Skip to the content
12345678

TPS5420D

Texas InstrumentsExtended

-40℃~+125℃@(TJ) 1 1.22V~31V 2A 4.4mA 5.5V~36V 500kHz Adjustable Buck Buck Built-in No SOIC-8 DC-DC Converters ROHS

Part id
ti/TPS5420D
Category
DC DC Converters
Package
SOIC-8
Pins
8
In stock
4,567 at JLCPCB (C10111)
Used on
10 open-source boards

Overview

The TPS5420D is a DC DC Converter made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+125℃@(TJ) 1 1.22V~31V 2A 4.4mA 5.5V~36V 500kHz Adjustable Buck Buck Built-in No SOIC-8 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:TPS5420D, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 4,567 are in stock at JLCPCB (part C10111). 10 open-source boards in 8 repositories on GitHub use it.

Symbol

1BOOT4VSNS5ENA6GND7VIN8PH
Regulator_Switching:TPS5420DFrom KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the TPS5420D
PinNameType
1BOOTInput
2NCNot connected
3NCNot connected
4VSNSInput
5ENAInput
6GNDPower in
7VINPower in
8PHPower out

Open-source boards using it

10See all 10
  • 2 layers100 × 100 mmMotherboard, the printed circuit board in 3D

    Motherboard

    Brickteam-RO/tilting-maze

    STM32-powered real-time maze generator and solver built for the Robochallenge 2026 - Freestyle Showcase University competition

    95 parts4MIT
  • 2 layers92 × 95.9 mmSanket.old, the printed circuit board in 3D

    Sanket.old

    Anant713/Antenna-Deployment-System

    45 parts
  • 2 layers117.8 × 65.3 mmPdb aethrone, the printed circuit board in 3D

    Pdb aethrone

    anurag-2307/Drone_PDB

    Drone Power Distribtion Board

    36 parts
  • 2 layers53.6 × 35.6 mmPd board, the printed circuit board in 3D

    Pd board

    teleplayer123/PD_Logger

    The PD Logger firmware logs PD messages, attach/dettach events, CC voltage/orientation, and VBUS voltage. Connect to the board through UART and use a serial terminal to interact with the FUSB302 over I2C via the…

    49 partsMIT
  • 2 layers268 × 62 mmSmu front 1, the printed circuit board in 3D

    Smu front 1

    jaromir-sukuba/J-SMU

    DIY source-measure unit

    90 parts244
  • 2 layers137 × 62 mmSmu subfront 1, the printed circuit board in 3D

    Smu subfront 1

    jaromir-sukuba/J-SMU

    DIY source-measure unit

    66 parts244
  • 4 layers119.6 × 58.9 mmFmcw, the printed circuit board in 3D

    Fmcw

    matthuszagh/fmcw

    6GHz frequency-modulated continuous-wave radar with real-time range detection

    415 parts66Apache-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS5420D?

Yes. The symbol is Regulator_Switching:TPS5420D and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS5420D?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the TPS5420D datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS5420D?

JLCPCB lists it as part C10111, with 4,567 in stock; the sellers' links on this page open their listings.

What can replace the TPS5420D?

Parts like it in the library: the XL1509-5.0E1 by XLSEMI, the XL1509-ADJE1 by XLSEMI, the XL1410E1 by XLSEMI and the TPS54231D by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS5420D?

10 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.