Skip to the content
2 layers46 × 84 mmMicromouse, the printed circuit board in 3D

Micromouse design for AAMC 2024

Size
46 × 84 mm
Copper layers
2
Thickness
1.6 mm
Parts
64
Nets
87
Pads
274
Tracks, vias
521, 60
Pours
270
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
24 Dec 2023
Updated
27 Feb 2024

Overview

Micromouse is an open-source printed circuit board by johnnyou1873, from the johnnyou1873/Mouse-Potato repository on GitHub. It is a 2-layer board of 46 × 84 mm with 64 parts on 87 nets, routed with 521 tracks and 60 vias.

It is built around the L293DD, ICM-42688-P and B2B-PH-K-S, with the B6B-ZR and EG1218 among its other parts. Its parts include 23 capacitors, 16 connectors, 6 resistors, 4 ICs and 3 diodes. It belongs with the STM32 boards of this library.

Main components

5

README

README.md

Mouse-Potato

Micromouse design for AAMC 2024

Major Components

Microcontroller

STMicroelectronics STM32F411RETx

Motors

2x CHF-GW12T-N20VA ABHL DC Worm Gear Motor

Motor Driver

STMicroelectronics L293DD

IMU

TDK InvenSense ICM-42688-P

ToF Sensors

3x Adafruit VL6180X Time of Flight Micro-LIDAR Distance Sensor Breakout

Parts

64
QtyValueFootprintReferences
90.1 uFCapacitor_SMD:C_0603_1608MetricC1, C4, C7, C9, C10, C12, C14, C17, C23
44.7 uFCapacitor_SMD:C_0603_1608MetricC3, C16, C18, C20
3100 ohmResistor_SMD:R_0603_1608MetricR1, R3, R5
310kResistor_SMD:R_0603_1608MetricR2, R4, R6
32V 20mALED_SMD:LED_0603_1608MetricD1, D2, D3
3PINHD_1x6_FemaleConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ1, J2, J4
210 uFCapacitor_SMD:C_0603_1608MetricC19, C22
212 pFCapacitor_SMD:C_0603_1608MetricC2, C5
2B2B-PH-K-SB2B_PH_K_S_LF__SN_:JST_B2B-PH-K-S_LF__SN_J10, J11
2B6B-ZRB6B_ZR:CONN_B6B-ZR_JSTJ9, J13
2LOGOLOGOG***, G***
2NetTie_2NetTie:NetTie-2_SMD_Pad0.5mmNT1, NT2
2PINHD_1x4_FemaleConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ3, J5
1 18 pFCapacitor_SMD:C_0603_1608MetricC8
11 uFCapacitor_SMD:C_0603_1608MetricC11
110 nFCapacitor_SMD:C_0603_1608MetricC13
1120 ohmInductor_SMD:L_0603_1608MetricFB1
118 pFCapacitor_SMD:C_0603_1608MetricC6
12.2 uFCapacitor_SMD:C_0603_1608MetricC15
122 uFCapacitor_SMD:C_0603_1608MetricC21
125 MHz 10 pFRH100_25_000_10_F_3030_EXT_TR:XTAL4P_RH100-25.000-10-F-3030-EXT-TR_RALY2
132.768 kHz 7 pFSC32S_7PF20PPM:XTAL_SC32S-7PF20PPM_EPSY1
1AZ1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U4
1EG1218digikey-footprints:Switch_Slide_11.6x4mm_EG1218SW1
1ICM-42688-PICM-42688-P:PQFN50P300X250X97-14NU2
1L293DDL293DD:SOIC127P1032X265-20NU3
1Leftcustom:MM_Motor_LeftM1
1PINHD_1x2_FemaleConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ8
1PINHD_1x2_MaleConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ16
1PINHD_1x5_FemaleConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ12
1PINHD_1x6_FemaleConnector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_VerticalJ6
1PINHD_1x6_MaleConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ15
1PINHD_1x8_FemaleConnector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_VerticalJ7
1PINHD_1x8_MaleConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ14
1Push_ButtonJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmSW3
1Rightcustom:MM_Motor_RightM2
1STM32F411RETxPackage_QFP:LQFP-64_10x10mm_P0.5mmU1
1SW_DIP_x04218-4LPST:218-4LPSTSW2

More from johnnyou1873/Mouse-Potato

2
  • 2 layers50 × 71 mmMicromouse v0, the printed circuit board in 3D

    Micromouse v0

    johnnyou1873/Mouse-Potato

    Micromouse design for AAMC 2024

    62 parts2
  • 2 layers18 × 28 mmMicromouse PD, the printed circuit board in 3D

    Micromouse PD

    johnnyou1873/Mouse-Potato

    Micromouse design for AAMC 2024

    9 parts2

Similar boards

  • 2 layers84 × 114 mmElec, the printed circuit board in 3D

    Elec

    elkel53930/robosweep_twilight

    A robosweeper "Twilight"

    109 parts2MIT
  • 4 layersElec, the printed circuit board in 3D

    Elec

    elkel53930/twilight2

    A robosweep agent Twilight-2

    164 parts
  • 2 layers100 × 80 mmMm3.0, the printed circuit board in 3D

    Mm3.0

    USI-27/microMouse

    A fully autonomous micro mouse built from scratch

    57 parts
  • 2 layers81.8 × 93 mmMicromouse Project 5, the printed circuit board in 3D

    Micromouse Project 5

    bennyman334/Micromouse-2025

    PCB + Schematic for UCLA IEEE Micromouse

    69 parts
  • 2 layers75 × 87 mmMicromouse Mainboard, the printed circuit board in 3D

    Micromouse Mainboard

    louisquantran/Micromouse

    PCB design for a Micromouse: a small autonomous robot that maps and solves a maze.

    75 parts
  • 2 layers136.5 × 185 mmFaduino-1, the printed circuit board in 3D

    Faduino-1

    silveirago/Faduino

    The Faduino is a DIY MIDI controller inspired in the Presonus Faderport. It has one motorized fader, a rotary encoder and several silicone buttons, plus two PCBs.

    101 parts45
  • 2 layers90.5 × 27.7 mmGR Slide Pot Controller, the printed circuit board in 3D

    GR Slide Pot Controller

    GadgetReboot/PSM60_Fader_Controller

    Motorized fader pot controller

    44 parts9
  • 2 layers102.6 × 102.6 mmMini robot2, the printed circuit board in 3D

    Mini robot2

    eliasmonzon/pcb

    circuitos_electronicos

    67 parts1

Questions

How big is the Micromouse PCB?

It measures 46 × 84 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Micromouse use?

64 parts, built around the L293DD, ICM-42688-P, B2B-PH-K-S and B6B-ZR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Micromouse KiCad files?

From the johnnyou1873/Mouse-Potato repository on GitHub, at the commit this page was made from: the board is pcb/micromouse.kicad_pcb and its schematic pcb/3V3_linear_regulator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Micromouse design in my own project?

Its repository states no licence, so its author keeps all rights: ask johnnyou1873 before reusing the design.