986-Studio/FelinaePurr1FelinæPurr is a USB compatible COMLynx device.
FelinaePurr is an open-source printed circuit board by 986-Studio, from the 986-Studio/FelinaePurr repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 38 × 18 mm with 27 parts on 33 nets, routed with 180 tracks and 23 vias.
It is built around the FT232RL and JUMPER3. Its parts include 9 resistors, 6 capacitors, 5 connectors, 4 diodes and 2 ICs.
README
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100 | Resistors_SMD:R_0603 | R1, R2, R3, R4, R5, R7, R8, R9 |
| 2 | 0.1u | Capacitors_SMD:C_0603 | C2, C3 |
| 2 | 100n | Capacitors_SMD:C_0603 | C1, C5 |
| 2 | MECANICAL | PadsLib:2mmHole | P4, P5 |
| 1 | 18K | Resistors_SMD:R_0603 | R6 |
| 1 | 330p | Capacitors_SMD:C_0603 | C4 |
| 1 | 4.7u | Capacitors_SMD:C_0603 | C6 |
| 1 | Blue | LEDs:LED-0805 | D3 |
| 1 | FT232RL | Housings_SSOP:SSOP-28_5.3x10.2mm_Pitch0.65mm | U1 |
| 1 | Green | LEDs:LED-0805 | D1 |
| 1 | JACK | PadsLib:JACK2.5 | P3 |
| 1 | JUMPER3 | Pin_Headers:Pin_Header_Straight_1x03 | JP1 |
| 1 | PCB | Pin_Headers:Pin_Header_Straight_1x03 | P2 |
| 1 | Red | LEDs:LED-0805 | D2 |
| 1 | SN74LVC1G125-Q1 | TO_SOT_Packages_SMD:SOT-23-5 | U2 |
| 1 | USB_A | PadsLib:MC32603_USB_A | P1 |
| 1 | Yellow | LEDs:LED-0805 | D4 |
matrixsmaster/doscard
DOSCARD is a DOS-in-a-box. This project contains two major parts: heavily modified DosBox fork as a software library, which can be embedded into any GUI or CLI application; and a set of embedded system projects which…
brandon-martinez/jgb
The microcontroller present on this board, and the software which runs on it should eventually be integrated into each node which must communicate via the CAN bus.
ParadigmHyperloop/electrical
All schematics and layouts in KiCad, plus some simulations
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
Teslafly/Dead-OpenBMS-dead
A scalable, open source battery management system
It measures 38 × 18 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the FT232RL and JUMPER3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the 986-Studio/FelinaePurr repository on GitHub, at the commit this page was made from: the board is FelinaePurr.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
