Skip to the content
12345678

TPS54231D

Texas InstrumentsExtended

-40℃~+150℃@(TJ) 1 110uA 2A 3.5V~28V 570kHz 800mV~25V Adjustable Buck Buck Built-in No SOIC-8 DC-DC Converters ROHS

Part id
ti/TPS54231D
Category
DC DC Converters
Package
SOIC-8
Pins
8
In stock
60,028 at JLCPCB (C28023)
Used on
3 open-source boards

Overview

The TPS54231D is a DC DC Converter made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+150℃@(TJ) 1 110uA 2A 3.5V~28V 570kHz 800mV~25V Adjustable Buck Buck Built-in No SOIC-8 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Pro:TPS54231DR, from EasyEDA Pro) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 60,028 are in stock at JLCPCB (part C28023). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1BOOT2VIN3EN4SS5VSENSE6COMP7GND8PH
EasyEDA_Pro:TPS54231DRFrom EasyEDA Pro

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

14
Supply, least
3.5 V · VIN, recommended operating min · p. 5
Supply, most
28 V · VIN, recommended operating max · p. 5
Supply, absolute maximum
30 V · VIN, absolute max · p. 5
Junction, hottest
150 °C · Operating junction temperature max · p. 5
Takes working
75 µA · VIN, non-switching supply current typical, VSENSE = 0.85 V · p. 6
Takes asleep
1 µA · VIN, shutdown typical, EN = 0 V, VIN = 12 V, −40°C to 85°C · p. 6
Gives
2 A · Continuous output current max · p. 9
Current limit
3.5 A · Current limit threshold typical, VIN = 12 V · p. 6
Feedback reference
800 mV · Voltage reference typical · p. 6
Switches at
570 kHz · Switching frequency typical, VIN = 12 V · p. 6
Junction to air (D)
116.3 K/W · Junction-to-ambient thermal resistance · p. 5
Junction to case (D)
53.7 K/W · Junction-to-case (top) thermal resistance · p. 5
Junction to board (D)
57.1 K/W · Junction-to-board thermal resistance · p. 5
Current limit
2.3 A · Switch current limit min, TPS54231 · p. 14

What it is and has

10
Converter topology
Step-down (buck), integrated high-side n-channel MOSFET · p. 9
Light-load efficiency
Pulse skipping Eco-mode · p. 9
Switching frequency
570 kHz · p. 1
Protection
Overvoltage transient protection · p. 1
Protection
Current limit, frequency foldback, thermal shutdown · p. 9
Package
SOIC8 · p. 1
Voltage reference accuracy
±2% initial, ±3.5% over temperature · p. 10
Output voltage
Externally adjustable using a resistor divider · p. 15
Protection
Thermal shutdown · p. 13
Light-load operation
Pulse skipping Eco-mode · p. 13

Around it

10
cap 0.1 μF
between BOOT and PH; Required ceramic bootstrap capacitor; X7R or X5R dielectric recommended. · p. 10
cap not exceed 27 nF
between SS and GND; External slow-start capacitor; set slow-start time between 1 ms and 10 ms. · p. 11
cap 10 μF
between VIN and GND; Input decoupling; X5R or X7R ceramic, rated above maximum input voltage; place close to VIN. · p. 15
cap 4.7 μF
between VIN and GND; Two capacitors in the design example; X7R dielectric rated for 50 V. · p. 15
cap 0.01 μF
between VIN and GND; Additional high-frequency input filtering in the design example. · p. 15
ind 10 μH
between PH and VOUT; Design example: Coilcraft MSS1038-103NL, saturation current 3.04 A and RMS current rating 2.90 A. · p. 16
cap 47 μF
between VOUT and GND; Two ceramic output capacitors, C8 and C9, in the design example; TDK C3216X5R0J476M rated at 6.3 V. · p. 17
cap 0.1 μF
between PH and BOOT; Required bootstrap capacitor C4; high-quality X7R or X5R ceramic. · p. 20
diode B240A
between GND and PH; External catch diode; anode to GND, cathode to PH. Design example uses Diodes, Inc. B240A, rated 40 V reverse and 2 A forward current. · p. 20
cap 100 μF
between VIN and GND; Typical electrolytic bulk input capacitor when the supply is more than a few inches from the converter. · p. 24

