

Arcar
VUT UREL Autonomous Racing Car
- Size
- 60 × 36 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 88
- Pads
- 241
- Tracks, vias
- 583, 85
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20170922)
- Created
- 27 Oct 2017
- Updated
- 12 Nov 2018
Overview
Arcar is an open-source printed circuit board by wykys, from the wykys/vut-arcar repository on GitHub, published under the MIT licence. It is a 2-layer board of 60 × 36 mm with 55 parts on 88 nets, routed with 583 tracks and 85 vias.
It is built around the ATMEGA328PB-AU, CP2102 and LSM9DS1, with the ULN2003A and USBLC6-2SC6 among its other parts. Its parts include 19 capacitors, 10 resistors, 9 diodes, 8 ICs and 4 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5ATMEGA328PB-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 27 2KB 32KB 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog、Touch function TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)CP2102
-Non-isolated TYPE-A UART(TTL) USB2.0 - USB Conversion Modules ROHSAi-ThinkerUSB Conversion ModulesLSM9DS1
LGA-24(3x3.5)-40℃~+85℃ 1.9V~3.6V 16bit Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-24(3x3.5) Accelerometers ROHSSTMicroelectronicsAccelerometersULN2003A
SOP-16-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 50V Seven channels SOP-16 Darlington Transistor Arrays ROHSUMWDarlington Transistor ArraysUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
README
README.mdVUT UREL Autonomous Racing Car
Main board photo.

Bluetooth GATT
# UUID service:
49535343-FE7D-4AE5-8FA9-9FAFD205E455
# UUID write charasteristic
49535343-8841-43F4-A8D4-ECBE34729BB3
# UUID read charasteristic
49535343-1E4D-4BD9-BA61-23C647249616 configuration Serial-Bluetooth

Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C3, C4, C5, C6, C7, C10, C11, C12, C13 |
| 5 | SK32SMA | Diodes_SMD:D_SMA | D5, D6, D7, D8, D9 |
| 4 | 10k | Resistors_SMD:R_0805_HandSoldering | R1, R4, R5, R9 |
| 4 | 1k | Resistors_SMD:R_0805_HandSoldering | R6, R7, R8, R10 |
| 4 | LED | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | D1, D2, D3, D4 |
| 2 | 10n | Capacitors_SMD:C_0805_HandSoldering | C8, C9 |
| 2 | 1u/50V | Capacitors_SMD:C_0805_HandSoldering | C18, C19 |
| 2 | 4700u/35V | Capacitors_THT:CP_Radial_D4.0mm_P1.50mm | C15, C17 |
| 2 | 4k7 | Resistors_SMD:R_0805_HandSoldering | R2, R3 |
| 2 | screw | wyk_mech:screw_M3 | M1, M2 |
| 1 | 10u | Capacitors_SMD:C_0805_HandSoldering | C14 |
| 1 | 470n | Capacitors_SMD:C_0805_HandSoldering | C16 |
| 1 | ATMEGA328PB-AU | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U2 |
| 1 | AVR_ISP_02X03 | Connectors:IDC_Header_Straight_6pins | P1 |
| 1 | CP2102 | Housings_DFN_QFN:QFN-28-1EP_5x5mm_Pitch0.5mm | U3 |
| 1 | LOGO | wyk_logo:VUT-FEKT_small | G*** |
| 1 | LOGO | wyk_logo:wykys_small_skill | G*** |
| 1 | LSM9DS1 | Housings_LGA:LGA-24L_3x3.5mm_Pitch0.43mm | U5 |
| 1 | MCP1804T-3302I/DB | TO_SOT_Packages_SMD:SOT-223-3_TabPin2 | U8 |
| 1 | MOTOR | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | POWER | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J3 |
| 1 | RN4871 | wyk_rf_modules:RN4871 | U7 |
| 1 | SW_Push | Buttons_Switches_THT:SW_PUSH_6mm_h5mm | SW1 |
| 1 | TLE52062GAUMA1 | TO_SOT_Packages_SMD:TO-263-7_TabPin4 | U6 |
| 1 | ULN2003A | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U4 |
| 1 | USBLC6-2SC6 | TO_SOT_Packages_SMD:SOT-23-6 | U1 |
| 1 | USB_B_Micro | Connectors_USB:USB_Micro-B_Wuerth-614105150721_Vertical_CircularHoles | J1 |
Similar boards
- 2 layers38.5 × 47.2 mm

- 2 layers70.2 × 53.3 mm

- 2 layers340 × 100 mm

Queue Local Display ATmega328PB
ByNS-KARACA/Queue-Local-Display-ATmega328PB
Queue Local Display – ATmega328PB
206 parts - 4 layers100 × 50 mm

Gps seven seg clock
JWehle/gps-seven-seg-clock
A large seven segment clock that uses highly accurate GPS time.
74 partsApache-2.0 - 4 layers57 × 74.3 mm

CM4
ybabs/H745FCS
Quadcopter Flight Controller based on the dual core STM32H745 Microcontroller
101 parts6 - 2 layers30 × 13.7 mm

PTT USB Cable
UT8IFG/PTT-USB-Cable
A simple galvanically isolated USB-PTT interface for amateur radio equipment
25 parts2MIT - 2 layers25.7 × 76 mm

Telemetry
CanGulmez/EV-Control-System
Linux based EV Control System developed for BeagleBone Black Rev C
16 partsMIT - 2 layers83 × 43 mm

Router
laser-game/router-hw
Devices for route wireless communication between the control computer and laser game devices.
62 parts
Questions
How big is the Arcar PCB?
It measures 60 × 36 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Arcar use?
55 parts, built around the ATMEGA328PB-AU, CP2102, LSM9DS1 and ULN2003A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arcar KiCad files?
From the wykys/vut-arcar repository on GitHub, at the commit this page was made from: the board is hw/arcar.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arcar design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).