Skip to the content
12345678

OPA2365AID

Texas InstrumentsExtended

-40℃~+125℃ 0.2pA 0.2pA 100dB 1uV/℃ 2 2.2V~5.5V 200uV 25V/us 4.5nV/√Hz@100kHz 50MHz 5mA 65mA ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHS

Part id
ti/OPA2365AID
Category
Operational Amplifier
Package
SOIC-8
Pins
8
In stock
696 at JLCPCB (C130011)
Used on
7 open-source boards

Overview

The OPA2365AID is an operational Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+125℃ 0.2pA 0.2pA 100dB 1uV/℃ 2 2.2V~5.5V 200uV 25V/us 4.5nV/√Hz@100kHz 50MHz 5mA 65mA ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:OPA2365AIDR, from EasyEDA) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 696 are in stock at JLCPCB (part C130011). 7 open-source boards in 6 repositories on GitHub use it.

Symbol

5IN B+6IN B-7VOUT B
EasyEDA_Cloud:OPA2365AIDRFrom EasyEDA

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

12
Supply, least
2.2 V · V+ – V–, recommended operating min · p. 5
Supply, most
5.5 V · V+ – V–, recommended operating max · p. 5
Supply, absolute maximum
5.5 V · V+ – V–, absolute max · p. 5
Works from
-40 °C · Operating free-air temperature min · p. 5
Works up to
150 °C · Operating free-air temperature max · p. 5
Junction, hottest
150 °C · Junction temperature absolute max · p. 5
Takes working
9.2 mA · sum of two amplifiers' typical quiescent currents, IO = 0 mA · p. 7
Takes at most
10 mA · sum of two amplifiers' max quiescent currents, IO = 0 mA · p. 7
A pin gives at most
10 mA · Signal input terminal current absolute max magnitude · p. 5
Junction to air (D (SOIC))
115.5 K/W · Junction-to-ambient thermal resistance · p. 6
Junction to case (D (SOIC))
60.1 K/W · Junction-to-case top thermal resistance · p. 6
Junction to board (D (SOIC))
56.9 K/W · Junction-to-board thermal resistance · p. 6

What it is and has

10
Channels
Dual · p. 1
Package
D (SOIC, 8) · p. 1
Gain bandwidth
50 MHz · p. 1
Input and output
Rail-to-rail · p. 1
Input voltage noise density
4.5 nV/√Hz at 100 kHz · p. 1
Slew rate
25 V/µs · p. 1
Settling
0.3 μs to 0.01% · p. 1
Input offset voltage
100 µV · p. 1
Input bias current
0.2 pA · p. 1
Input topology
Zerø-crossover distortion topology · p. 1

Around it

1
res 10 kΩ
between VOUT and VNEG; Optional output pulldown to −5 V for a unity-gain buffer requiring an output level of 0 V; approximately 500 uA pulldown current. · p. 15