Specifications

49
ParameterConditionsAs printedPage
Input voltageVINmin -0.3 · max 30 V5
Input voltageENmin -0.3 · max 6 V5
Input voltageBOOTmax 38 V5
Input voltageVSENSEmin -0.3 · max 3 V5
Input voltageCOMPmin -0.3 · max 3 V5
Input voltageSSmin -0.3 · max 3 V5
Input voltageBOOT-PHmax 8 V5
Output voltagePHmin -0.6 · max 30 V5
Output voltagePH (10 ns transient from ground to negative peak)max -5 V5
Source currentENmax 100 uA5
Source currentBOOTmax 100 mA5
Source currentVSENSEmax 10 uA5
Source currentPHmax 6 A5
Sink currentVINmax 6 A5
Sink currentCOMPmax 100 uA5
Sink currentSSmax 200 uA5
Operating junction temperature, TJ TJmin -40 · max 150 °C5
Storage temperature range Tstgmin -65 · max 150 °C5
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pinsmin -2 · max 2 kV5
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pinsmin -500 · max 500 V5
Operating Input Voltage on (VIN pin)min 3.5 · max 28 V5
Operating junction temperature TJmin -40 · max 150 °C5
Junction-to-ambient thermal resistance RθJAD, 8 PINStyp 116.3 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)D, 8 PINStyp 53.7 °C/W5
Junction-to-board thermal resistance RθJBD, 8 PINStyp 57.1 °C/W5
Junction-to-top characterization parameter ψJTD, 8 PINStyp 12.9 °C/W5
Junction-to-board characterization parameter ψJBD, 8 PINStyp 56.5 °C/W5
Internal undervoltage lockout thresholdRising and falling; TJ = –40°C to 150°C, VIN = 3.5 to 28 Vmax 3.5 V6
Shutdown supply currentEN = 0V, VIN = 12V, –40°C to 85°Ctyp 1 · max 4 uA6
Operating – non switching supply currentVSENSE = 0.85 V; TJ = –40°C to 150°C, VIN = 3.5 to 28 Vtyp 75 · max 110 uA6
Enable thresholdRising and falling; TJ = –40°C to 150°C, VIN = 3.5 to 28 Vtyp 1.25 · max 1.35 V6
Input currentEnable threshold – 50 mV; TJ = –40°C to 150°C, VIN = 3.5 to 28 Vtyp -1 uA6
Input currentEnable threshold + 50 mV; TJ = –40°C to 150°C, VIN = 3.5 to 28 Vtyp -4 uA6
Voltage referenceTJ = –40°C to 150°C, VIN = 3.5 to 28 Vmin 0.772 · typ 0.8 · max 0.828 V6
On resistanceBOOT-PH = 3 V, VIN = 3.5 V; TJ = –40°C to 150°Ctyp 115 · max 200 mΩ6
On resistanceBOOT-PH = 6 V, VIN = 12 V; TJ = –40°C to 150°Ctyp 80 · max 150 mΩ6
Error amplifier transconductance (gm)–2 uA < I(COMP) < 2 uA, V(COMP) = 1 V; TJ = –40°C to 150°C, VIN = 3.5 to 28 Vtyp 92 umhos6
Error amplifier DC gain (1)VSENSE = 0.8 V; specified by design; TJ = –40°C to 150°C, VIN = 3.5 to 28 Vtyp 800 V/V6
Error amplifier unity gain bandwidth (1)5 pF capacitance from COMP to GND pins; specified by design; TJ = –40°C to 150°C, VIN = 3.5 to 28 Vtyp 2.7 MHz6
Error amplifier source/sink currentV(COMP) = 1 V, 100-mV overdrive; typical magnitude, stated as ±7; TJ = –40°C to 150°C, VIN = 3.5 to 28 Vtyp 7 uA6
Switch current to COMP transconductanceVIN = 12 V; TJ = –40°C to 150°Ctyp 9 A/V6
Pulse skipping Eco-mode™ switch current thresholdTJ = –40°C to 150°C, VIN = 3.5 to 28 Vtyp 100 mA6
Current limit thresholdVIN = 12 V; TJ = –40°C to 150°Cmin 2.3 · typ 3.5 · max 5.3 A6
Thermal ShutdownVIN = 3.5 to 28 Vtyp 165 °C6
Charge currentV(SS) = 0.4 V; TJ = –40°C to 150°C, VIN = 3.5 to 28 Vtyp 2 uA6
SS to VSENSE matchingV(SS) = 0.4 V; TJ = –40°C to 150°C, VIN = 3.5 to 28 Vtyp 10 mV6
TPS54231 device switching frequencyVIN = 12 V; TJ = –40°C to 150°Cmin 400 · typ 570 · max 740 kHz6
Minimum controllable on timeVIN = 12 V, 25°Ctyp 105 · max 130 ns6
Maximum controllable duty ratio (1)BOOT-PH = 6 V; specified by design; TJ = –40°C to 150°C, VIN = 3.5 to 28 Vmin 90 · typ 93 %6

