Skip to the content
33

LAN8710A-EZC

Microchip TechnologyExtended

0℃~+85℃ 1 1.6V~3.6V 10BASE-T、100BASE-TX 10Mbit/s、100Mbit/s MII、RMII PHY Transceiver QFN-32-EP(5x5) Ethernet Transceivers ROHS

Part id
microchip/LAN8710A-EZC
Category
Ethernet Transceivers
Package
QFN-32-EP(5x5)
Pins
33
In stock
97 at JLCPCB (C633277)
Used on
9 open-source boards

Overview

The LAN8710A-EZC is an ethernet Transceiver made by Microchip Technology in a QFN-32-EP(5x5) package with 33 pins. 0℃~+85℃ 1 1.6V~3.6V 10BASE-T、100BASE-TX 10Mbit/s、100Mbit/s MII、RMII PHY Transceiver QFN-32-EP(5x5) Ethernet Transceivers ROHS.

PCBKit's library has its KiCad symbol (Interface_Ethernet:LAN8710A, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm, from KiCad's library), ready for a KiCad board. 97 are in stock at JLCPCB (part C633277). 9 open-source boards in 8 repositories on GitHub use it.

Symbol

1VDD2A2LED2/INTSEL3LED1/REGOFF4XTAL25XTAL1/CLKIN6VDDCR7RXCLK/PHYAD18RXD3/PHYAD29RXD2/RMIISEL10RXD1/MODE111RXD0/MODE012VDDIO13RXER/RXD4/PHYAD014CRS15COL/CRS_DV/MODE216MDIO17MDC18INT/TXER/TXD419RST20TXCLK21TXEN22TXD023TXD124TXD225TXD326RXDV27VDD1A28TXN29TXP30RXN31RXP32RBIAS33VSS
Interface_Ethernet:LAN8710AFrom KiCad's library

Footprint

33
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mmFrom KiCad's library

Pinout

33
The pins of the LAN8710A-EZC
PinNameType
1VDD2APower in
2LED2/INTSELInput/output
3LED1/REGOFFInput/output
4XTAL2Output
5XTAL1/CLKINInput
6VDDCRPower in
7RXCLK/PHYAD1Input/output
8RXD3/PHYAD2Input/output
9RXD2/RMIISELInput/output
10RXD1/MODE1Input/output
11RXD0/MODE0Input/output
12VDDIOPower in
13RXER/RXD4/PHYAD0Input/output
14CRSOutput
15COL/CRS_DV/MODE2Input/output
16MDIOInput/output
17MDCInput
18INT/TXER/TXD4Input/output
19RSTInput
20TXCLKOutput
21TXENInput
22TXD0Input
23TXD1Input
24TXD2Input
25TXD3Input
26RXDVOutput
27VDD1APower in
28TXNInput/output
29TXPInput/output
30RXNInput/output
31RXPInput/output
32RBIASPassive
33VSSPower in

Open-source boards using it

9See all 9
  • 2 layers66.7 × 46.7 mmPostmaster, the printed circuit board in 3D

    Postmaster

    philips-software/amp-postmaster

    Postmaster is a device that clicks on top of an STM32 Nucleo-F767ZI board from ST Microelectronics, and through its Ethernet connector you can program the Nucleo and communicate with it.

    59 parts8MIT
  • 4 layers65 × 50 mm100BASE TX PHY Card, the printed circuit board in 3D

    100BASE TX PHY Card

    Johannes4Linux/Ethernet_PCBs

    PCBs for my GNU/Linux & Ethernet Tutorials

    41 parts3CERN-OHL-S-2.0
  • 2 layersBeehiveSat SBC, the printed circuit board in 3D

    BeehiveSat SBC

    CanGulmez/PCB-Designs

    PCB board designs with KiCAD 8

    351 parts
  • 4 layers71 × 83 mmStud main, the printed circuit board in 3D

    Stud main

    Dimadeda/Smart-Faculty-

    80 parts
  • 4 layers82.5 × 45 mmEumesmo poe-2rl v1, the printed circuit board in 3D

    Eumesmo poe-2rl v1

    thermseekr/eumesmo-poe-2rl

    PoE-powered ESP32 controller featuring 2x onboard SPST NO relays. Ideal for access control, doors, or isolated zones.

    109 parts
  • 4 layers105 × 140 mmVna r1, the printed circuit board in 3D

    Vna r1

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    555 parts205
  • 2 layers75 × 50 mmOpeneew openeew sensor pcb, the printed circuit board in 3D

    Openeew openeew sensor pcb

    punkfab/pcb-corpus

    235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

    104 parts1

Parts like it

5

Questions

Is there a KiCad symbol and footprint for the LAN8710A-EZC?

Yes. The symbol is Interface_Ethernet:LAN8710A and the footprint Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LAN8710A-EZC?

QFN-32-EP(5x5), with 33 pins. Its footprint is drawn on this page.

Where is the LAN8710A-EZC datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the LAN8710A-EZC?

JLCPCB lists it as part C633277, with 97 in stock; the sellers' links on this page open their listings.

What can replace the LAN8710A-EZC?

Parts like it in the library: the LAN8710A-EZC-TR by Microchip Technology, the LAN8710AI-EZK by Microchip Technology, the LAN8710A-EZC-TR-ABC by Microchip Technology and the LAN8710A-EZK-TR by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LAN8710A-EZC?

9 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.