2 layers20.3 × 69.7 mm
PG attiny404
fabiansteiner/OpenValve
3D-printable pinch valve for irrigation and sensor-driven liquid control.
41 parts276CERN-OHL-S-2.0
2 layers90.5 × 27.7 mm
GR Slide Pot Controller
GadgetReboot/PSM60_Fader_Controller9Motorized fader pot controller
- Size
- 90.5 × 27.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 41
- Pads
- 123
- Tracks, vias
- 336, 123
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 May 2022
- Updated
- 27 Nov 2023
Overview
GR Slide Pot Controller is an open-source printed circuit board by GadgetReboot, from the GadgetReboot/PSM60_Fader_Controller repository on GitHub. It is a 2-layer board of 90.5 × 27.7 mm with 44 parts on 41 nets, routed with 336 tracks and 123 vias.
It is built around the ATTINY804-SSN, L293DD and PSM60-081A-103B2. Its parts include 22 resistors, 7 capacitors, 6 connectors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATTINY804-SSN
SOIC-14-40℃~+105℃ 1.8V~5.5V 10bit 12 128Byte 20MHz 512Byte 8 Bit 8KB AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
L293DD
SOP-200℃~+70℃ 2 2 4.5V~36V 4.5V~7V 600mA Bipolar Driver Yes SOP-20 Stepper Motor Driver ROHSGcoreMotor Driver ICsPSM60-081A-103B2
插件Potentiometers & Variable ResistorsBourns
README
KiCad/readme.mdDesign files
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 0r | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R4, R5, R10, R11, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22 +3 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C5 |
| 2 | 10uF 16v | Capacitor_SMD:C_Elec_4x5.4 | C4, C6 |
| 2 | Conn_01x02 | Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | J5, J9 |
| 2 | Conn_01x04 | Connector_JST:JST_XH_S4B-XH-A-1_1x04_P2.50mm_Horizontal | J7, J8 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R12 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3 |
| 1 | ATtiny804-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x03 | Connector_JST:JST_XH_S3B-XH-A-1_1x03_P2.50mm_Horizontal | J6 |
| 1 | L293DD | footprints:L293DD | U4 |
| 1 | LOGO | _Custom_Footprints:pcb way logo | G*** |
| 1 | PSM60-081A-103B2 | footprints:PSM60-081A-103B2 | R7 |
Similar boards
- 2 layers58 × 42 mm
GR ATTiny LED
GadgetReboot/8ChLED
8 Addressable LEDs show logic input high/low states for easy probing
55 parts3 - 2 layers47.2 × 33.6 mm
Hackeriet imponator
hackeriet/imponator
The MCU has a 100nF capacitor between VCC and GND. This is quite standard for MCUs and sensors, but to be sure, check the datasheet.
45 parts2Apache-2.0 - 2 layers136.5 × 185 mm
Faduino-1
silveirago/Faduino
The Faduino is a DIY MIDI controller inspired in the Presonus Faderport. It has one motorized fader, a rotary encoder and several silicone buttons, plus two PCBs.
101 parts45 - 2 layers46 × 84 mm
- 2 layers102.6 × 102.6 mm
- 2 layers148 × 100 mm
Vikhr30-efi
almirpangor/VIHR-30-EFI
Блок управления впрыском и зажиганием для лодочного мотора «Вихрь-30»
98 parts - 2 layers81.8 × 93 mm
Questions
How big is the GR Slide Pot Controller PCB?
It measures 90.5 × 27.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GR Slide Pot Controller use?
44 parts, built around the ATTINY804-SSN, L293DD and PSM60-081A-103B2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GR Slide Pot Controller KiCad files?
From the GadgetReboot/PSM60_Fader_Controller repository on GitHub, at the commit this page was made from: the board is KiCad/GR_Slide_Pot_Controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the GR Slide Pot Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask GadgetReboot before reusing the design.