

Scamp++
32 bit version of jes's scamp-cpu
- Size
- 160 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 132
- Nets
- 326
- Pads
- 1,011
- Tracks, vias
- 3, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 10 Sep 2026
- Updated
- 10 Oct 2026
Overview
Scamp++ is an open-source printed circuit board by BenskiBoy, from the BenskiBoy/scamp-32 repository on GitHub. It is a 2-layer board of 160 × 100 mm with 132 parts on 326 nets, routed with 3 tracks and 0 vias.
It is built around the 74ACT244SC, 74ACT08SC and 74ACT377PC, with the 74ACT157PC, 74ACT32PC and 74ACT02M among its other parts. Its parts include 44 capacitors, 44 ICs, 12 resistors, 12 diodes and 4 connectors.
Main components
674ACT244SC
SOIC-20-300mil-40℃~+85℃ 2 24mA 24mA 4.5V~5.5V 40uA 74ACT 7ns@5V,50pF 8 Bidirectional Output enable Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSonsemiBuffers, Drivers, Receivers, Transceivers74ACT08SC
SOIC-14-40℃~+85℃ 2 24mA 24mA 2V 3.76V、4.76V 4 4.5V~5.5V 440mV 4uA 74ACT Series 800mV 9ns@5V,50pF AND Gate SOIC-14 Logic Gates ROHSonsemiLogic Gates74ACT377PC
PDIP-20-40℃~+85℃ 1 10ns@5V,50pF 175MHz 1ns 24mA 24mA 4.5V~5.5V 4.5ns 4.5pF 40uA 74ACT Series 8 D-Type Rising Edge Tri-State PDIP-20 Flip Flops ROHSonsemiFlip Flops74ACT157PC
PDIP-16-40℃~+85℃ 24mA 24mA 4.5V~5.5V 4uA 5.5ns@5V,50pF 74ACT Single Supply PDIP-16 Signal Switches, Multiplexers, Decoders ROHSonsemiSignal Switches, Multiplexers, Decoders74ACT32PC
DIP-14-40℃~+85℃ 2 24mA 24mA 2V 3.76V、4.76V 4 4.5V~5.5V 440mV 4uA 74ACT Series 800mV 9ns@5V,50pF OR Gate TTL Compatible CMOS DIP-14 Logic Gates ROHSonsemiLogic Gates74ACT02M
SOIC-14SOIC-14 Specialty Logic ROHSSTMicroelectronicsSpecialty Logic
Parts
132| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +28 |
| 16 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10, JP11, JP12, JP13, JP14, JP15, JP16 |
| 12 | 2.2K | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 12 | 74ACT08 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U13, U14, U15, U16, U21, U22, U29, U30, U31, U32, U37, U38 |
| 12 | 74ACT86 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U17, U18, U19, U20, U23, U28, U33, U34, U35, U36, U39, U44 |
| 12 | LED | LED_SMD:LED_0603_1608Metric | D1, D4, D9, D10, D11, D12, EX, EY, NX, NY, XI, YI |
| 5 | 74ACT377 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U1, U2, U5, U6, U12 |
| 4 | 74ACT157 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U26, U27, U42, U43 |
| 4 | 74ACT283 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U24, U25, U40, U41 |
| 4 | 74ACT32 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U7, U8, U9, U10 |
| 2 | 74ACT244 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U3, U4 |
| 1 | 74ACT02 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U11 |
| 1 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_02x25_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x25_P2.54mm_Horizontal | J1 |
| 1 | DIN41612_03x32_C_Split | Connector_DIN:DIN41612_C_3x32_Male_Horizontal_THT | J4 |
More from BenskiBoy/scamp-32
4- 4 layers100 × 160 mm

- 2 layers

- 4 layers100 × 160 mm

- 4 layers100 × 160 mm

Similar boards
- 2 layers84 × 89 mm

14MHz Accelerator V2 2
Mathesar/14mhz-accelerator
14MHz 68000 accelerator with 1MB fast ram for amiga 500
42 parts78 - 2 layers65.5 × 58.4 mm

- 2 layers100 × 99.8 mm

07 alu
tmarhguy/tomato
A functional 32-bit computer built from scratch in a dorm; implemented on FPGA, Kicad, browser simulation
134 parts2 - 2 layers56.6 × 57.7 mm

TashTwenty Tiny
lampmerchant/tashtwenty
An interface for the DCD protocol used by Apple's Hard Disk 20.
31 parts35GPL-3.0 - 2 layers25.4 × 68.6 mm

- 4 layers

6-Slot Backplane
transistorfet/retroverse
A collection of VME-based hardware and software for modular computers
136 parts17 - 4 layers401.3 × 203.2 mm

Cpu010
thorpej/pg68k
The 68k Playground, a 680x0-based home-brew computer with multiple CPU options
272 parts15 - 4 layers253 × 169.1 mm

Questions
How big is the Scamp++ PCB?
It measures 160 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Scamp++ use?
132 parts, built around the 74ACT244SC, 74ACT08SC, 74ACT377PC and 74ACT157PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Scamp++ KiCad files?
From the BenskiBoy/scamp-32 repository on GitHub, at the commit this page was made from: the board is kicad/scamp-plus/scamp++.kicad_pcb and its schematic kicad/scamp-plus/ALU_1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Scamp++ design in my own project?
Its repository states no licence, so its author keeps all rights: ask BenskiBoy before reusing the design.