Skip to the content
2 layers168.5 × 160.6 mmAUTOMATIC LIGHT SENSOR, the printed circuit board in 3D

Automatic Lighting System using ATmega32, LDR, KiCad and SimulIDE

Size
168.5 × 160.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
54
Pads
124
Tracks, vias
294, 16
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
1 Jul 2026
Updated
14 Jul 2026

Overview

AUTOMATIC LIGHT SENSOR is an open-source printed circuit board by josbertbaingana2002-bot, from the josbertbaingana2002-bot/ATmega32_LDR_Automatic_Lighting repository on GitHub. It is a 2-layer board of 168.5 × 160.6 mm with 29 parts on 54 nets, routed with 294 tracks and 16 vias.

It is built around the ATMEGA32-16PU and BC547. Its parts include 11 resistors, 5 capacitors, 4 diodes, 3 switches and 2 transistors. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

ATmega32_LDR_Automatic_Lighting

Automatic Lighting System using ATmega32, LDR, KiCad and SimulIDE

Parts

29
QtyValueFootprintReferences
410kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R9, R11
4220Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R4, R6, R10
3100nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC3, C4, C6
21kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR7, R8
222pFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC1, C2
2BC547Package_TO_SOT_THT:TO-92_InlineQ1, Q2
2SW_PushButton_Switch_THT:SW_PUSH_6mmSW1, SW2
116MHzCrystal:Crystal_HC49-U_VerticalY1
1ATmega32-16PPackage_DIP:DIP-40_W15.24mmU1
1BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
1GreenLED_THT:LED_D5.0mmD1
1LDR03OptoDevice:R_LDR_10x8.5mm_P7.6mm_VerticalR5
1LEDLED_THT:LED_D5.0mmD4
1RedLED_THT:LED_D5.0mmD3
1Relay_SPDTRelay_THT:Relay_SPDT_CUI_SR5K1
1WC1602ADisplay:WC1602ADS1
1YellowLED_THT:LED_D5.0mmD2

Similar boards

  • 2 layers73.7 × 83.8 mmFrontcontroller, the printed circuit board in 3D

    Frontcontroller

    ASURacingTeam/Formula-17-Class-1-Front-Controller-Arduino

    26 parts
  • 2 layers119.4 × 88.9 mmUSB MidiController, the printed circuit board in 3D

    USB MidiController

    derrudi187/USB-MidiController

    MidiController based on Atmel with V-USB powered by http://www.obdev.at/vusb/

    31 partsGPL-3.0
  • 2 layers100 × 80 mmATmega32 EEPROM Storage, the printed circuit board in 3D

    ATmega32 EEPROM Storage

    DINHO365/ATmega32_EEPROM_Data_Storage

    Demonstrates internal EEPROM read/write on the ATmega32 by letting a user increment/decrement a value in RAM, save it to EEPROM, read it back, clear it, and recover it after reset or a power cycle.

    26 parts
  • 2 layers189.2 × 124.5 mmSleipner, the printed circuit board in 3D

    Sleipner

    ekdennisek/gjallarhorn-sleipner

    A Eurorack compatible step sequencer

    129 partsGPL-3.0
  • 2 layersATMEGA 32 1, the printed circuit board in 3D

    ATMEGA 32 1

    ernest-czachorowski/Flood-Sensors-KiCad-Files

    This repository contains KiCad files for my master's thesis IoT infrastructure, which includes water leak detection sensors.

    74 partsMIT
  • 2 layers89.5 × 56.5 mmATmega Project, the printed circuit board in 3D

    ATmega Project

    ExzyteTheDude/ATmega32_Output_Compare_Wavefom_Generator

    20 parts
  • 2 layers149.9 × 106.7 mmCamera Stand, the printed circuit board in 3D

    Camera Stand

    hansajayathilaka/L1-Hardware-Project

    Level 1 hardware project robot

    40 parts
  • 2 layers100 × 100 mmDevelopmentBoard, the printed circuit board in 3D

    DevelopmentBoard

    kernlpanic/devboard

    pcb design for a small devboard with ethernet and rs232

    59 parts

Questions

How big is the AUTOMATIC LIGHT SENSOR PCB?

It measures 168.5 × 160.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the AUTOMATIC LIGHT SENSOR use?

29 parts, built around the ATMEGA32-16PU and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AUTOMATIC LIGHT SENSOR KiCad files?

From the josbertbaingana2002-bot/ATmega32_LDR_Automatic_Lighting repository on GitHub, at the commit this page was made from: the board is KICAD1/AUTOMATIC LIGHT SENSOR.kicad_pcb and its schematic KICAD1/AUTOMATIC LIGHT SENSOR.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AUTOMATIC LIGHT SENSOR design in my own project?

Its repository states no licence, so its author keeps all rights: ask josbertbaingana2002-bot before reusing the design.