2 layers
2 layers
BeehiveSat SBC
CanGulmez/PCB-DesignsPCB board designs with KiCAD 8
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 351
- Nets
- 595
- Pads
- 1,459
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 12 Mar 2026
- Updated
- 12 Mar 2026
Overview
BeehiveSat SBC is an open-source printed circuit board by CanGulmez, from the CanGulmez/PCB-Designs repository on GitHub. It is a 2-layer board with 351 parts on 595 nets.
It is built around the AM3358BZCZ100, LAN8710A-EZC and EMMC04G-MK27-A01C, with the TPD4S009DGSR-TP, TPD4S012DRYR-TP and 24LC32AT-I/OT among its other parts. Its parts include 166 resistors, 159 capacitors, 17 ICs, 5 connectors and 2 switches. It belongs with the computers and single-board computers boards of this library.
Main components
12
AM3358BZCZ100
NFBGA-3240℃~+90℃ 1.8V、3.3V 1GHz 32 Bit 4KB 64KB ARM Cortex-ASeries NFBGA-324 Microcontrollers (MCU/MPU/SOC) ROHSTexas InstrumentsMicrocontrollers (MCU/MPU/SOC)
LAN8710A-EZC
QFN-32-EP(5x5)0℃~+85℃ 1 1.6V~3.6V 10BASE-T、100BASE-TX 10Mbit/s、100Mbit/s MII、RMII PHY Transceiver QFN-32-EP(5x5) Ethernet Transceivers ROHSMicrochip TechnologyEthernet Transceivers
EMMC04G-MK27-A01C
LFBGA-153(11.5x13)4GB Built-in wear leveling function、ECC error correction function、Hardware reset function、Secure erase function MLC eMMC 5.0 LFBGA-153(11.5x13) eMMC ROHSKingston TechnologyNAND FLASH
TPD4S009DGSR-TP
MSOP-10ESD And Surge Protection (TVS/ESD)TECH PUBLIC
TPD4S012DRYR-TP
DFN1510-60.35pF、11pF 100nA 10V 3A@8/20us 5.5V、15V 80W@8/20us 9V、24V IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 DFN1510-6 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
24LC32AT-I/OT
SOT-23-5-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 32Kbit 400kHz 5ms Hardware write protection function、Noise suppression function I2C SOT-23-5 EEPROM ROHSMicrochip TechnologyEEPROM
SN74LVC1G06DCKR
SOT-353SOT-353 Inverters ROHSTECH PUBLICInvertersTPS65217CRSLR
VQFN-48(6x6)VQFN-48(6x6) Power Management - Specialized ROHSTexas InstrumentsPower Management - Specialized
KMR231GLFS
SMD,4.6x2.8mm-40℃~+85℃ 1.9mm 2.8mm 32V 3N 4.6mm 50mA Gull Wing Round Button SPST Surface Mount,Vertical SMD,4.6x2.8mm Tactile Switches ROHSC&KTactile Switches100UF 10V 4*7
插件,4x7mm1.5mm 1000hrs@105℃ 100uF 10V 4mm 7mm 插件,4x7mm Aluminum Electrolytic Capacitors - Leaded ROHSLCSCAluminum Electrolytic Capacitors - Leaded10118241-001RLF
SMDSMD HDMI Connectors ROHSAmphenolD-Sub / VGA ConnectorsLPJ0011BBNL
插件UncategorisedLink-PP Intl Technology
README
README.mdPCB Board Designs with KiCAD 8
Parts
351| Qty | Value | Footprint | References |
|---|---|---|---|
| 88 | 100nF,16V | Capacitor_SMD:C_0603_1608Metric | C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112, C113, C114, C115, C116 +72 |
