
MCP2515-E/P
Microchip TechnologyExtended
-40℃~+125℃ 1Mbps 1uA 2.7V~5.5V 5mA CAN Controller SPI PDIP-18 CAN Controllers ROHS
- Part id
- microchip/MCP2515-E/P
- Category
- CAN Controllers
- Package
- PDIP-18
- Pins
- 18
- In stock
- 0 at JLCPCB (C646751)
- Used on
- 2 open-source boards
Overview
The MCP2515-E/P is a CAN Controller made by Microchip Technology in a PDIP-18 package with 18 pins. -40℃~+125℃ 1Mbps 1uA 2.7V~5.5V 5mA CAN Controller SPI PDIP-18 CAN Controllers ROHS.
PCBKit's library has its KiCad symbol (tinkerforge:MCP2515, from Tinkerforge) and its footprint (Package_DIP:DIP-18_W7.62mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C646751). 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
Pinout
18| Pin | Name | Type |
|---|---|---|
| 1 | TXCAN | Passive |
| 2 | RXCAN | Passive |
| 3 | CLKOUT | Passive |
| 4 | TX0RTS | Passive |
| 5 | TX1RTS | Passive |
| 6 | TX2RTS | Passive |
| 7 | OSC2 | Passive |
| 8 | OSC1 | Passive |
| 9 | VSS | Passive |
| 10 | RX1BF | Passive |
| 11 | RX0BF | Passive |
| 12 | INT | Passive |
| 13 | SCK | Passive |
| 14 | SI | Passive |
| 15 | SO | Passive |
| 16 | nCS | Passive |
| 17 | nRESET | Passive |
| 18 | VDD | Passive |
Open-source boards using it
2- 2 layers73.7 × 83.8 mm

- 2 layers78.5 × 100 mm

DAQ Rev 2
ikmitche/OSHE-RecycleBot
The Home of the Open Source Hardware Enterprise's RecycleBot Project
43 parts
Parts like it
3MCP2510-I/P
PDIP-18-40℃~+85℃ 10uA 1Mbps 3V~5.5V 5mA CAN Controller SPI PDIP-18 CAN Controllers ROHSMicrochip TechnologyCAN ControllersMCP2515-I/P
PDIP-18-40℃~+85℃ 1Mbps 1uA 2.7V~5.5V 5mA CAN Controller SPI PDIP-18 CAN Controllers ROHSMicrochip TechnologyCAN ControllersMCP2510-E/P
PDIP-18-40℃~+125℃ 1Mbps 3V~5.5V 5mA CAN Controller PDIP-18 CAN Controllers ROHSMicrochip TechnologyCAN Controllers
Questions
Is there a KiCad symbol and footprint for the MCP2515-E/P?
Yes. The symbol is tinkerforge:MCP2515 and the footprint Package_DIP:DIP-18_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MCP2515-E/P?
PDIP-18, with 18 pins. Its footprint is drawn on this page.
Where is the MCP2515-E/P datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the MCP2515-E/P?
JLCPCB lists it as part C646751, with 0 in stock; the sellers' links on this page open their listings.
What can replace the MCP2515-E/P?
Parts like it in the library: the MCP2510-I/P by Microchip Technology, the MCP2515-I/P by Microchip Technology and the MCP2510-E/P by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MCP2515-E/P?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.