
Daughterboard
Brickteam-RO/tilting-maze
STM32-powered real-time maze generator and solver built for the Robochallenge 2026 - Freestyle Showcase University competition

STM32-powered real-time maze generator and solver built for the Robochallenge 2026 - Freestyle Showcase University competition
Motherboard is an open-source printed circuit board by Brickteam-RO, from the Brickteam-RO/tilting-maze repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 95 parts on 89 nets, routed with 971 tracks and 421 vias.
It is built around the CH340C, TPS5420D and 74HC138, with the AMS1117-3.3, PCA9306D and M20-7820646 among its other parts. Its parts include 27 capacitors, 20 connectors, 19 resistors, 7 ICs and 4 switches. It belongs with the computers and single-board computers boards and the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C26 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R5, R6, R10, R11 |
| 7 | 10uF | Capacitor_SMD:C_0805_2012Metric | C17, C18, C20, C22, C24, C25, C27 |
| 6 | 5.1k | Resistor_SMD:R_0603_1608Metric | R7, R8, R13, R14, R15, R16 |
| 5 | M20-7820646 | KiCad:HDRV6W70P0X254_1X6_1564X250X850P | J7, J9, J11, J13, J15 |
| 5 | Terminal Block | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J19, J20, J21, J22, J23 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R17, R18 |
| 3 | B340 | Diode_SMD:D_SMC | D1, D2, D3 |
| 3 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H1, H3, H4 |
| 2 | 10nF | Capacitor_SMD:C_0603_1608Metric | C16, C21 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 20pF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 220uF | Capacitor_SMD:CP_Elec_6.3x5.4 | C19, C23 |
| 2 | 22uH | Inductor_SMD:L_Bourns_SRR1208_12.7x12.7mm | L1, L2 |
| 2 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Horizontal | J8, J10 |
| 2 | GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1, TP8 |
| 2 | TPS5420D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U4 |
| 1 | 0.5 | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 12V | TestPoint:TestPoint_Pad_2.0x2.0mm | TP7 |
| 1 | 30.9k | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 32.768KHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | 34.8k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_2.0x2.0mm | TP2 |
| 1 | 5V | TestPoint:TestPoint_Pad_2.0x2.0mm | TP3 |
| 1 | 5V5 | TestPoint:TestPoint_Pad_2.0x2.0mm | TP4 |
| 1 | 74HC138 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U7 |
| 1 | 8MHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | BOOT PIN HEADER | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | GEN_MAZE | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW2 |
| 1 | I2C_HEADER | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | KPJX-4S-S | KiCad1:KPJX4SS | J5 |
| 1 | PCA9306D | Package_SON:X2SON-8_1.4x1mm_P0.35mm | U6 |
| 1 | SOLVE_MAZE | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW4 |
| 1 | SPI_TEST | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J6 |
| 1 | ST-Link | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J2 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | STM_RST | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | TOGGLE_MAZE | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW3 |
| 1 | Terminal 1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J17 |
| 1 | Terminal 2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J18 |
| 1 | UART_RX | TestPoint:TestPoint_Pad_2.0x2.0mm | TP5 |
| 1 | UART_TX | TestPoint:TestPoint_Pad_2.0x2.0mm | TP6 |
| 1 | UART_USB | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |

Brickteam-RO/tilting-maze
STM32-powered real-time maze generator and solver built for the Robochallenge 2026 - Freestyle Showcase University competition

Brickteam-RO/tilting-maze
STM32-powered real-time maze generator and solver built for the Robochallenge 2026 - Freestyle Showcase University competition



Contrix/VUT_FIT_BP
Bakalářská práce na téma: Vestavěný systém pro monitorování výšky vodní hladiny

gustebeast/public-steel-guitar
A pedal steel guitar you can build yourself, from parts anyone can buy.

abeednaz/R56-Mini-MFD
Multi function display for R56 MINI Cooper


dmz006/brain-drain
Standalone four-bay (plus M.2) NIST 800-88 disk sanitizer: Raspberry Pi CM5 carrier board, Python service, 3D-printed enclosure

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
95 parts, built around the CH340C, TPS5420D, 74HC138 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Brickteam-RO/tilting-maze repository on GitHub, at the commit this page was made from: the board is pcb/motherboard/motherboard.kicad_pcb and its schematic pcb/daughterboard/daughterboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).