Skip to the content
12345678

UCC27211D

Texas InstrumentsExtended

-40℃~+140℃ 1.3V~2.1V 1.9V~2.8V 17ns 18ns 2 4A 4A 5.5ns 7.2ns 85uA 8V~17V Half-Bridge MOSFET Under Voltage Protection SOIC-8 Gate Drivers ROHS

Part id
ti/UCC27211D
Category
Gate Drivers
Package
SOIC-8
Pins
8
In stock
1,732 at JLCPCB (C2871979)
Used on
11 open-source boards

Overview

The UCC27211D is a gate Driver made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+140℃ 1.3V~2.1V 1.9V~2.8V 17ns 18ns 2 4A 4A 5.5ns 7.2ns 85uA 8V~17V Half-Bridge MOSFET Under Voltage Protection SOIC-8 Gate Drivers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ISL2101AABZ, from EasyEDA) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 1,732 are in stock at JLCPCB (part C2871979). 11 open-source boards in 10 repositories on GitHub use it.

Symbol

1VDD2HB3HO4HS5HI6LI7VSS8LO
EasyEDA_Cloud:ISL2101AABZFrom EasyEDA

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

11
Supply, least
8 V · VDD, recommended operating minimum · p. 6
Supply, most
17 V · VDD, recommended operating maximum · p. 6
Supply, absolute maximum
20 V · VDD and VHB-VHS, absolute maximum · p. 5
Works from
-40 °C · rated operating temperature minimum · p. 1
Works up to
140 °C · rated operating temperature maximum · p. 1
Junction, hottest
150 °C · virtual junction temperature absolute maximum · p. 5
Takes working
5.07 mA · sum of typical VDD, boot and HB-to-VSS operating currents, 500 kHz, no load · p. 7
Junction to air (D)
111.8 K/W · junction-to-ambient thermal resistance · p. 6
Junction to case (D)
56.9 K/W · junction-to-case top thermal resistance · p. 6
Junction to board (D)
53 K/W · junction-to-board thermal resistance · p. 6
Edge
5.5 ns · typical LO fall time, 1000 pF, 90% to 10% · p. 8

What it is and has

4
Peak output current
4A sink, 4A source · p. 1
Pull-up and pull-down resistance
0.9Ω · p. 1
Protection
Symmetrical undervoltage lockout for high-side and low-side drivers · p. 1
Bootstrap diode
Integrated; external bootstrap capacitor required · p. 5

Around it

3
cap 0.22 µF to 4.7 µF
between VDD and VSS; Supply decoupling; upper capacitance range recommended for cold temperature applications. · p. 5
cap 0.022 µF to 0.1 µF
between HB and HS; Required external bootstrap capacitor; positive side to HB. Select for high-side MOSFET gate charge, speed and ripple. · p. 5
cap 1 nF to 10 nF
between HI and VSS; Add when input source impedance exceeds 100 Ω; select for input noise. · p. 5

