

Router
Devices for route wireless communication between the control computer and laser game devices.
- Size
- 83 × 43 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 92
- Pads
- 236
- Tracks, vias
- 438, 75
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Mar 2018
- Updated
- 8 May 2018
Overview
Router is an open-source printed circuit board by laser-game, from the laser-game/router-hw repository on GitHub. It is a 2-layer board of 83 × 43 mm with 62 parts on 92 nets, routed with 438 tracks and 75 vias.
It is built around the CP2102, USBLC6-2SC6 and ABM7-8.000MHZ-D2Y-T, with the PGB1010603MR among its other parts. Its parts include 21 capacitors, 12 resistors, 10 diodes, 5 ICs and 4 connectors. It belongs with the STM32 boards of this library.
Main components
4CP2102
-Non-isolated TYPE-A UART(TTL) USB2.0 - USB Conversion Modules ROHSAi-ThinkerUSB Conversion ModulesUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)ABM7-8.000MHZ-D2Y-T
SMD6035-2P-40℃~+85℃ 100Ω 18pF 8MHz Crystal Oscillator ±20ppm ±30ppm SMD6035-2P Crystals ROHSAbraconCrystalsPGB1010603MR
0603-65℃~+125℃ 0.06pF 1 150V 24V Bidirectional ESD IEC 61000-4-2 0603 ESD and Surge Protection (TVS/ESD) ROHSLittelfuseESD And Surge Protection (TVS/ESD)
README
README.mdParts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4, C6, C7, C10, C11, C12, C13, C14, C15, C16, C17 |
| 9 | 330R | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5, R6, R7, R8, R9, R10 |
| 9 | LED | LED_SMD:LED_0805_2012Metric | D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 4 | 12p | Capacitor_SMD:C_0805_2012Metric | C18, C19, C20, C21 |
| 4 | 1u/50V | Capacitor_SMD:C_0805_2012Metric | C1, C5, C8, C9 |
| 4 | M3 | KLIB_Mechanical:Bolt_M3 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R11, R12 |
| 1 | ABM7-8.000MHZ-D2Y | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm_HandSoldering | Y1 |
| 1 | CP2102 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U4 |
| 1 | HM-TRP-869S | KLIB_RF_Module:HM-TRP-SMD | U3 |
| 1 | IL3X2-HX5F12.5-32.768KHZ | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm_HandSoldering | Y2 |
| 1 | LOGO | KLIB_Logo:wykys_skill | G*** |
| 1 | MCP1826S | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | PGB1010603MR | Diode_SMD:D_0603_1608Metric | D1 |
| 1 | SMA | Connector_Coaxial:SMA_Jack_Vertical | J2 |
| 1 | STM32F405RGTx | Package_QFP:TQFP-64_10x10mm_P0.5mm | U5 |
| 1 | SWD_01X04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | UART_01X03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_B | Connector_USB:USB_B_TE_5787834_Vertical | J1 |
The 59 most common of 62 parts.
Similar boards
- 4 layers60 × 60 mm

- 6 layers75 × 75 mm

Stm32h7-sdram-2layer
northernpaws/stm32h7-sdram-2layer
KiCad template for a TSOP-54 16M SDRAM routed to an LQFP-144 STM32H7 on two layers
31 parts1CERN-OHL-P-2.0 - 2 layers115 × 85.1 mm

ELV1 revision
omerikinci/ELV1
Elektronik kör yük (electronic dummy load) cihazının ilk stabil versiyonu. 150 W ile sınırlandırılmış, 30 V / 10 A aralığını destekler.
228 parts - 4 layers95.5 × 126 mm

TTF CX
dermatoid-collab/EVC_FW
Progetto hardware e firmware del sistema di controllo di un ascensore domestico a trazione (TTF) di LiftingItalia s.r.l. Quattro schede basate su STM32F446, collegate in CAN; il motore è comandato da un VFD.
242 parts - 2 layers140 × 100 mm

- 2 layers60 × 36 mm

- 2 layers30 × 13.7 mm

PTT USB Cable
UT8IFG/PTT-USB-Cable
A simple galvanically isolated USB-PTT interface for amateur radio equipment
25 parts2MIT - 2 layers25.7 × 76 mm

Telemetry
CanGulmez/EV-Control-System
Linux based EV Control System developed for BeagleBone Black Rev C
16 partsMIT
Questions
How big is the Router PCB?
It measures 83 × 43 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Router use?
62 parts, built around the CP2102, USBLC6-2SC6, ABM7-8.000MHZ-D2Y-T and PGB1010603MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Router KiCad files?
From the laser-game/router-hw repository on GitHub, at the commit this page was made from: the board is hw/router.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Router design in my own project?
Its repository states no licence, so its author keeps all rights: ask laser-game before reusing the design.