2 layers73.7 × 83.8 mm
2 layers89.5 × 56.5 mm
ATmega Project
ExzyteTheDude/ATmega32_Output_Compare_Wavefom_Generator- Size
- 89.5 × 56.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 41
- Pads
- 86
- Tracks, vias
- 113, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 1 Jul 2026
- Updated
- 6 Jul 2026
Overview
ATmega Project is an open-source printed circuit board by ExzyteTheDude, from the ExzyteTheDude/ATmega32_Output_Compare_Wavefom_Generator repository on GitHub. It is a 2-layer board of 89.5 × 56.5 mm with 20 parts on 41 nets, routed with 113 tracks and 0 vias.
It is built around the ATMEGA32-16PU. Its parts include 7 resistors, 4 switches, 3 capacitors, 3 diodes and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 4 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4 |
| 3 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6, R7 |
| 3 | LED | LED_THT:LED_D5.0mm | D1, D2, D3 |
| 2 | 22pf | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 1 | 100nf | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3 |
| 1 | 8 MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | ATmega32-16P | Package_DIP:DIP-40_W15.24mm | U1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
Similar boards
- 2 layers119.4 × 88.9 mm
USB MidiController
derrudi187/USB-MidiController
MidiController based on Atmel with V-USB powered by http://www.obdev.at/vusb/
31 partsGPL-3.0 - 2 layers100 × 80 mm
ATmega32 EEPROM Storage
DINHO365/ATmega32_EEPROM_Data_Storage
Demonstrates internal EEPROM read/write on the ATmega32 by letting a user increment/decrement a value in RAM, save it to EEPROM, read it back, clear it, and recover it after reset or a power cycle.
26 parts - 2 layers189.2 × 124.5 mm
- 2 layers
ATMEGA 32 1
ernest-czachorowski/Flood-Sensors-KiCad-Files
This repository contains KiCad files for my master's thesis IoT infrastructure, which includes water leak detection sensors.
74 partsMIT - 2 layers149.9 × 106.7 mm
- 2 layers168.5 × 160.6 mm
AUTOMATIC LIGHT SENSOR
josbertbaingana2002-bot/ATmega32_LDR_Automatic_Lighting
Automatic Lighting System using ATmega32, LDR, KiCad and SimulIDE
29 parts - 2 layers100 × 100 mm
Questions
How big is the ATmega Project PCB?
It measures 89.5 × 56.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ATmega Project use?
20 parts, built around the ATMEGA32-16PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ATmega Project KiCad files?
From the ExzyteTheDude/ATmega32_Output_Compare_Wavefom_Generator repository on GitHub, at the commit this page was made from: the board is kicad/ATmega_Project.kicad_pcb and its schematic kicad/ATmega_Project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ATmega Project design in my own project?
Its repository states no licence, so its author keeps all rights: ask ExzyteTheDude before reusing the design.