

OpenDeck v0
OpenDeck-RP2040-v0 is a DIY 9-key macro pad prototype inspired by the Elgato Stream Deck, built around the Seeed XIAO RP2040.
- Size
- 86.1 × 121.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 46
- Pads
- 136
- Tracks, vias
- 515, 49
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Mar 2026
- Updated
- 3 Mar 2026
Overview
OpenDeck v0 is an open-source printed circuit board by Bugatsec, from the Bugatsec/OpenDeck-RP2040-v0 repository on GitHub, published under the MIT licence. It is a 2-layer board of 86.1 × 121.7 mm with 32 parts on 46 nets, routed with 515 tracks and 49 vias.
It is built around the PCF8574AP and 74HC595. Its parts include 11 resistors, 9 diodes, 9 switches and 3 ICs. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
2PCF8574AP
DIP-16-40℃~+85℃ 100kHz 10uA 2.5V~6V 25mA 300uA 8 8 Cascade and address expansion、Built-in LED driver I2C Interrupt Output Quasi-bidirectional output DIP-16 I/O Expanders ROHSHGSEMII/O Expanders74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers
README
README.mdOpenDeck-RP2040-v0
OpenDeck-RP2040-v0 is an early hardware prototype of a DIY macro pad inspired by the Elgato Stream Deck.
This project represents my first-ever hardware design, created as a learning experiment using KiCad with no prior background in electronics or PCB design.
Project Overview
The goal of this project was to explore the fundamentals of hardware design, including schematic capture, PCB layout, and basic I/O expansion using a microcontroller.
At the time of creation(2025), I had no formal knowledge of electronics. I downloaded KiCad, had the concept of a Stream Deck–style device in mind, and designed this board through experimentation and self-learning. The result is a functional concept design rather than a finished or production-ready product.
Hardware Summary
- Microcontroller: Seeed XIAO RP2040
- Button input expansion: PCF8574 (I²C I/O expander)
- LED output expansion: 74HC595 (shift register)
- Inputs: 9 tactile push buttons
- Outputs: 9 individual LED indicators
- Interface: USB (via RP2040)
Design Files & Visuals
Schematic
PCB Layout
3D Render
Repository Contents
- KiCad schematic and PCB files
- Custom symbols, footprints, and 3D models
- Project documentation
- No finalized firmware
- No enclosure or mechanical design
Project Status
Status: Incomplete / Prototype (v0)
- Firmware was never completed
- Hardware was not extensively tested
- Design was not revised after the initial version
- This version is considered frozen
I may revisit this concept in the future. Any continued development or improvements will be done in a separate repository (v2).
This repository will remain unchanged as an archive of the original prototype.
Motivation
This project was inspired by the Elgato Stream Deck.
It was created purely as a learning exercise to understand how an idea could be translated into a real PCB using KiCad, without prior experience in hardware design.
The intent was exploration, not perfection.
Disclaimer
This design is experimental and provided for reference purposes only.
It is not guaranteed to function as intended and is not suitable for production use.
License
This project is licensed under the MIT License.
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11 |
| 9 | L08R5000Q1 | footprints:LEDRD254W57D500H1070 | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 9 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H9.5mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 1 | 74HC595 | Package_DIP:DIP-16_W7.62mm | U3 |
| 1 | PCF8574AP | Package_DIP:DIP-16_W7.62mm | U2 |
| 1 | XIAO-RP2040-DIP | footprints:XIAO-RP2040-DIP | U1 |
Similar boards
- 2 layers151 × 90.9 mm

- 2 layers79.5 × 160 mm

Europi main
AudioMorphology/Europi
Opensource sequencer software for Raspberry Pi equipped with Eurorack-compatible hardware
90 parts103 - 2 layers77.7 × 166.3 mm

Delta pico
AaronC81/delta-pico
Powerful scientific calculator based on the Raspberry Pi Pico
84 parts57MIT - 2 layers36 × 36 mm

- 2 layers50.8 × 74.9 mm

- 2 layers65 × 56 mm

MiniTeleskop
cutec-chris/PiScope
Goto Telescope with Raspberry PI HQ Camera and exchangable Objective Holders for DSLR Objectives
41 parts3 - 2 layers50.4 × 50.4 mm

Bluepill ethernet
kellerkindt/bluepill_sensor
Bluepill stm31f103 ethernet sensor extension board with SW written in Rust
47 parts3Apache-2.0 - 2 layers126 × 59.5 mm

VFO BFO Si5351
loscorpione/VFO-BFO-HF-ESP32-Si5351
VFO & BFO con Si 5351 gestito da ESP32 devkit V1 per la gamma di frequenze HF, da 1 a 30 MHZ
34 parts3
Questions
How big is the OpenDeck v0 PCB?
It measures 86.1 × 121.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OpenDeck v0 use?
32 parts, built around the PCF8574AP and 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OpenDeck v0 KiCad files?
From the Bugatsec/OpenDeck-RP2040-v0 repository on GitHub, at the commit this page was made from: the board is OpenDeck-v0.kicad_pcb and its schematic OpenDeck-v0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the OpenDeck v0 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).