMicromouse, the printed circuit board in 3D

    Micromouse

    johnnyou1873/Mouse-Potato

    Micromouse design for AAMC 2024

    64 parts2
  • 4 layers62.8 × 35.5 mmSnowboard, the printed circuit board in 3D

    Snowboard

    kennyegan/Snowboard-Wearable

    This system is designed to help snowboarders visualize, analyze, and improve their performance using a wearable IoT device and a companion mobile application.

    60 parts2

Questions

How big is the Camera modules pcb PCB?

It measures 58.5 × 51 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Camera modules pcb use?

10 parts, built around the ESP32-CAM and B2B-PH-K-S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Camera modules pcb KiCad files?

From the Capstone4-33Enjoyers/RobotControl repository on GitHub, at the commit this page was made from: the board is Hardware/camera_modules_pcb/camera_modules_pcb.kicad_pcb and its schematic Hardware/PCB/PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Camera modules pcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask Capstone4-33Enjoyers before reusing the design.