Specifications

63
ParameterConditionsAs printedPage
Supply voltage range VDD, VHB - VHSOver operating free-air temperature rangemin -0.3 · max 20 V5
Input voltages on LI and HI VLI, VHIOver operating free-air temperature rangemin -10 · max 20 V5
Output voltage on LO VLODC; maximum VDD + 0.3 Vmin -0.3 V5
Output voltage on LO VLORepetitive pulse <100 ns; maximum VDD + 0.3 Vmin -2 V5
Voltage on HS VHSDCmin -1 · max 115 V5
Voltage on HS VHSRepetitive pulse <100 ns; minimum –(24 V-VDD)max 115 V5
Voltage on HB VHBmin -0.3 · max 120 V5
Operating virtual junction temperature TJmin -40 · max 150 °C5
Lead temperature (soldering, 10 sec.)Soldering, 10 sec.max 300 °C5
Storage temperature Tstgmin -65 · max 150 °C5
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±2000 Vmax 2000 V6
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; ±1000 Vmax 1000 V6
Supply voltage range VDD, VHB-VHSVoltages with respect to VSSmin 8 · typ 12 · max 17 V6
Voltage on HS VHSmin -1 · max 105 V6
Voltage on HS VHSRepetitive pulse <100 ns; minimum –(24V-VDD)max 110 V6
Voltage slew rate on HSmax 50 V/ns6
Operating junction temperature rangemin -40 · max 140 °C6
Junction-to-ambient thermal resistance θJAD, 8 PINStyp 111.8 °C/W6
Junction-to-case (top) thermal resistance θJCtopD, 8 PINStyp 56.9 °C/W6
Junction-to-board thermal resistance θJBD, 8 PINStyp 53 °C/W6
Junction-to-top characterization parameter ψJTD, 8 PINStyp 7.8 °C/W6
Junction-to-board characterization parameter ψJBD, 8 PINStyp 52.3 °C/W6
VDD quiescent current IDDVDD = VHB = 12 V, VHS = VSS = 0 V; V(LI) = V(HI) = 0 V; no loadmin 0.05 · typ 0.085 · max 0.17 mA7
VDD operating current IDDOUCC27211; VDD = VHB = 12 V, VHS = VSS = 0 V; f = 500 kHz, CLOAD = 0typ 2.5 · max 5.2 mA7
Boot voltage quiescent current IHBVDD = VHB = 12 V, VHS = VSS = 0 V; V(LI) = V(HI) = 0 V; no loadmin 0.015 · typ 0.065 · max 0.1 mA7
Boot voltage operating current IHBOVDD = VHB = 12 V, VHS = VSS = 0 V; f = 500 kHz, CLOAD = 0typ 2.5 · max 5 mA7
HB to VSS quiescent current IHBSV(HS) = V(HB) = 115 Vtyp 0.0005 · max 1 uA7
HB to VSS operating current IHBSOf = 500 kHz, CLOAD = 0typ 0.07 · max 1.2 mA7
Input voltage threshold VHITUCC27211, D packagemin 1.9 · typ 2.3 · max 2.7 V7
Input voltage threshold VLITUCC27211, D packagemin 1.3 · typ 1.6 · max 1.9 V7
Input voltage hysteresis VIHYSUCC27211typ 700 mV7
Input pulldown resistance RINUCC27211typ 68 kΩ7
VDD turnon threshold VDDRD packagemin 6.2 · typ 7 · max 7.8 V7
Hysteresis VDDHYSVDD undervoltage lockouttyp 0.5 V7
VHB turnon threshold VHBRD packagemin 5.6 · typ 6.7 · max 7.9 V7
Hysteresis VHBHYSVHB undervoltage lockouttyp 1.1 V7
Low-current forward voltage VFIVDD-HB = 100 uAtyp 0.65 · max 0.8 V7
High-current forward voltage VFIIVDD-HB = 100 mAtyp 0.85 · max 0.95 V7
Dynamic resistance, ΔVF/ΔI RDIVDD-HB = 100 mA and 80 mAmin 0.3 · typ 0.5 · max 0.85 Ω7
Low-level output voltage VLOLLO gate driver; ILO = 100 mAmin 0.05 · typ 0.09 · max 0.19 V7
High level output voltage VLOHLO gate driver; ILO = -100 mA, VLOH = VDD - VLOmin 0.1 · typ 0.16 · max 0.29 V7
Peak pull-up currentLO gate driver; VLO = 0 V; ensured by designtyp 3.7 A7
Peak pull-down currentLO gate driver; VLO = 12 V; ensured by designtyp 4.5 A7
Low-level output voltage VHOLHO gate driver; IHO = 100 mAmin 0.05 · typ 0.09 · max 0.19 V7
High-level output voltage VHOHHO gate driver; IHO = -100 mA, VHOH = VHB - VHOmin 0.1 · typ 0.16 · max 0.29 V7
Peak pull-up currentHO gate driver; VHO = 0 V; ensured by designtyp 3.7 A7
Peak pull-down currentHO gate driver; VHO = 12 V; ensured by designtyp 4.5 A7
VLI falling to VLO falling TDLFFUCC27211, CLOAD = 0min 10 · typ 17 · max 30 ns8
VHI falling to VHO falling TDHFFUCC27211, CLOAD = 0min 10 · typ 17 · max 30 ns8
VLI rising to VLO rising TDLRRUCC27211, CLOAD = 0min 10 · typ 18 · max 40 ns8
VHI rising to VHO rising TDHRRUCC27211, CLOAD = 0min 10 · typ 18 · max 40 ns8
From HO OFF to LO ON TMONUCC27211; TJ = 25°Ctyp 2 · max 9.5 ns8
From HO OFF to LO ON TMONUCC27211; TJ = –40°C to 140°Ctyp 2 · max 14 ns8
From LO OFF to HO ON TMOFFUCC27211; TJ = 25°Ctyp 2 · max 9.5 ns8
From LO OFF to HO ON TMOFFUCC27211; TJ = –40°C to 140°Ctyp 2 · max 14 ns8
LO rise time tRCLOAD = 1000 pF, from 10% to 90%typ 7.2 ns8
HO rise time tRCLOAD = 1000 pF, from 10% to 90%typ 7.2 ns8
LO fall time tFCLOAD = 1000 pF, from 90% to 10%typ 5.5 ns8
HO fall time tFCLOAD = 1000 pF, from 90% to 10%typ 5.5 ns8
LO, HO tRCLOAD = 0.1 uF, (3 V to 9 V)typ 0.36 · max 0.6 us8
LO, HO tFCLOAD = 0.1 uF, (9 V to 3 V)typ 0.15 · max 0.4 us8
Minimum input pulse width that changes the outputOver operating free-air temperature rangemax 50 ns8
Bootstrap diode turnoff timeIF = 20 mA, IREV = 0.5 A; typical at TA = 25°C; ensured by designtyp 20 ns8

