2 layers78.5 × 100 mm
DAQ Rev 2
ikmitche/OSHE-RecycleBot
The Home of the Open Source Hardware Enterprise's RecycleBot Project
43 parts
2 layers73.7 × 83.8 mm
Frontcontroller
ASURacingTeam/Formula-17-Class-1-Front-Controller-Arduino- Size
- 73.7 × 83.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 69
- Pads
- 161
- Tracks, vias
- 371, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 9 Sep 2017
- Updated
- 26 Sep 2017
Overview
Frontcontroller is an open-source printed circuit board by ASURacingTeam, from the ASURacingTeam/Formula-17-Class-1-Front-Controller-Arduino repository on GitHub. It is a 2-layer board of 73.7 × 83.8 mm with 26 parts on 69 nets, routed with 371 tracks and 0 vias.
It is built around the ATMEGA32-16PU, MCP2551-I/P and LM7805, with the MCP2515-E/P among its other parts. Its parts include 8 capacitors, 7 resistors, 5 connectors, 4 ICs and 2 crystals. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4
ATMEGA32-16PU
PDIP-40-40℃~+85℃ 10bit 16MHz 1KB 2KB 32 32KB 4.5V~5.5V 8 Bit AVR Built-in FLASH PDIP-40 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
MCP2551-I/P
PDIP-8-40℃~+85℃ 1Mbps 365uA 4.5V~5.5V 75mA CAN Transceiver PDIP-8 CAN Transceivers ROHSMicrochip TechnologyCAN Transceivers
LM7805
TO-2630℃~+125℃ 1 1A 20V 2V 42uV 5V 62dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MCP2515-E/P
PDIP-18-40℃~+125℃ 1Mbps 1uA 2.7V~5.5V 5mA CAN Controller SPI PDIP-18 CAN Controllers ROHSMicrochip TechnologyCAN Controllers
README
README.mdASU Racing Team Formula Students 2017 Class 1 Sensor Data Acquisition Module
Uses an Atmega32 microcontroller with the Arduino Environment and FreeRTOS to read 4 suspension travel sensors, a steering position sensor, a speed sensor and MPU9250 IMU
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | R | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R0, R1, R2, R3, R4, R5, R6 |
| 6 | C | Capacitors_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C2, C3, C5, C7, C8 |
| 2 | CONN_01X10 | Pin_Headers:Pin_Header_Straight_1x10_Pitch2.54mm | J2, J5 |
| 2 | CONN_01X16 | Pin_Headers:Pin_Header_Straight_1x16_Pitch2.54mm | J1, J3 |
| 2 | CP | Capacitors_THT:CP_Radial_D8.0mm_P3.50mm | C4, C6 |
| 2 | Crystal | Crystals:Crystal_HC49-U_Vertical | Y1, Y2 |
| 1 | ATMEGA32-16PU | Housings_DIP:DIP-40_W15.24mm | U1 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | J4 |
| 1 | LM7805 | TO_SOT_Packages_THT:TO-220_Vertical | U2 |
| 1 | MCP2515-E/P | Housings_DIP:DIP-18_W7.62mm_Socket | U4 |
| 1 | MCP2551-I/P | Housings_DIP:DIP-8_W7.62mm_Socket | U3 |
Similar boards
- 2 layers119.4 × 88.9 mm
USB MidiController
derrudi187/USB-MidiController
MidiController based on Atmel with V-USB powered by http://www.obdev.at/vusb/
31 partsGPL-3.0 - 2 layers100 × 80 mm
ATmega32 EEPROM Storage
DINHO365/ATmega32_EEPROM_Data_Storage
Demonstrates internal EEPROM read/write on the ATmega32 by letting a user increment/decrement a value in RAM, save it to EEPROM, read it back, clear it, and recover it after reset or a power cycle.
26 parts - 2 layers189.2 × 124.5 mm
- 2 layers
ATMEGA 32 1
ernest-czachorowski/Flood-Sensors-KiCad-Files
This repository contains KiCad files for my master's thesis IoT infrastructure, which includes water leak detection sensors.
74 partsMIT - 2 layers89.5 × 56.5 mm
- 2 layers149.9 × 106.7 mm
- 2 layers168.5 × 160.6 mm
AUTOMATIC LIGHT SENSOR
josbertbaingana2002-bot/ATmega32_LDR_Automatic_Lighting
Automatic Lighting System using ATmega32, LDR, KiCad and SimulIDE
29 parts
Questions
How big is the Frontcontroller PCB?
It measures 73.7 × 83.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Frontcontroller use?
26 parts, built around the ATMEGA32-16PU, MCP2551-I/P, LM7805 and MCP2515-E/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Frontcontroller KiCad files?
From the ASURacingTeam/Formula-17-Class-1-Front-Controller-Arduino repository on GitHub, at the commit this page was made from: the board is pcb/frontcontroller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Frontcontroller design in my own project?
Its repository states no licence, so its author keeps all rights: ask ASURacingTeam before reusing the design.