Pins, by the datasheet

8
1 BOOT
Requires a 0.1-uF bootstrap capacitor to PH; insufficient capacitor voltage forces the high-side MOSFET off until refreshed. · p. 4
2 VIN
3.5- to 28-V input supply voltage. · p. 4
3 EN
Pull below 1.25 V to disable or float to enable; programming input undervoltage lockout with two resistors is recommended. · p. 4
4 SS
Slow-start pin; an external capacitor sets the output rise time. · p. 4
5 VSENSE
Inverting node of the transconductance (gm) error amplifier. · p. 4
6 COMP
Error-amplifier output and input to the PWM comparator; connect frequency compensation components here. · p. 4
7 GND
Ground pin. · p. 4
8 PH
Source of the internal high-side power MOSFET. · p. 4

Ordering codes, by the datasheet

3
TPS54231D
SOIC · 8 pins, package drawing D, package quantity 75 · p. 27
TPS54231DR
SOIC · 8 pins, package drawing D, package quantity 2500 · p. 27
TPS54231DRG4
SOIC · 8 pins, package drawing D, package quantity 2500 · p. 27

Open-source boards using it

3
  • 2 layers32 × 76 mmPletacka board, the printed circuit board in 3D

    Pletacka board

    Pletacka-IoT/Pletacka-board

    :pager: Electronic board for Pletacka-IoT project

    35 parts2MIT
  • 2 layers65.5 × 76.5 mmHeizungsregler, the printed circuit board in 3D

    Heizungsregler

    christof1977/kicad-heizungsregler

    basierend auf Raspberry Pi Zero - 10BaseT Ethernet (ENC28J60) - Schmalspur PoE: 24V Eingang über die äusseren Päärchen - Step-Down-Converter auf 5V - MBus-Interface zum Auslesen von Wärmemengenzähler - Anschluss für…

    119 parts
  • 4 layers85 × 56 mmPiVI, the printed circuit board in 3D

    PiVI

    kuba2k2/PiVI

    A small Pi-sized single board computer for your car

    289 partsGPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS54231D?

Yes. The symbol is EasyEDA_Pro:TPS54231DR and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS54231D?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the TPS54231D datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS54231D?

JLCPCB lists it as part C28023, with 60,028 in stock; the sellers' links on this page open their listings.

What can replace the TPS54231D?

Parts like it in the library: the XL1509-5.0E1 by XLSEMI, the XL1509-ADJE1 by XLSEMI, the XL1410E1 by XLSEMI and the XL1509-3.3 by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS54231D?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.