Specifications

44
ParameterConditionsAs printedPage
Supply voltageOver operating free-air temperature rangemax 5.5 V5
Signal input terminals, voltageRelative to power-supply rails; inputs are diode-clampedmin -0.5 · max 0.5 V5
Signal input terminals, currentOver operating free-air temperature rangemin -10 · max 10 mA5
Operating TAmin -40 · max 150 °C5
Junction TJmax 150 °C5
Storage Tstgmin -65 · max 150 °C5
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±4000 Vmax 4000 V5
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; ±1000 Vmax 1000 V5
Electrostatic discharge V(ESD)Machine model; ±400 Vmax 400 V5
Power supply voltage, (V+) – (V–)Over operating free-air temperature rangemin 2.2 · max 5.5 V5
Specified temperaturemin -40 · max 125 °C5
Operating temperaturemin -40 · max 150 °C5
Junction-to-ambient thermal resistance RθJAOPA2365, D (SOIC), 8 PINStyp 115.5 °C/W6
Junction-to-case (top) thermal resistance RθJC(top)OPA2365, D (SOIC), 8 PINStyp 60.1 °C/W6
Junction-to-board thermal resistance RθJBOPA2365, D (SOIC), 8 PINStyp 56.9 °C/W6
Junction-to-top characterization parameter ψJTOPA2365, D (SOIC), 8 PINStyp 9.5 °C/W6
Junction-to-board characterization parameter ψJBOPA2365, D (SOIC), 8 PINStyp 56.3 °C/W6
Input offset voltage VOSTA = 25°C, RL = 10 kΩ connected to VS/2, VCM = VS/2, VOUT = VS/2typ 100 · max 200 uV6
Input offset voltage versus drift dVOS/dTTA = −40°C to +125°Ctyp 1 uV/°C6
Input offset voltage versus power supply PSRRVS = 2.2 V to 5.5 V, TA = −40°C to +125°Ctyp 10 uV/V6
Channel separation, DCTA = 25°C, RL = 10 kΩ connected to VS/2, VCM = VS/2, VOUT = VS/2typ 0.2 uV/V6
Input bias current IBTA = 25°C; typical ±0.2 pA, maximum ±10 pAtyp 0.2 · max 10 pA6
Input offset current IOSTA = 25°C; typical ±0.2 pA, maximum ±10 pAtyp 0.2 · max 10 pA6
Input voltage noise enf = 0.1 Hz to 10 Hztyp 5 uVPP6
Input voltage noise density enf = 100 kHztyp 4.5 nV/√ Hz6
Input current noise density inf = 10 kHztyp 4 fA/√ Hz6
Common-mode rejection ratio CMRR(V−) − 0.1 V ≤ VCM ≤ (V+) + 0.1 V, TA = −40°C to +125°Cmin 100 · typ 120 dB6
DifferentialInput capacitancetyp 6 pF6
Common-modeInput capacitancetyp 2 pF6
Open-loop voltage gain AOLRL = 10 kΩ, 100 mV < VO < (V+) – 100 mV, TA = −40°C to +125°Cmin 100 · typ 120 dB6
Open-loop voltage gain AOLRL = 600 Ω, 200 mV < VO < (V+) – 200 mV, TA = 25°Cmin 100 · typ 120 dB6
Open-loop voltage gain AOLRL = 600 Ω, 200 mV < VO < (V+) – 200 mV, TA = −40°C to +125°Cmin 94 dB6
Gain-bandwidth product GBWVS = 5 Vtyp 50 MHz7
Slew rate SRVS = 5 V, G = 1typ 25 V/us7
Settling time tS0.1%; VS = 5 V, 4-V step, G = +1typ 200 ns7
Settling time tS0.01%; VS = 5 V, 4-V step, G = +1typ 300 ns7
Overload recovery timeVS = 5 V, VIN × Gain > VS; typical < 0.1 ustyp 0.1 us7
Total harmonic distortion + noise THD+NVS = 5 V, RL = 600 Ω, VO = 4 VPP, G = 1, f = 1 kHz; 3rd-order filter, bandwidth 80 kHz at −3 dBtyp 0.0004 %7
Voltage output swing from railRL = 10 kΩ, VS = 5.5 V, TA = −40°C to +125°Ctyp 10 · max 20 mV7
Short-circuit current ISCTA = 25°C; typical ±65 mAtyp 65 mA7
Open-loop output impedancef = 1 MHz, IO = 0 mAtyp 30 Ω7
Specified voltage range VSmin 2.2 · max 5.5 V7
Quiescent current per amplifier IQIO = 0 mA, TA = 25°Ctyp 4.6 · max 5 mA7
Quiescent current per amplifier IQIO = 0 mA, TA = −40°C to +125°Cmax 5 mA7

Pins, by the datasheet

8
1 VOUTA
Output, channel A. · p. 4
2 –IN A
Negative (inverting) input signal, channel A. · p. 4
3 +IN A
Positive (noninverting) input signal, channel A. · p. 4
4 V–
Negative (lowest) power supply. · p. 4
5 +IN B
Positive (noninverting) input signal, channel B. · p. 4
6 –IN B
Negative (inverting) input signal, channel B. · p. 4
7 VOUTB
Output, channel B. · p. 4
8 V+
Positive (highest) power supply. · p. 4

Open-source boards using it

7
  • 4 layers60 × 46 mmAFE v1, the printed circuit board in 3D

    AFE v1

    auselia/afe_pcb

    The first acoustic emission (AE) front-end board of Auselia. It turns the charge of a piezoelectric sensor into 14-bit samples and a wake-up signal.

    167 parts
  • 6 layers160 × 100 mmBuslab, the printed circuit board in 3D

    Buslab

    tombueng/hilprobe

    HILprobe: multi-function UUT probe for hardware-in-the-loop testing - RS-485, CAN FD, logic analyzer, 4-ch scope, two programmable UUT supplies. KiCad 10, 6 layers, RP2350B + ESP32-S3.

    429 parts
  • 2 layers38.6 × 24.6 mmTune in, the printed circuit board in 3D

    Tune in

    svgeesus/EuroMPE

    Eurorack MPE implementation, 2 to 8 voices

    27 parts2MIT
  • 2 layers125 × 21.5 mmADC Test, the printed circuit board in 3D

    ADC Test

    auselia/adc_test_board

    ADS7057 test board: perfboard SMA -> filters -> ADC + wake comparator -> ZedBoard PMOD (KiCad 10, JLCPCB-ready)

    101 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the OPA2365AID?

Yes. The symbol is EasyEDA_Cloud:OPA2365AIDR and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPA2365AID?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the OPA2365AID datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPA2365AID?

JLCPCB lists it as part C130011, with 696 in stock; the sellers' links on this page open their listings.

What can replace the OPA2365AID?

Parts like it in the library: the TS922IDT by STMicroelectronics, the LMV358B-SR by 3PEAK, the MC33178D by onsemi and the BUF634AID by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPA2365AID?

7 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.