Pins, by the datasheet

8
1 VDD
Positive supply to the lower-gate driver; decouple to VSS with 0.22 uF to 4.7 uF. · p. 5
2 HB
High-side bootstrap supply; connect the positive side of the required external bootstrap capacitor. · p. 5
3 HO
High-side output; connect to the gate of the high-side power MOSFET. · p. 5
4 HS
Connect to the high-side MOSFET source and the negative side of the bootstrap capacitor. · p. 5
5 HI
High-side input; connect to a low impedance signal source. · p. 5
6 LI
Low-side input; connect to a low impedance signal source. · p. 5
7 VSS
Negative supply terminal, generally grounded. · p. 5
8 LO
Low-side output; connect to the gate of the low-side power MOSFET. · p. 5

Open-source boards using it

11See all 11
  • 2 layers49 × 75 mmDuoDrive, the printed circuit board in 3D

    DuoDrive

    ManhTi3012/DuoDrive

    Duo closed-loop brushed motor driver

    115 parts10
  • 4 layers82 × 60 mmP1 tx, the printed circuit board in 3D

    P1 tx

    Deco025/resonare

    Resonare: open-source 120 W LCC-S resonant wireless charger, transmitter and receiver boards (KiCad 10, 4-layer)

    92 parts4CERN-OHL-S-2.0
  • 4 layers52.8 × 49.6 mmSynch buck digital, the printed circuit board in 3D

    Synch buck digital

    BenjaminMeyerEE/Digital-Synchronous-Buck-Converter

    12 V to 6 V, 10 A synchronous buck converter with closed-loop digital control on an STM32G474RET6. Custom 4-layer board in KiCad.

    49 parts3
  • 4 layers76 × 74.3 mmMCU PSU, the printed circuit board in 3D

    MCU PSU

    Blaze-Pascal/EKA-PiF-MCU_PSU

    2-phase synchronous digitally controlled buck converter (30V in, up to 10A out). Features a 4-layer custom KiCad PCB optimized for EMI.

    119 partsGPL-3.0
  • 4 layers50 × 70 mmFOC2, the printed circuit board in 3D

    FOC2

    IpinZhu/foc-esc

    这是一个基于 STM32G473RC 的实验性三相 PMSM/BLDC 电机控制平台。仓库包含驱动板设计,以及使用 Rust 2024 + Embassy 实现的电流控制型磁场定向控制(FOC)固件。

    124 partsMIT
  • 2 layers58.5 × 43.1 mmTorqController, the printed circuit board in 3D

    TorqController

    JoaoWMHentz/Kinematech_Torq

    135 parts
  • 2 layers54 × 40 mmSync buck, the printed circuit board in 3D

    Sync buck

    shonzinger-spec/ee-portfolio

    Electrical engineering portfolio: simulated and verified EE projects (firmware, SPICE, KiCad, Wokwi) by Shon Zinger

    37 partsMIT
  • 4 layers75 × 60 mmP1 rx, the printed circuit board in 3D

    P1 rx

    Deco025/resonare

    Resonare: open-source 120 W LCC-S resonant wireless charger, transmitter and receiver boards (KiCad 10, 4-layer)

    90 parts4CERN-OHL-S-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the UCC27211D?

Yes. The symbol is EasyEDA_Cloud:ISL2101AABZ and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the UCC27211D?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the UCC27211D datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the UCC27211D?

JLCPCB lists it as part C2871979, with 1,732 in stock; the sellers' links on this page open their listings.

What can replace the UCC27211D?

Parts like it in the library: the EG2131 by EG, the SLM2186CA-DG by Sillumin, the UCC27524D by Texas Instruments and the IR2104STRPBF by Infineon Technologies. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the UCC27211D?

11 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.