| 39 | 100K,1% | Resistor_SMD:R_0603_1608Metric | R74, R75, R76, R77, R100, R101, R102, R103, R104, R105, R107, R115, R116, R119, R120, R150 +23 |
| 34 | 10K,1% | Resistor_SMD:R_0603_1608Metric | R14, R15, R16, R17, R18, R19, R106, R114, R117, R118, R121, R122, R123, R149, R151, R153 +18 |
| 21 | 0R,5% | Resistor_SMD:R_0603_1608Metric | R5, R11, R28, R128, R129, R133, R136, R146, R147, R154, R155, R156, R157, R160, R161, R162 +5 |
| 20 | 10uF,16V | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C6, C7, C10, C12, C14, C17, C18, C35, C36, C100, C127, C152, C153 +4 |
| 20 | 33R,5% | Resistor_SMD:R_0603_1608Metric | R108, R109, R110, R111, R112, R113, R130, R134, R135, R137, R138, R139, R140, R141, R142, R143 +4 |
| 12 | 47pF,50V | Capacitor_SMD:C_0603_1608Metric | C53, C54, C55, C56, C58, C59, C60, C61, C68, C70, C72, C74 |
| 11 | 10pF,50V | Capacitor_SMD:C_0603_1608Metric | C42, C43, C44, C45, C57, C76, C79, C80, C81, C82, C88 |
| 10 | 100R,1% | Resistor_SMD:R_0603_1608Metric | R33, R34, R35, R36, R37, R38, R39, R45, R47, R48 |
| 9 | 1.5K,1% | Resistor_SMD:R_0603_1608Metric | R3, R4, R13, R56, R59, R63, R65, R69, R70 |
| 8 | 2.2uF,10V | Capacitor_SMD:C_0603_1608Metric | C11, C13, C37, C64, C66, C69, C73, C77 |
| 6 | 4.7K,1% | Resistor_SMD:R_0603_1608Metric | R131, R132, R158, R163, R164, R165 |
| 5 | 33R,1% | Resistor_SMD:R_0603_1608Metric | R40, R41, R42, R43, R46 |
| 5 | 49.9R,1% | Resistor_SMD:R_0603_1608Metric | R52, R53, R54, R55, R145 |
| 4 | 18pF,50V | Capacitor_SMD:C_0603_1608Metric | C129, C131, C133, C135 |
| 4 | 2.2K,5% | Resistor_SMD:R_0603_1608Metric | R124, R125, R126, R127 |
| 3 | 33p,50V | Capacitor_SMD:C_0603_1608Metric | C38, C39, C40 |
| 3 | 470R,5% | Resistor_SMD:R_0603_1608Metric | R10, R60, R61 |
| 3 | 470pF,50V | Capacitor_SMD:C_0603_1608Metric | C1, C51, C52 |
| 2 | 100pF,50V | Capacitor_SMD:C_0603_1608Metric | C62, C63 |
| 2 | 10R,1% | Resistor_SMD:R_0603_1608Metric | R31, R32 |
| 2 | 1M,1% | Resistor_SMD:R_0603_1608Metric | R30, R148 |
| 2 | 1nF,50V | Capacitor_SMD:C_0603_1608Metric | C28, C85 |
| 2 | 280K,1% | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | DDC114YU-7-F | DDC114YU-7-F:SOT65P210X110-6N | U11, U12 |
| 2 | KMR231GLFS | KMR231GLFS:SW4SMD_63X161LS | S1, S2 |
| 2 | TPD4S009DGSR | TPD4S009DGSR:SOP50P490X110-10N | U8, U9 |
| 2 | TPD4S012DRYR | TPD4S012DRYR:PSON50P145X100X60-6N | U16, U18 |
| 1 | 0R,1% | Resistor_SMD:R_0603_1608Metric | R29 |
| 1 | 100uF,10V | Capacitor_SMD:C_0603_1608Metric | C155 |
| 1 | 10118241-001RLF | 10118241-001RLF:AMPHENOL_10118241-001RLF | J5 |
| 1 | 12.1K,1% | Resistor_SMD:R_0603_1608Metric | R51 |
| 1 | 1uF,10V | Capacitor_SMD:C_0603_1608Metric | C134 |
| 1 | 1uF,16V | Capacitor_SMD:C_0603_1608Metric | C137 |
| 1 | 2.2nF,10V | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 22nF,50V | Capacitor_SMD:C_0603_1608Metric | C49 |
