Skip to the content
2 layers25.7 × 76 mmTelemetry, the printed circuit board in 3D

PCB board designs with KiCAD 8

Size
25.7 × 76 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
34
Pads
75
Tracks, vias
103, 14
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
12 Mar 2026
Updated
12 Mar 2026

Overview

Telemetry is an open-source printed circuit board by CanGulmez, from the CanGulmez/PCB-Designs repository on GitHub. It is a 2-layer board of 25.7 × 76 mm with 16 parts on 34 nets, routed with 103 tracks and 14 vias.

It is built around the CP2102 and USBLC6-2SC6. Its parts include 6 resistors, 5 capacitors, 2 ICs, 2 connectors and 1 diode.

Main components

2

README

README.md

PCB Board Designs with KiCAD 8

Parts

16
QtyValueFootprintReferences
50.1uFCapacitor_SMD:C_0805_2012MetricC1, C2, C3, C4, C5
34k7Resistor_SMD:R_0805_2012MetricR3, R5, R6
222Resistor_SMD:R_0805_2012MetricR1, R2
1220Resistor_SMD:R_0805_2012MetricR4
1565790576565790576:56579-0576_MOLJ1
1CP2102CP2102:QFN50P500X500X100-29NU2
1Conn_01x07_SocketConnector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_VerticalJ2
1LEDLED_SMD:LED_0805_2012MetricD1
1USBLC6-2SC6USBLC6-2SC6:SOT95P280X145-6NU1

More from CanGulmez/PCB-Designs

8
  • 2 layersBeehiveSat SBC, the printed circuit board in 3D

    BeehiveSat SBC

    CanGulmez/PCB-Designs

    PCB board designs with KiCAD 8

    351 parts
  • 2 layersSmartBP MCU, the printed circuit board in 3D

    SmartBP MCU

    CanGulmez/PCB-Designs

    PCB board designs with KiCAD 8

    88 parts
  • 2 layers32.3 × 73.8 mmReceiver LoRa, the printed circuit board in 3D

    Receiver LoRa

    CanGulmez/PCB-Designs

    PCB board designs with KiCAD 8

    18 parts
  • 2 layers63 × 14.3 mmBLDC Motor Plugin, the printed circuit board in 3D

    BLDC Motor Plugin

    CanGulmez/PCB-Designs

    PCB board designs with KiCAD 8

    15 parts
  • 2 layers91.6 × 60 mmEV Control System, the printed circuit board in 3D

    EV Control System

    CanGulmez/PCB-Designs

    PCB board designs with KiCAD 8

    15 parts
  • 2 layers13.1 × 0.1 mmSmartBP PVDF, the printed circuit board in 3D

    SmartBP PVDF

    CanGulmez/PCB-Designs

    PCB board designs with KiCAD 8

    12 parts
  • 2 layers10.1 × 5 mmSmartBP SG, the printed circuit board in 3D

    SmartBP SG

    CanGulmez/PCB-Designs

    PCB board designs with KiCAD 8

    9 parts
  • 2 layersSmartBP MEMS, the printed circuit board in 3D

    SmartBP MEMS

    CanGulmez/PCB-Designs

    PCB board designs with KiCAD 8

    2 parts

Similar boards

  • 2 layers60 × 36 mmArcar, the printed circuit board in 3D

    Arcar

    wykys/vut-arcar

    VUT UREL Autonomous Racing Car

    55 parts3MIT
  • 2 layers30 × 13.7 mmPTT USB Cable, the printed circuit board in 3D

    PTT USB Cable

    UT8IFG/PTT-USB-Cable

    A simple galvanically isolated USB-PTT interface for amateur radio equipment

    25 parts2MIT
  • 2 layers25.7 × 76 mmTelemetry, the printed circuit board in 3D

    Telemetry

    CanGulmez/EV-Control-System

    Linux based EV Control System developed for BeagleBone Black Rev C

    16 partsMIT
  • 2 layers83 × 43 mmRouter, the printed circuit board in 3D

    Router

    laser-game/router-hw

    Devices for route wireless communication between the control computer and laser game devices.

    62 parts
  • 4 layers136 × 95 mmGamepad PCB, the printed circuit board in 3D

    Gamepad PCB

    pacman314159/Multipurpose_ESP32_Gamepad

    140 parts
  • 4 layers50 × 50 mmFC v02, the printed circuit board in 3D

    FC v02

    pacman314159/OISP-Drone-Research

    mermaid stateDiagram-v2 [] --> POWERON POWERON --> BOOTINIT: Power Applied / Reset BOOTINIT --> SENSORCALIBRATION: Hardware Self-Test Pass BOOTINIT --> SYSTEMERROR: Self-Test Fail SENSORCALIBRATION --> DISARMED…

    87 parts
  • 2 layers178 × 145 mmUltra DB X51 v1, the printed circuit board in 3D

    Ultra DB X51 v1

    ExploreEmbedded/8051_DevelopmentBoard

    Design files and sample code for 8051 development Ultra Boards

    145 parts70
  • 2 layers55 × 55 mmLeafNode v3.1, the printed circuit board in 3D

    LeafNode v3.1

    leafai-io/leaf-node-v3.x

    Modular node for sensor monitoring and device control in grow environments.

    91 parts47

Questions

How big is the Telemetry PCB?

It measures 25.7 × 76 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Telemetry use?

16 parts, built around the CP2102 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Telemetry KiCad files?

From the CanGulmez/PCB-Designs repository on GitHub, at the commit this page was made from: the board is Telemetry/Telemetry.kicad_pcb and its schematic BLDC Motor Driver/BLDC Motor Driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Telemetry design in my own project?

Its repository states no licence, so its author keeps all rights: ask CanGulmez before reusing the design.