| 1 | 240R,1% | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 24lc32at-i/ot | 24LC32AT-I-OT:SOT-23-5_MC_MCH | U10 |
| 1 | 27K,1% | Resistor_SMD:R_0603_1608Metric | R73 |
| 1 | 292303-6 | 292303-6:TE_292303-6 | J9 |
| 1 | 4.7uF,10V | Capacitor_SMD:C_0603_1608Metric | C41 |
| 1 | 47219-2001 | 47219-2001:MOLEX_47219-2001 | J6 |
| 1 | AM3358BZCZ100 | AM3358BZCZ100:BGA324C80P18X18_1500X1500X140 | U14 |
| 1 | EMMC04G-MK27-A01C | EMMC04G-MK27-A01C:BGA153N50P14X14_1300X1150X100N | U4 |
| 1 | LAN8710A-EZC | LAN8710A-EZC:QFN50P500X500X100-33N | U6 |
| 1 | LPJ0011BBNL | LPJ0011BBNL:LPJ0011BBNL_LPP | J4 |
| 1 | RB751V40.115 | RB751V40.115:RB751V40.115 | D2 |
| 1 | SG-210SCD | Oscillator:Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mm | Y2 |
| 1 | SN74LVC1G06DCKR | SN74LVC1G06DCKR:SOT65P210X110-5N | U13 |
| 1 | SN74LVC1G74DCTR | SN74LVC1G74DCTR:SOP65P400X130-8N | U19 |
| 1 | SN74LVC2G241DCUR | SN74LVC2G241DCUR:SOP50P310X90-8N | U15 |
| 1 | TDA19988BHN_C1_557 | TDA19988BHN_C1_557:QFN50P900X900X100-65N | U7 |
| 1 | TL5209DR | TL5209DR:SOIC127P599X175-8N | U1 |
| 1 | TPS2051BDGNRG4 | TPS2051BDGNRG4:SOP65P490X110-9N | U17 |
| 1 | TPS65217CRSLR | TPS65217CRSLR:IC_TPS65217CRSLR | U2 |
| 1 | UX60-MB-5ST | digikey-footprints:USB_Mini_B_Female_UX60-MB-5ST | J8 |
More from CanGulmez/PCB-Designs
8- 2 layers32.3 × 73.8 mm
- 2 layers25.7 × 76 mm
- 2 layers63 × 14.3 mm
- 2 layers91.6 × 60 mm
- 2 layers13.1 × 0.1 mm
- 2 layers10.1 × 5 mm
- 2 layers
Similar boards
- 6 layers86.4 × 54.6 mm
BeagleBone Black.unrouted
The-OpenROAD-Project-Attic/SA-PCB
Annealing-based PCB placement tool
275 parts44BSD-3-Clause - 12 layers86.4 × 54.6 mm
Beaglebone ai rev a2
embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products
766 parts8MIT - 4 layers105 × 140 mm
- 2 layers70 × 100 mm
- 2 layers32.2 × 20 mm
- 2 layers136 × 92 mm
BB3plus DSI TFT display
eez-open/eez-bb3plus
EEZ Bench Box 3 Plus (BB3+) Modular T&M chassis
50 parts13 - 4 layers60 × 60 mm
- 4 layers66 × 38 mm
Fan power health
AxelMcKenna/AFX-1000
RMX-1000-inspired effects processor for macOS, AU and VST3, built on a shared C++20 engine. Standalone Daisy Seed 3 hardware with two main PCBs and a custom housing is in development.
84 parts1
Questions
What parts does the BeehiveSat SBC use?
351 parts, built around the AM3358BZCZ100, LAN8710A-EZC, EMMC04G-MK27-A01C and TPD4S009DGSR-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BeehiveSat SBC KiCad files?
From the CanGulmez/PCB-Designs repository on GitHub, at the commit this page was made from: the board is BeehiveSat/BeehiveSat SBC/BeehiveSat SBC.kicad_pcb and its schematic BLDC Motor Driver/BLDC Motor Driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BeehiveSat SBC design in my own project?
Its repository states no licence, so its author keeps all rights: ask CanGulmez before reusing the design.